The winrar file cannot be opened, and the message Folder cannot be created .

Updated on technology 2024-02-09
16 answers
  1. Anonymous users2024-02-05

    Please don't steal my answer!!

    Plan 1 [New P].

    Note [Original]:

    1 In safe mode, the effect is even better!

    2.All the software to be used below should be installed or upgraded to the latest version to ensure the effectiveness of use.

    3.It is not antivirus, and the following methods can be used directly. If it doesn't work, use a high-quality antivirus (e.g. Kaspersky) in safe mode to kill it, and it's best to use 360 Security Guard as well.

    Use 360 Security Guard's "Trojan Horse" - Full Scan". Kill and restart. )

    You don't have to use all of the following methods, you can try them one by one. Sometimes, just the first one works.

    One. Close the browser, open the "System Repair" of the new version of 360 Security Guard, and select "Home Repair", "System Repair" and "IE Repair" as a tick (you can also select all.) At least select "System Repair"), and then click "One-click Repair".

    Too lazy to install it, just use the 360 first aid kit) .

    Then use the 360 first aid kit. [Follow the steps: "Start First Aid" first; After scanning, if a Trojan horse appears, click "Isolation"; Then click "Repair" (you can select all of them to Fix Now".

    Next, click on "Recover Lost DLL Files", add the missing DLL files that the system detected during detection, and then click "Repair Now". Repair Network is a case-by-case decision to fix or not. When you're done, you should restart.

    Two. Scan with 360 Security Guard's "Clean Plugins" to clean up malicious plugins. When you're done, you should restart.

    Three. Use Windows Cleanup Assistant (from the web**). After scanning (if you sweep things out, check them all and clean them), then use Fault Repair (select all), and then right-click on the desktop to refresh. Works well in safe mode.

    You can also consider using the Kingsoft First Aid Kit [After point scanning, if there are items that can be repaired, after selecting all, point repair can be done. 】

    Emphasis ---1In the repair, when there is a prompt in Kill Soft or 360, please click Allow. Restart the computer if prompted to restart during operation.

    2.When the effect is not good, look at the three points in "Attention". 3.

    After that, if the effect is not good, you can also consider system restoration (choose a restore point).

  2. Anonymous users2024-02-04

    On the first floor, I don't bother to steal it if I look at you.

    Uninstall the winrar software, reinstall it, and try to open it again. If not, it's a matter of documentation. Let's admit it.

  3. Anonymous users2024-02-03

    In the process of using Windows on the computer, the compressed file cannot be created, and the message indicates that the file may be in use because the file is being opened and the compression is invalid.

    Therefore, it is necessary to be on the computer desktop.

    , close the relevant file application and then recompress it to achieve good results.

    Regarding the correct use of computers, you can communicate more with technical personnel, and learn to communicate with others to pay attention to effective forms of communication.

    1.Develop a positive communication mindset.

    First of all, communication is the communication of the heart, the heart is also the mentality, a good attitude can have positive thinking, with positive thinking can have a positive expression, so as to achieve positive communication.

    Sunshine mentality", I think this is the mentality needed to achieve effective communication and harmonious communication, no wonder many people say that "attitude is everything".

    If you want to do a good job in communication, you must first change your mentality, change your bad mentality, and change your bad state. Only with a good attitude can we have positive and correct thinking. Correct mentality, positive thinking, and positive expression are the prerequisites for effective communication.

    2.Master the art of criticism.

    In the course of the conversation, if you have to criticize the other person, be sure to bring it up tactfully. Ming's criticism has the following characteristics:

    Don't criticize in front of others.

    Criticism should be preceded by words of affection and appreciation, and then the criticism should be introduced with a twist such as "but", i.e., in a euphemistic way.

    Criticize the other person's behavior rather than the person's personality. Criticize others in a consultative tone rather than a commanding tone.

    It's a matter of facts. 3.Recognize the other person's conversation and make the conversation relaxed and pleasant.

    If you can talk about the same opinion as the other person, the other person will naturally be interested in you and have a good impression of you. Anyone who agrees with their opinion will see it as a way to increase their own worth and self-esteem.

    and then express acceptance.

    If we have to disagree with someone's point of view, we must also identify something that we can agree with and create the conditions for continued dialogue. In addition, you should also use your brain to have a pleasant conversation. Unless you are a close friend, don't talk about unpleasant and sad things.

    4.Learn to listen and don't interrupt others.

    Ideal relationships.

    It is based on the exchange of ideas. It's important to listen to the other person before you get straight to the point.

