Why does the shock absorbing glue fall off behind the Seahorse S5?

Hello, if it is a new car, the shock absorber glue is off, it is a quality problem, if it is an old car, the shock absorber glue is off, it should be an aging problem, you can go to the repair shop to replace it.

Hello, with the use of the car, the rubber mat will also age, this is normal to appear loose or fall, you can replace it with a new one.

The shock-absorbing glue behind the Seahorse S5 will fall off, which may be caused by aging, or accidentally injured, it is best to check it.

You seem to have a rubber sleeve for the shock absorber behind it, which generally won't fall off, unless you use it for a long time and wear out, and it has been seriously damaged, and this needs to be replaced in time.

Hello, if it is a new car, it is a quality problem, go to the 4S shop and he will give you a free replacement, if it is an old car, it is an aging problem, you can go to the repair shop to repair it.

If the shock-absorbing rubber pad on the back of the Haima S5 car falls off, it may have something to do with the road conditions you are driving.

Hello, Haima S5 This car may be caused by a problem with the shock absorber, and it is recommended to replace the shock absorber.

Shock-absorbing rubber sleeve, if it falls off is a quality problem, if your car is in the warranty period, you can ask the 4S shop to replace it.

When the vehicle crosses the bumpy road, there will definitely be abnormal noise, and this abnormal noise will get bigger and bigger, although this thing does not affect safety, but it is really annoying, a rubber sleeve does not cost much,

Hello. Generally speaking, this thing will age, plus the vibration during driving, so there is a drop.

For the abnormal sound of the Youshi Seahorse S5 shock absorber and front suspension;

1.Check the tire pressure; High pressure can cause abnormal noise;

2.Check for abnormal damage, loose nuts, etc. at the junction between the suspension system and the upper and lower ends of the vehicle as a whole; Any loose connection will cause unusual noises;

3.Whether the self-locking nut on the piston connecting rod is tightened, and whether the bolt nut connected at the lower end is tightened; Any loose connection will cause unusual noises;

4.Are all parts of the pillar damaged? For example, is the vibration isolation block damaged? Is the buffer block damaged? Are the upper and lower cushions of the springs damaged? Are pressure bearings damaged? Are the other parts damaged?

5.Check the shock absorber and press the shock absorber with your hand to see if there is any abnormal noise.

Check if the shock absorber is failing:

1.When it is suspected that the shock absorber has failed, put the car flat and press the body hard, and the body can rebound no more than 2-3 times, which is normal; The vibration under the upper limbs cannot be stopped quickly, and the shock absorber is suspected to have failed;

2.When the shock absorber is upright, push and pull all the way by hand 5&mdash8 times; (The pneumatic shock absorber should be automatically stretched out after pushing and rising) The last 2-3 push and pull feeling judgment: the feeling judgment of the shock absorber damping force is normal, and the shock absorber is normal; Judge that the damping force of the shock absorber is abnormal (or the piston rod of the pneumatic shock absorber does not rebound), and the shock absorber fails;

The shock absorber will produce noise in actual use, mainly caused by the collision between the shock absorber and the leaf spring, frame or shaft, the damage or fall off of the rubber pad, the deformation of the dust cylinder of the shock absorber, and the lack of oil. The cause should be found out and fixed. There is noise, you need to check whether the installation is correct; If it is too hard or too soft, you need to check the spring and the parts that fix the shock absorber for problems; Check whether the cylinder head is tightened and whether there is any oil leakage.

Millions of car purchase subsidies.

Recently, I often receive messages from friends about "What's going on with the abnormal noise of the Haima S5 shock absorber", and now I will explain it to you. First of all, it is necessary to check the tire pressure, when the pressure is high, it will cause abnormal noise, and secondly, check whether there is abnormal damage to the connection between the suspension system and the upper and lower ends of the vehicle, such as liquid damage and loose nuts; Any loose connection will cause abnormal noise, and it is necessary to go to the 4S shop to find maintenance personnel for specific maintenance.

