How to maintain epoxy self leveling flooring?

Epoxy self-leveling floor maintenance is recommended to use the Fei Vashi Protector, which is very simple to use, and the Protector is evenly coated on the ground with a slightly damp sponge, which can keep the floor smooth and clean, improve corrosion resistance and pressure resistance. This product from Finnas is very easy to use, and the dosage is very economical.

Epoxy self-leveling flooring, how to maintain the self-leveling floor, should be according to some of his related conditions, to maintain a little better, according to its flatness and its comfort to maintain.

After 24 hours, remove it so that the amount of condensate is determined. 3. The epoxy self-leveling primer layer primer layer is mixed and stirred evenly with the main material and curing agent in proportion, and the base surface is brushed, which is required to be uniform and without omission. Objective.

Floor paint is a very practical material, the cost is relatively low, the construction method is relatively simple, some people know that some people do not know much about floor paint, in fact, this kind of paint is used more in large factories, but now it is also used at home.

How to maintain epoxy floor self-leveling floor?

Epoxy ground self-levelingHow to maintain the groundEpoxy floor paint should be waxed frequently to improve abrasion resistance and scratch floors, usually once a month. The floor should be clean and dry, and then waxed with special floor wax or emulsified water-based wax.

Epoxy ground self-levelingHow to maintain the groundThe softening temperature of the epoxy flooring material is about 80°C, so the speed of the vehicle should not be too fast, so that the friction force when applying the brakes when braking heats up on the ground, so that the epoxy floor softens instantaneously and produces stains that are difficult to clean due to the influence of friction.

Epoxy ground self-levelingHow to maintain the groundWhen cleaning epoxy flooring every day, it is essential to choose one that contains a small amount of detergent or cleaning solution. After cleaning with a special floor cleaner or a wet mop, it must be reused. Wash once and then wipe dry, leaving the edges of the floor without long-term water accumulation.

4. When transporting items, the action should be light, so as not to cause heavy objects to hit the ground and damage the ground.

Floor construction of epoxy floor self-leveling floor paint?

1. The new industrial floor should be used only after some maintenance, about 28 days.

2. Remove the surface of cement slurry, old paint and attached garbage. To completely remove the surface of the oil, use a royal oil cleaner.

4. A dust-free cleaner and a large vacuum cleaner should be used to clean the surface.

5. Apply putty to the obvious holes and depressions on the surface of the floor to fill the scratches. After drying, grind the powder.

6. We know that epoxy sealant has strong permeability, and a certain amount of diluent must be added when coating primer, so that the diluted primer can penetrate into the base layer and improve the adhesion between the coating and the layer. Base. The coating must be continuous and uninterrupted, and the amount of coating must only be saturated with the surface.

If you want to make this kind of ground at home, you may wish to refer to it, the color of the floor paint is also more, and it is easier to clean, and the green floor paint can make your environment closer to nature, which is a good color.

You can get it for free

2. Epoxy floor refers to the floor made by professional treatment, and the coating it generally uses is epoxy resin, which has the characteristics of environmental protection, energy saving, corrosion resistance, etc.

3. Epoxy spike or no floor will also add fillers, coatings and some additives in the process of making the ridge, which is widely used in the finishing of industrial floors.

After the construction of the self-leveling ground is completed, it should be maintained, and it usually takes seven days to ten days of oxidation before it can be officially used.