Fish pond suction height and suction power, fish pond suction and low suction position

The relationship between the suction height and the suction power depends on the shape and depth of the fish pond and the flow rate of the pump. Normally, the height of the face suction inlet in the main pool depends on the situation. If the flow rate of the pump is small, the surface suction inlet can be slightly closer to the water surface; If the flow rate of the pump is large, the face suction inlet can be appropriately deeper.

When the water surface is vertical, it is best to raise the noodle suction inlet 2 to 3 cm higher than the water surface, so that the noodle suction can be placed in the right position during feeding and avoid sucking away the food. If it is the opening height of the sedimentation bin, it is generally about 20 to 30 cm below the water surface of the sedimentation bin. It should be noted that the above values are for reference only, and the specific situation needs to be adjusted according to the actual breeding environment and equipment conditions.

The face suction is best placed diagonally under the water. It is best to use an elbow to suction the direction of the surface, so that there are dirty things on the water surface to rush to the vicinity of the surface suction, the surface suction is best placed slightly obliquely, the height does not know what height you are talking about, if it is the opening height of the sedimentation bin, it is generally about 20 to 30 below the water surface of the sedimentation bin.

If it is a noodle suction inlet.

At the height of the main pool, this depends on the size of your pump flow, if the flow is small, it is slightly closer to the water surface, and the flow rate can be appropriately deeper, this should be adjusted slowly, there is no accurate value, but your noodle suction inlet is better than the water surface when it is 2 to 3cm higher than the water surface, so that when you feed the food, you can put the noodle suction right will not suck away the food, and then put the noodle suction oblique after feeding, this is the koi that I have raised for four or five years.

Build your own pool.

experience, hope it can help you.

The position of fish pond surface suction and low suction is selected as follows: several troubles.

1.For example, if the shape of the fish pond is square or rectangular, then the suction should be placed diagonally on the surface of the fish pond, so that debris and residual food can be better collected and cleaned up on the water surface.

2.The low suction position should be selected at or near the bottom of the fish pond**, so that the dirt and residual food at the bottom of the fish pond can be better extracted.

It should be noted that the selection of the position of the surface suction and low suction of the fish pond needs to consider the shape, size, water flow and water quality of the fish pond, because the potato eggplant cover needs to be adjusted according to the specific situation in the actual operation. At the same time, in order to ensure that the water quality of the fish pond is clean and hygienic, it is recommended to clean the sedimentation bin and filtration system of the fish pond regularly.

Face suction is placed diagonally on the flush of the sock flush under the water. It is best to use an elbow to suction the direction of the surface when entering the water, and if there is dirt on the water surface, it will be rushed to the vicinity of the surface suction, and the face suction will be placed slightly obliquely. If it is the opening height of the sedimentation chamber, it is generally about 20 to 30 below the water surface of the sedimentation chamber, if it is the height of the surface suction inlet in the main pool, this depends on the size of your pump flow, if the flow is small, it is slightly closer to the water surface, and the flow rate can be appropriately deeper, this should be adjusted slowly, there is no accurate value, it is so pure but your cong annihilation surface intake inlet is better than the water surface 2 to 3cm higher than the water surface when it is vertical. In this way, when you feed the food, you can suction the dough upright so that it will not suck away the food, and then suck the dough and put it obliquely after feeding.

The right water temperature can make the fish in the fish pond more lively, which increases the suction of the face. 3.Add aquatic weeds:

Adding aquatic plants to the fish pond can make the fish in the fish pond more attractive, thus increasing the suction of the face. 4.Add Water Flow:

Adding water to the fish pond can make the fish in the pond more attractive, thus increasing the suction of the face. 5.Add Fish Tank Light:

Adding a fish tank light to the fish pond can make the fish in the fish pond more easily attracted, thus increasing the suction power of the face. Hope it helps you <>

Hello, I'm glad to answer for you Xiaomingchun, the following is the answer to your query1Add more fish food: Adding more fish food to the fish pond can make the fish in the fish pond more easily attracted, thus increasing the suction power of the face.

2.Control the water temperature: The right water temperature can make the fish in the fish pond more lively, which can increase the suction power of the face.

3.Add aquatic weeds: Adding aquatic weeds to the fish pond can make the fish in the fish pond more easily attracted, thereby increasing the suction of the face.

4.Add water flow: Adding water flow to the fish pond can make the fish in the fish pond more easily attracted, thus increasing the suction power of the face.

5.Add a fish tank light: Adding a fish tank light to the fish pond can make the fish in the fish pond more easily attracted, thereby increasing the suction power of the resistant surface.

Hope it helps you <>

How thick a pipe is needed for 15 tons of water, where is the pipe installed, and how high it needs to be.

Hello, I'm glad to answer for you, the following is the answer for your inquiry, 15 tons of water need to use a pipe with a diameter of 100mm, which can be installed on the ground or underground according to the actual situation, the height depends on the water source Xiao Mingchun and the drainage location of the high acacia stupidity difference, generally need to be 1-2 meters higher than the water source. We hope to help you <>

It is the fish pond surface that absorbs impurities, how can it absorb a large amount of water, and the circulation is fast.

How can it be higher than the surface of the water to absorb water?

Hello, I'm glad to answer for you, the following is the answer to Xiao Mingchun's inquiry to meet resistance, 1The use of a larger suction net can increase the amount of water absorbed; 2.The use of finer sieves can reduce impurities and improve water absorption; 3.

Improving water quality can increase water absorption; 4.Improving water flow can increase the circulation rate; 5.The increase of water pump can improve the circulation speed; 6.

Regularly cleaning the water absorption net can improve the water absorption and circulation speed. Hope it helps you <>

The following is the answer for your inquiry, the principle of water absorption on the surface of the fish pond is to use the gravity of the water surface, and the water flows into the fish pond from the water surface, so that a water flow circulation is formed Xiao Mingchun, the speed of the water flow circulation depends on the height of the water surface, the higher the water surface, the faster the speed of the water flow cycle. In addition, the fish pond surface absorbs a large amount of water, and the height of the water surface can be adjusted according to the actual situation, so as to control the water absorption. Hope it helps you <>