What are the popular ones for learning computer hardware repair?

Repair your computer, depending on how good you are and what you want to learn.

1.Board level, is to change a board or something, this has no future, at most go to the computer city to install the machine!

2. Chip level, this is a bit of an electronic foundation, you can change the chip on a board or something!

3. Circuit design level, this is very difficult, you have to learn analog electronics, digital electronics, microcomputer principles, single-chip microcomputer, assembly language and so on.

Let's talk about what to learn?,Hard disks generally don't break very often.,Bad is a bad road.,With a bad road.,It's all going to be replaced.,Repair is not good.,You can change a disc.,Who is idle and has nothing to change the disc.,It's basically a hard disk.,Unless it's warranty!

In general, maintenance is not so detailed! You open a maintenance department, you can't fix things, you say, I'm sorry, I'll only repair the hard drive, your graphics card is broken, you better change places!

You can look at your own situation and deal with it specifically! Good luck!

Dude, I'm also engaged in this business, how to say it, it's not a hit, if it's to make a little money, there's no problem at all with a small meal, if you wait to make a fortune by this, it's impossible, now the social competition is too bad, the service industry is better than the service, you think slowly, the computer is finished, there will be direct insurance when it is generally sold, and it is generally guaranteed for three years in our place, and that thing generally can't be broken, it's broken, people are back to after-sales, and they won't take the silver to find someone else to repair, after three years, It's time for his computer to be replaced.,Hey.。。。

I think it's best to learn hard disk repair for hardware repair, because there is very important data in the general hard disk, and other people's hard disks are basically repaired if they are broken, and the first aspect is also relatively high, and the general maintenance and extraction of data will cost between 200-500 yuan! I think it's more profitable to fix this!

Now there are many maintenance training institutions, you will consider it in the selection, and you can learn more knowledge if you are good. At present, there are computer maintenance training in Nanjing, Shanghai, Hangzhou, Beijing, Shenzhen, Anhui, etc. I have also studied, I have been to many places to investigate, I was in Hangzhou Huali computer maintenance training and learning, this is OK, the geographical environment is very good.

I suggest you check it out. There is also Hongjing in Shenzhen, and the East in Beijing is also possible. In my inspection, Hangzhou Huali computer maintenance training is indeed okay.

Both software and hardware must be learned.

Software: system installation and maintenance, commonly used application software, application of system maintenance tools, virus protection, network and network maintenance, etc.

Hardware: electronic circuit foundation, computer main hardware and peripheral hardware products, CRT, LCD display.

Those who have studied the above and really possessed this kung fu should practice it for at least three years. Of course, computer maintenance can also be started in a month or two, but it can only be regarded as not refined.

Learn to be a man first, don't say that the part is not broken, and then... So learn to be a human being first.

1. You must read the computer motherboard manual, the computer motherboard manual is a good thing, and I started from here when I was an intern in a computer company. There are BIOS and wiring on the motherboard, which is very important.

2. You must learn to assemble the computer, assemble all kinds of accessories into a complete computer, and also be familiar with the main accessories of the computer, such as motherboard, CPU, memory, graphics card, hard disk, power supply, monitor, etc.

3. You must learn to install the operating system, and now there are three ways to install the machine.

1) DOS startup, win98 class

2) Clone version of ghost installed, such as XP clone version, this is simple, put it in the disk and follow the prompts, it will be installed automatically.

3) Fully installed, such as XP, Win7 installed version.

4. You must learn to use DOS, you must know the basic commands, and you must be familiar with the maintenance and data backup under the PE system. This is useful for basics, such as hard disk partitioning.

5. Learn the basic settings of the system and use this ratio is complicated, such as network settings, establishing users, installing software, etc.

6. Learn to set up a local area network, this is actually simple, as long as there is an opportunity for internship, it is very fast to get started, if you talk about it, it is more complicated than the effect, and now there is a lot of knowledge on the Internet, you can go and see.

7. Use more commonly used software and be familiar with them. Such as office software, optimization software, antivirus software, etc. A lot of times people who don't know much about computers will ask you for advice.

8. Go to online forums to see the troubleshooting methods of various software and hardware, understand the common troubleshooting methods, and continue to accumulate in practice. Learn the above items, basically it's almost the same, data recovery and the like, now there are special software.

There are many self-study and tutorial books in this area, and there are also many training courses in the society to study.

Generally speaking, if you want to reach a level that is slightly stronger than the guy (master) in the computer installation store, it is still easy to solve board-level hardware failures and system failures independently. The key is to love learning, love to study, be bold and careful to practice.

The order of learning is roughly as follows: understand the software and hardware composition and basic principles of the computer system, hardware identification (can identify the chassis power supply, various excuse slots on the motherboard, CPU, memory module, optical drive, etc.), learn to correctly assemble the spare parts into the whole machine and can be powered on, learn to adjust and optimize the motherboard BIOS, learn to use the substitution method to eliminate the fault of the main accessories, learn to install the operating system and drivers, learn to install application software, and learn to optimize and personalize the operating system.

