How do you wrap a large bouquet of flowers in wrapping paper?

Here's how to wrap flowers in wrapping paper:

Start by tying a bouquet with roses and lover's grass. Arrange the bouquet evenly so that the roses and lover's grass can be spread out more naturally and harmoniously.

Prepare a piece of rose-red hand-kneaded paper, place the square at an angle, and fold the bottom corner of the paper up a small corner; I put a bouquet on hand kneading paper.

Wrap both sides of the paper tightly around the bouquet and not too tightly to make the package look natural and fluffy; Grasp the wrapping paper evenly with your hand at the handle of the bouquet and tie it with tape.

Then knead the purple paper by hand, follow the way the first paper is placed, but a few centimeters higher than the first paper, and then wrap the bouquet on both sides in the same way and arrange it evenly. Because the front of this second sheet is to be revealed, the paper should not be crumpled.

When kneading a piece of paper with a rosy red hand, it is okay to be a few centimeters higher than the second piece of paper or the same height as the second sheet; Fold the extra pieces of paper on the left and right sides into it to show the second piece of paper.

Wrap the paper along the bouquet, leave a gap for the second piece of paper, and then fix it with tape for a long time.

<> cut out half of the other piece of rose-red hand-kneaded paper, fold it in half and then fold it out a third of the position, so that its width is as wide as the handle of the flower stem, wrap the paper in the position of the handle of the flower pole and fix it with tape.

Finish. The finished product is shown below.

It's very simple, the first step is to bundle the bouquet, the second step is to spread out the wrapping paper, the third step is to put the flowers on the wrapping paper is ** one hand erect the bouquet to stabilize, the fourth step is to close the wrapping paper and withdraw the bouquet with both hands to hold the bouquet that is wrapped in the wrapping paper, the fifth step is to arrange it according to your liking, whether it is messy or neat, and finally you can tie the bouquet with ribbons and tie the bow.

Summary. The packaging of wrapping paper, most of which depends on the feel and preferences of the florist, many florists who like minimalism may only use a piece of paper to wrap it, and pay more attention to the floral art and the flower itself. There are also florists who are very good at using the shape and material of the wrapping paper, and it is possible to use five or six, seven or eight sheets of wrapping paper.

The packaging of wrapping paper, most of which depends on the florist's feel and preferences, many florists who like minimalist may only use a piece of paper to wrap it, and pay more attention to the floral and flower itself. There are also florists who are very good at using the shape and material of the wrapping paper, and it is possible to use five or six, seven or eight pieces of wrapping paper.

The same is the bouquet of about three or four Qiwei thick ten mountains and forests, and the Korean-style flower quiet bunche will pay more attention to the use of wrapping paper, and various forms and materials can be mixed, cellophane, Sydney paper, matte paper, etc., adding up to 8 sheets. European-style bouquets will be weaker for the use of wrapping paper, and there will be more paper in the wrapping paper than plastic, adding up to about 3-4 sheets in total. The number of wrapping paper in the Russian and Japanese bouquets is relatively standardized, and the folding style is also relatively uniform, about 7-8 sheets.

Sydney paper, light and low price, but not waterproof, easy to break and tear, when using the water soaked, you have to pay attention to Oh, Sydney paper's unique sense of air, will make the bouquet appear softer and three-dimensional, suitable for the bottom layer, and the wrinkled Sydney paper is very good-looking. When the pear paper is not exactly used for good-looking, it is more used as the lining of the bouquet to protect the flowers on the edge of the bouquet, and the pear paper is softer and lighter, and will not press the petals to cause damage.

How many pieces of wrapping paper do you need for a bouquet with a diameter of about 15 20 cm?

This question needs to consider the size and thickness of the wrapping paper, as well as the way it is packaged. Generally speaking, if you use the traditional packaging method, you need at least two pieces of wrapping paper, one to wrap the bouquet in the flower world, and the other to make a garland or wrap the bottom of the bouquet. If the wrapping paper is 50-70 cm, then about two pieces of wrapping paper are needed for a bouquet of about 15-20 cm.