The anti-rolling shock can reduce the vibration of the frame and body and maintain the balance of the car's driving.

Reduce the reciprocating motion of the spring of the car when the car passes over uneven road surface, and ensure the driving comfort of the car, but if the shock absorber is too hard, it will completely suppress the reciprocating motion of the spring. The car is equipped with a shock absorber to ensure the safety and comfort of car driving, reduce the vibration amplitude of the car, and ensure the driving safety of the car.

Millions of car purchase subsidies.

Today, here is to explain to you the relevant knowledge about "Seahorse S5 bumps and abnormal noise". When the Seahorse S5 bumps and makes a noise, the first thing you should do is check if the shock absorber is leaking oil, or if it has more dust than the left side and still has oil. Or because the shock absorber spring is damaged in the bump, resulting in insufficient rebound force, and can not effectively store kinetic energy to play a shock absorption role.

Another reason is that the belt is loose.

Increased belt noise means that the belt is loose. Press down on the belt on the pulley with your fingers. If the depression is large, the belt is loose.

Transmission MaintenanceIn accordance with the original manufacturer's requirements, the driver should check the transmission oil regularly, change the transmission oil on time, and use the transmission fluid specified by the original manufacturer. The oil discharged through the drain bolt only accounts for about 30% of the total oil volume.

In this case, it is not recommended to use an arubber transmission cleaner. Cleaning the automatic gearbox without disassembling it will have a number of precautions during operation.

If incorrect products are used, counterfeit or shoddy products are not properly operated, it can easily cause accidents and can cause serious damage. Therefore, it is necessary to use products from well-known companies and legitimate channels at qualified service providers to ensure the safety of the gearbox.

Millions of car purchase subsidies.

1. The engine has abnormal noise.

Symptom description: There is a lot of abnormal noise in the engine compartment, and most people also judge it to be the abnormal noise of the engine compartment by the sound**, which is usually a metal screeching sound or a howling sound.

Solution: The abnormal engine noise indicates that the technical status of a certain mechanism of the engine has changed. It is mainly caused by excessive wear and tear of some parts or improper assembly and adjustment.

Some abnormal noises can still predict that the engine will be damaged accidentally, so when the engine has abnormal noise, it should be repaired in time to prevent the fault from expanding.

It should be reminded that if it is an abnormal noise in the engine, most of the owners will not be able to solve it by themselves, and it is best to send it to the factory for maintenance.

2. There is abnormal noise in the gearbox.

Symptom description: If there is a "rustle" sound inside the gearbox while the car is driving, and there is no more after pressing the clutch or accelerator, there will be a whistle-like sound when changing gears.

Solution: There are many transmission parts, and the reasons for the sound are more complex, so we should pay attention to whether it is related to a specific speed, such as some planetary teeth that sound at about 50km h.

Whether it is related to certain gears, which is very important for judging the failure of the transmission, if a certain gear sounds, it must be related to the components that affect the transmission of the gear; If all gears sound, it is often a common meshing shaft failure or a lack of oil in the transmission. Whether it is related to specific actions, such as increasing and decreasing gears, starting, rapid acceleration, sharp deceleration, turning, etc., are effective means to judge abnormal noise, among them, changing speed and direction are particularly important for judging the rear axle fault.

If the abnormal noise of the transmission is obvious, it is recommended to send it to a professional repair shop to check the faulty parts, and then replace them.

3. There is abnormal sound of wear.

Symptom description: When driving on the accelerator or brake, there is always some abnormal noise in a certain part of the body, the sound is not loud, and it does not affect normal driving, but it always makes people worry a little about the failure of the body.

Now, with the development of science and technology, the problem of abnormal noise can also be solved by not dismantling and repairing.

Replace the brake pads with softer materials.

Take a look at the problem of ** specifically, and find a professional master to take a look.