What s going on with your own home computer input method can t be called! The kind of tuning five st

I'll say a few ways you can't try it.

1。Press Ctrl + Spacebar first.

After popping up, press Shift+Ctrl

You can switch the input method.

2。Open the Control Panel, the Region & Language options, the Language Details key settings.

You can set the shortcut keys of the input method inside.

3。If you don't have five strokes and pinyin in the input method.

Same as above.

Open the Control Panel, Region & Language Options, Language Details, Settings, Add.

Here you can add Wubi and Pinyin input methods.

Don't forget to click OK after setting it up.

Necessary materials: computer, Windows 7 system.

1. Take the windows 7 system as an example, first find the windows 7 sound sign, as shown in the figure below;

2. There is a small, upward arrow logo on the toolbar, and the keyboard logo will appear when you left-click the place you need to enter, as shown in the figure below;

3. Left-click on this sign, a selection box of the input method will appear, and you can choose the input method according to your needs, as shown in the figure below;

4. Left-click on a dog input method, and the prompt box of the input method will pop up, as shown in the figure below;

5、See the prompt box to prove that the input method has been used normally,You can test it in the input box,As shown in the figure below。

1. First of all, check whether the CTFMON startup item of the input method has been started, if it is not booted up, then find "ctfmon" (input method) in the startup item, and select the boot start.

2. Control Panel == > Area & Language Options == > Language == > Details to set the input method.

3. In [Start] [Run(r).."internat"(without quotation marks) and press enter!

PS:Mainly used to control the input method,When your taskbar does not have an "en" icon,And the system has a process,You might as well end the process,Execute the internat command in the run。 This input control icon is used to change things like country settings, keyboard type, and date format.

It starts running at startup. It loads different input points specified by the user. The input point is from this location in the registry to hkey users

default keyboard layout preload of the load. Load the "en" icon into the icon area of the system, allowing the user to easily switch between different input points. When the process stops, the icon disappears, but the input points can still be changed from the control panel.

Do you have 360 Full Guard installed? If there is, you open 360 and then find Advanced Tools, click Boot Startup Item Management, find the Input Method Switcher tool, and then click Restore to start OK

I've tried a lot of advice on the Internet, but this one I found myself.

Now you have to press shift and ctrl to bring it up", "I was supposed to press shift and ctrl to bring up the typing box, but I don't understand, what are you pressing now?"

Judging by your situation, it may be poisoned, please find a good antivirus software to kill the virus.

Press Ctrl+Shift to switch inputs, or directly click the input method icon in the lower right corner of the machine to switch input methods.

See if you have ctfmon in the process...

Probably not. Then run msconfig --start and hook ctfmon!

Necessary materials: computer, Windows 7 system.

1. Take the windows 7 system as an example, first find the windows 7 sound sign, as shown in the figure below;

2. There is a small, upward arrow logo on the toolbar, and the keyboard logo will appear when you left-click the place you need to enter, as shown in the figure below;

3. Left-click on this sign, a selection box of the input method will appear, and you can choose the input method according to your needs, as shown in the figure below;

4. Left-click on a dog input method, and the prompt box of the input method will pop up, as shown in the figure below;

5、See the prompt box to prove that the input method has been used normally,You can test it in the input box,As shown in the figure below。

1. Check whether the input method indicator in the lower right corner of the taskbar exists;

2、When the input method indicator in the lower right corner of the taskbar is not there,Check whether the input method icon is an active window,Suspended in other positions on the desktop。

3. Then, hold down alt and shift at the same time (this will be the problem when installing the stool or uninstalling other input methods).

If it still doesn't work, try holding down the CTRL+Space (space) key at the same time, which is caused by switching the finger to the Chinese and English input method (the system is unstable or you have done system optimization and repair and other operations will cause such a problem).

1. Right-click on the blank space of the taskbar - toolbar - language bar.

Second, first open the text service.

1. Click Start, click Control Panel, and then double-click Region & Language Options.

2. On the Language tab, under Text Services and Input Language, click Details.

3. Under Preferences, click on the Language bar.

4. Select the "Turn off advanced text service" checkbox and remove the hook inside.

Third, secondly, set the input method of the language bar.

1. Click Start, click Control Panel, and then double-click Region & Language Options.

2. On the Language tab, under Text Services and Input Language, click Details.

3. Under Preferences, click on the Language bar.

4. Select the "Show language bar on desktop" checkbox.

If you have a text service installed, the language bar will be displayed automatically. However, if the language bar is turned off, you can use this step to redisplay it.

If you want to minimize the language bar to the taskbar, right-click the language icon on the taskbar, then click "Settings" and select the input method you want to use to add it.

Fourth, Sogou input method repair. Right-click the Sogou input method icon, and then select Manage Repair Input Method - Input Method Repairer. Click the one-click repair button on the pop-up interface,The system will automatically complete the repair,Fix the problems of the input method itself one by one。

Try typing while waiting for auto-completion, and hold Ctrl+Spacebar, the input method will automatically go to Chinese input mode.

Go to my computer --- control panel--- keyboard--- input method locale, and take a look at the configuration inside!

I can't bear it, and the problem doesn't look at the problem...

People can't switch, and it's not that they can't switch! ~

Go to File Services and Input Language! ~

Is it to delete other input methods?

Begin. Set up.

Control panel area and language options.

Language. Details.

Take a look at how many input methods there are inside.

Add ABC full spelling five strokes.

Try Ctrl+Shift again.

Hello. The input method can not be switched due to the virus, or it may be the cause of the program that the input method can not be switched, and there may be an error in the operation of the input method can not be switched, let's analyze the solution of the input method can not be switched, if it is the operation of the input method can not be switched, directly with ctrl+shift can not switch the input method.

Right-click the input method icon on the taskbar and select Settings. Then select the key settings, double-click the first "Switch between different input languages" and first tick "Switch input language" under select the left-handed alt. Uncheck the right before "Switch Keyboard Layout".

Then go to "Chinese (Simplified) Input Method."

Input method non-input method switch", cancel the check box before "enable key order". Roll out the settings after you've decided all the way.

Go to the settings again, go to "Switch between different input languages", and tick the one on the right. Exit when you're OK.

Enter the main interface, enter [Kill Trojan] 2, and then click [Quick Scan].

Let's take a look

Hello,You can go to the control panel regional language settings advanced input method settings to get it (I don't know very clearly,I'll give you a supplementary answer at night),It's really not good to consider reinstalling the system,(Suggestion:If you want to reinstall, it is recommended that you use the onkey anniversary version backup system after installation and adjustment,Next time there is a problem,Restore it,Solve the trouble of reinstalling the system in less than 3 minutes)

Open the "Region and Language Options" in the control panel, there is a "Details" in the "Language", click on it, and then in the "Advanced" option there is a "System Configuration", and remove the checkmark before "Turn off the advanced text service".

It depends on the situation that is a problem with the startup program of your input method.

Click Start->Run-> enter msconfig->Enter->Click Start-> check ctfmon (this is the input method icon to start the program)-> restart.