The steps for a paper package bouquet are as follows:Tools: bouquet paper, scotch tape, ribbon.

1. Fold the transparent wrapping paper diagonally.

2. Wrap the bouquet in turn with transparent wrapping paper, and fix the grip with transparent tape for each layer of packaging.

3. Wrap the bouquet in turn with monochrome wrapping paper, completely cover the transparent wrapping paper, and fix the grip with transparent tape for each layer of packaging.

4. Tie the prepared French knot ribbon and tie the knot to fix the grip, you can choose the bow when tying the knot to make the packaging more exquisite.

5. A beautiful bouquet of flowers is packaged.

Here's how to wrap a bouquet in a piece of paper::Tools: wrapping paper, double-sided tape, flowers.

1. The single wrapping paper is trapezoidal paper, with long and short sides at both ends, one end of the long side is folded in half, and the midpoint is found and slightly pressed as a mark.

2. Start the diagonal roll from the midpoint.

3. The tighter the stack of the roll, the thinner the cylinder that comes out, and the narrower the opening, and the tightness depends on the amount of flowers you want to put.

4. The closing part is fixed with double-sided tape.

5. Just put the flowers that need to be delayed in it.

The steps for wrapping paper to wrap the bouquet are as follows:

1. Select the paper.

You can wrap flowers in almost any kind of paper. If you want a simple, classic look, choose plain brown kraft paper. To look more stylish, opt for wrapping paper or decorative wrapping paper. For a unique look, consider using: newspapers

Pages of old books, sheet music, colored tissue paper.

2. Put the flowers on the paper.

Secure the middle of your flower stem with a rubber band. This will make them easier to pack and prevent them from falling apart on your paper. Place the flowers on the paper so that the rubber band is aligned with the folded edge of the paper.

A small portion of the stem will be wrapped. However, the flowers should be covered with a lot of paper while exposing a large number of stems.

3. Fold the paper in half.

Place your paper on the table so that the printed or colored side is side down. Turn the side closest to you up so you can fold it halfway or so. Fold the paper at an angle so that some of the flat side is exposed.

If you don't use colored paper, you should still fold the paper at an angle. This will create decorative folds in the packed bouquet.

4. Wrap the paper around the flowers.

Fold one side of the paper and cover it over the flower so that the paper can reach the other side. Then you can roll up the bouquet so that all the paper is wrapped, or you can fold the other side of the flower. This method gives the bouquet a bit tapered and wraps around flowers of different sizes well.

5. Take a few sheets of transparent double-sided tape and place them on overlapping paper.

Press the attached bouquets together so that the wrapped bouquet doesn't fall apart when you remove your hand. If you don't have straps, you can use hemp rope or string. You just need to wrap the rope or hemp rope tightly so that the paper doesn't open.

Wrap a bow around the bottom of the paper to complete your bouquet with the bow intersecting the stem.

How to wrap the bouquet is as follows:

Prepare materials: a bouquet of flowers, scissors, double-sided tape, string, thin sandpaper, thick paper, and a bow.

1. Use scissors to trim the flowers into the desired shape, and then cut the thick paper into a rectangle.

2. Wrap the bottom of the flowers, and finally fix the bundle with a rope, and cut the thin sandpaper into a large square with scissors, and the side length is about 5cm higher than the top of the bouquet.

3. Wrap the flowers with thin sandpaper, fix the thin sandpaper with a rope, and stick a big bow on the outside of the bouquet with double-sided tape.

Introduction of wrapping flower paper:

There are many kinds of flower wrapping paper, common ones are kraft paper, kraft newspaper, cellophane, hemp sheets, Ouya paper, Sydney paper, matte paper, Hansu paper, mesh and so on.

The packaging of kraft paper is especially suitable for matching with pastoral style, literary and fresh bouquets to create an elegant retro fashion style. Kraft newspaper has a unique sense of vicissitudes than kraft paper, printed with text, looks like an old newspaper, and is suitable for matching bouquets with a sense of literary style and retro fashion.