Knowing this, it's basically no worse than the guys in the installation shop. If you learn how to overclock, BIOS modification and refresh, etc., the level will be more professional.

As for the level of board-level maintenance, it is necessary to go to a professional training institution to learn to master, which requires a relatively solid electronic technology foundation and strong hands-on ability, as well as professional maintenance equipment.

Basic (computer subject) electronic components.

Electronic circuit soldering technology.

Instrument Assembly (Computer Theme)Installation**Identification of Authenticity**Interface Optimization ConfigurationMaintenance (Computer Theme)Primary MaintenanceFault JudgmentMaintenance Tools Maintenance ProcessCPU (Computer Hardware)Understanding CPU Fan Fault Technical Data.

Fault Profiling Motherboard (Computer Hardware) Motherboard** Data Motherboard ChipBoard RepairHard Disk (Computer Hardware)Recognize Hard DiskHard Disk RepairData RecoveryHard Disk Teaching MaterialsPower Supply (Computer Hardware)Know Power SupplyPower SupplyRepair InstanceRepair TutorialOptical Drive (Computer Hardware)Recognize Optical DriveLaser HeadReplace Laser HeadVirtual Optical DriveRepair Memory (Computer Hardware)Recognize MemoryMemory TechnologyMemory RepairMemory ParametersGraphics Card (Computer Hardware)Recognize Graphics CardGraphics Card DriverGraphics Card RepairGraphics Card TestSound Card (Computer Hardware)Recognize Sound CardSound Card DetectionSound Card RepairIntegrated Sound CardNetwork Card (Computer Hardware) Know the network card, network protocol, network card repair, ADSL keyboard (computer hardware), know the keyboard.

Keyboard RepairKeyboard ProblemsKeyboard TestMouse (Computer Hardware)Mouse KnowledgeMouse RepairMouse ParametersMouse ProblemsMonitor Monitor BasicMonitor RepairMonitor TestLCD MonitorDOS (Computer Theme)OverviewCommon CommandsSystem Configuration Error PromptsSystem (Computer Theme)Operating SystemSystem System OptimizationSystem ProcessesRemove JunkRegistry CommandsRegistry Repair Registry Detailed ExplanationRegistry Security (Computer Theme)Network Security Trojan Removal Computer Virus Hacking Techniques.

On the software side, you learn:

1: System installation (CD-ROM boot installation, U disk boot installation, mobile hard disk boot installation);

2: Initialize the hard disk (that is, change the hard disk back to the state when you bought it, sometimes the system has a major stubborn error, the system can't be installed, after initializing the hard disk, you can install the system,);

3: Network settings.

4: Update and install various hardware and software drivers.

The software can solve all the problems, among which the initialization of the hard disk is the most important, as long as the hard disk is initialized, everything is solved, and the system is reinstalled directly.

Hardware: I'm not a hardware professional, so I can't mistake people's children, the hardware is very miscellaneous, very wide, difficult to learn, in fact, the general maintenance of computers is only responsible for the software, hardware problems, directly said broken, for a new one, the rest is also a software thing.

To reiterate, you don't need to learn computer maintenance systematically, just get what I said above.

It doesn't matter if you are optimistic or not, as long as you are skilled and skilled, no matter how down-and-out the industry is, you will have a bowl of rice to eat. For example, the mechanical watch repair industry has shrunk, but there are few good watch repairers and few ......

It's still good. It's better than a part-time job.

Pure hardware maintenance skills are too single, the hardware update speed is too fast, and the old ones are generally eliminated directly and replaced with new ones, and it is recommended to overhaul software and hardware.

1. All hello friends!

Computer hardware maintenance requires specialized circuit board knowledge and equipment, and computer hardware is divided into CPU power supply, motherboard, hard disk, memory, graphics card, and monitor.

Computer systems and software can be reinstalled There is no repair, only the concept of maintenance. The main thing is the maintenance of the data. This depends on the specific software, a simple reinstallation will take 1 week to install a few, and the complex database also needs 1-3 months to learn and master.

If you have poor English and computer foundation, it is recommended to find a good computer maintenance training school, register for a class for systematic learning, if my answer is helpful to you. Please click the "Select Satisfactory Answer" button below my answer. Adopt it in time and you will get 5 Fortune.

Chip-level repair or simple maintenance.

I've been doing it for 3 years, and now I don't dare to say that I'm an apprentice.

Simple maintenance is much simpler.

It depends on what you want to learn If it's at the board level, it's easy to learn, just figure out the model, replace the motherboard if the motherboard is broken, replace the display when the display is broken, but if you want to learn chip-level maintenance, it's difficult, but it's also more profitable.

It's easy to say it's easy to say it's difficult to say it's hard If it's hardware maintenance, it's simple to try to replace the accessories, but the difficult thing is to encounter some software systems and other messy and strange problems, which have to be accumulated slowly by yourself What's more difficult is the network architecture and server.