    Rush to express your point of view and hope that others will quickly accept your point of view. Somewhat impatient thoughts. Often say things that make others misunderstand. It is often expressed frivolously and not calmly enough.

  4. Anonymous users2024-02-02

    You may not have compression software installed, open or compress files, and need to install compression software, Winrar, or Winzip. If the compressed file has been installed and may not be damaged, you can also copy the source file in the cavity of Wu Qiaoshan, paste it as a copy, and then try to perform the old operation.

  5. Anonymous users2024-02-01

    Make sure you have compression software installed. Restart your computer and you're done!

  6. Anonymous users2024-01-31

    Don't put it on the C drive, put other disks, the C disk should only put the system files, if the other disks are not good, such as the F disk, right-click the F disk, Properties, cancel"Read-only", quotas, cancel quota management and try it.

  7. Anonymous users2024-01-30

    Right-click the compressed file, click "Change" in the properties to select the compressed file, which is due to the absence of "Open Method".

  8. Anonymous users2024-01-29

    Is it a registered version of the paid version of the winrar software?,Maybe the trial has expired.。

  9. Anonymous users2024-01-28

    <>2. Click on the winrar archive, enter the name, and the creation is successful.

    3. If it can't be established. Consider:

    1. The space of the C drive is not enough, delete the files and reserve space.

    2. The security software blocks it, and you can close the security software.

    4. There is a similar restoration wizard software to block, just exit.

    5. There is a hardware tool such as a hard disk restore card to prevent it, just unplug it.

    6. If there is an impact of the virus, observe after the overall anti-virus.

    7. Hard disk failure. Replace the hard drive.

    8. If there is a problem with the hard disk data cable, replace the data cable.

    9. If there is a problem with the operation, check the operation.

  10. Anonymous users2024-01-27

    Can't create a new RAR folder on the desktop? I don't quite understand what you mean.

    You have to select a folder and right-click on it to compress it.

  11. Anonymous users2024-01-26

    Caused by corruption of certain files in the system;

    The easiest way to recover it is to reinstall both software, and that will be the solution.

  12. Anonymous users2024-01-25

    Just reinstall it all over again.

  13. Anonymous users2024-01-24

    It's weird. And there's this thing.

  14. Anonymous users2024-01-23

    <>2. Click on the winrar archive, enter the name, and the creation is successful.

    3. If the first resistance cannot be established. Consider:

    1. The space of the C disk is not enough, delete the files that are not in the family, and reserve space.

    2. The security software blocks it, and you can close the security software.

    4. There is a similar restoration wizard software to block, just exit.

    5. There is a hardware tool such as a hard disk restore card to prevent it, just unplug it.

    6. If there is an impact of the virus, observe after the overall anti-virus.

    7. Hard disk failure. Replace the hard drive.

    8. If there is a problem with the hard disk data cable, replace the data cable.

    9. If there is a problem with the operation, check the operation.

  15. Anonymous users2024-01-22

    You must have any of the compression and decompression software installed on your computer, such as Winrar, 7-Zip, or Haopress, in order to open the compressed file. After installing the above software, you can directly double-click the RAR file to open the compressed file. If you have installed the compression and decompression software, and after double-clicking the RAR file, it prompts that there is no file format association, please click Browse, specify the path of the compression and decompression software program, check "Always open files with this program", and then double-click the RAR file to open it.

    If the specified file association still does not open the front, Wu Hongsheng, please reinstall the compression and decompression software.

  16. Anonymous users2024-01-21

    Caused by corruption of certain files in the system;

    The easiest way to recover it is to reinstall both software, and that will be the solution.

Related questions
13 answers2024-02-09

2006 6/1 Update Enhanced Automatic Installation Version Verification-free Version。 >>>More

12 answers2024-02-09

Haha, I can tell you exactly that you are poisoned. Format the C drive to reinstall the system, and remember not to double-click to open the D, E, and F drives after installation. Enter it in Runtime, then click on the computer configuration on the left side of the management template, click "System", find "Turn off automatic**" on the right side, select "All Drives" in the drop-down box, and select "Enabled" to exit after completion. >>>More

8 answers2024-02-09

Back to the fifth floor: Microdot does not rely on the signature code to kill the virus, but relies on the actions of the program to determine whether it is a virus technique, so there is also a certain false positive. >>>More

10 answers2024-02-09

Most of the cases in this case are due to problems with this file, and the landlord can try it by following the steps below: >>>More

10 answers2024-02-09

IE is unable to open secondary links.

The IE New Window module is corrupted, and several dynamic link files need to be re-registered. >>>More