Cellophane is essential for almost all bouquets, and one of its key functions is to waterproof the ground of the bouquet, using it to wrap the bottom of the bouquet to introduce a small amount of water.

Wrapping paper is one of the important materials for packaging bouquets, which can better protect and decorate the bouquet and make it more beautiful and generous. So, how do we use wrapping paper to wrap a bouquet? Let's introduce it to you.

1. Prepare tools and materials.

Wrapping paper, scissors, tape, ribbons, dried flower materials, and flowers that need to be packaged.

2. Make a bouquet.

First of all, we need to organize the flowers that need to be packaged, cut the flower stems and arrange them uniformly to make a beautiful bouquet.

3. Cut the wrapping paper.

Place the wrapping paper on a flat surface, lay the bouquet flat on the wrapping paper, choose a suitable size wrapping paper, and use scissors to cut out a suitable size along the edge of the paper.

Fourth, packaging bouquets.

Place the bouquet on the top of the wrapper, slowly pull up the sides of the wrapper, fold the bottom of the paper slightly inward, then fold the upper edge of the two wrappers in half and press them tightly to form a gap, use scotch tape to glue them tightly.

5. Decorate the bouquet.

Wrap a beautiful ribbon around the bouquet and match the color of the flower with the color of the ribbon to enhance the visual effect. You can also place dried flower materials on the bouquet to add interest to the bouquet.

Finally, cut off the rest of the wrapping paper to make it just the right length, adjust the placement of the bouquet a little, and you're done!

It should be noted that care should be taken to protect the bouquet during the packaging process to prevent the bouquet from being flattened or the flowers from loosening. At the same time, also pay attention to the color and style of the wrapping paper, which should match the style of the bouquet. In this way, the whole bouquet will be more beautiful and generous, bringing people a pleasant visual enjoyment.

Wrapping paper is an essential item for us to wrap a gift or bouquet. But when it comes to packing bouquets, there are a few tricks we can employ and use minimal wrapping paper to wrap the bouquets. Next, this article will introduce some useful tips for you.

1.Choose the right paper size.

When packing a bouquet, start by choosing the right paper size. If you choose too large paper, you will waste a lot of material; If you choose paper that is too small, it will be difficult to pack neatly. Therefore, it is crucial to choose the right paper for the size of the bouquet.

2.Make a suitable triangular paper bag.

Making triangular paper bags is a great way to wrap bouquets. All you need to do is fold a piece of paper in the shape of a long key spring bucket bar in half into a triangle, then fold the corners on both sides into a triangular paper bag, and then cut the bottom into the shape of the bottom of the bouquet. This method uses minimal wrapping paper and is easy to do.

3.Fold the paper bag to reduce the overlap of the bottom material.

When packing a bouquet, it is common to wrap the bottom of the bouquet in paper, which can increase the aesthetics of the bouquet. But when packing bouquets, the paper at the bottom tends to overlap each other, resulting in an increase in the amount of wrapping paper used. In order to reduce material overlap, we can fold the paper at the bottom, which can effectively reduce the amount of paper used.

4.Use garlands instead of vases.

After packing the bouquet, we need to put the bouquet in the vase. However, vases are too heavy and take up a lot of desk space. In this case, we can replace the vase with a garland, just by fixing the bouquet to the garland, we can create a beautiful wreath while also reducing the use of packaging materials.

5.Use reusable packaging materials.

In addition to using minimal wrapping paper, we also have the option of using reusable packaging materials. For some simple bouquets, such as roses or tulips, we can use materials such as satin, ribbon or gauze to wrap them. These materials can not only effectively reduce the use of packaging materials, but also increase the texture and beauty of the bouquet.

Summary. In the process of packing bouquets, there are a few tricks we can employ to minimize the use of wrapping paper. By choosing the right paper size, making triangular paper bags, folding paper bags to reduce bottom material overlap, using garlands instead of vases, and using reusable packaging materials, we can create beautiful, eco-friendly bouquet packaging.