-
It is normal for the refrigerator to heat up on both sides, because the condenser of the refrigerator is designed to be installed in the shell on both sides of the refrigerator, and when the compressor is working, it dissipates heat through the shell on both sides, and it is summer and the ambient temperature is very high, so the heat is very large.
If the compressor works for a long time, or does not stop working all the time, you should lower the gear of the thermostat to 1-2 in summer.
If the compressor is adjusted to 1-2 gears and does not stop, it depends on the refrigeration effect of the refrigerator, if the refrigeration effect is good, it means that the thermostat is faulty and the thermostat should be overhauled or replaced.
When the refrigerator is running, the high-temperature refrigerant gas discharged by the compressor dissipates heat through the condensers on both sides of the box, which makes the side plate a little hot and hot, and the higher the ambient temperature, the higher the temperature of the side plate, sometimes it may rise to more than 60.
The solution to the heat outside the refrigerator.
1. The refrigerator should not be too close to the wall.
Because the two sides of the refrigerator are heated, the refrigerator can not be placed too close to the wall, nor can it cover things on both sides of the refrigerator, which will hinder the heat dissipation on both sides of the refrigerator and increase the temperature, so that there is enough space on both sides of the refrigerator to dissipate heat, so as to effectively alleviate the heating of the refrigerator.
2. Don't open the refrigerator too often.
When using the refrigerator, do not open the refrigerator too frequently, frequent opening will increase the temperature in the refrigerator and increase the workload of the refrigerator, and the refrigerator will make the temperature on both sides higher if it is in operation for a long time.
3. Don't stop the refrigerator once it's in use.
Once the refrigerator is in use, do not stop it, because once it is out of use, especially in summer, when the temperature is very high, it will take a long time for the refrigerator to reach the set refrigeration temperature, and the temperature on both sides will increase after a long time of operation.
-
It's normal. The flat-back refrigerator condenser is on both sides of the refrigerator, and the condenser dissipates heat when the compressor is working, so it is very hot on both sides, especially in the summer (or the refrigerator that has just been used), and the temperature of the plates on both sides may be high.
Left and right, this is normal. There is an anti-condensation tube around the door frame of the freezer, which prevents external moisture from leaking on the door edge. As a result, the freezer door will also be a little hot when it is open.
-
1. The refrigerator absorbs the heat of food.
In order to lower the temperature of the food, there must be a low temperature source with a lower temperature than him, and with this low temperature source, the heat of the food will automatically transfer to the low temperature source, and its own temperature will be reduced. There is a refrigerator and a freezer in the refrigerator, and the evaporator coil for manufacturing a cryogenic source is buried in the back plate of the refrigerator room, and the refrigerant flows in the coil, and the refrigerant flows through the evaporator coil to vaporize, absorbing a large amount of heat, so that the temperature of the inner wall of the refrigerator in contact with the evaporator coil is reduced, and the corresponding inner wall of the refrigerator will absorb the heat of the food and reduce its temperature.
2. Transfer of absorbed heat.
The refrigerant that has been vaporized through the evaporator coil carries the heat absorbed from the food, and only by transferring the heat to the outside of the refrigerator can it be refrigerated and refrigerated, and the refrigerator uses copper pipes to transfer these gasified refrigerants to the outside of the freezer insulation layer, and then compressed by the compressor and transferred to the condenser on the outer wall of the refrigerator to complete the heat transfer.
3. The release of heat.
The heat transferred by the compressor is gathered in the refrigerant in the condenser, and the heat must be higher than the natural environment to quickly dissipate the heat, and the only way is to increase the pressure and temperature, and the compressor plays this role, compressing the gasified refrigerant, increasing the pressure and increasing the temperature, so that the temperature of the heat transfer condenser is higher than the ambient temperature, and the condenser releases heat to the air, and the refrigerant is also liquefied for recycling. The heat emitted by the condenser is absorbed from the food, and some condensers are used for internal testing on the outer panel of the refrigerator, and the outer wall of the refrigerator is the radiator.
The interior space of the refrigerator is the refrigeration zone, which absorbs heat. The outside is a condensation zone, which releases heat. The refrigerator has to release heat through the exterior surface, so it heats up.
Second, the refrigerator heating method.
1. Because the two sides of the refrigerator are heated, the refrigerator can not be placed close to the wall, nor can it cover things on both sides of the refrigerator, which will hinder the heat dissipation on both sides of the refrigerator and increase the temperature, so the two sides of the refrigerator should be kept with enough space for heat dissipation.
2. When using the refrigerator, do not open it too frequently, frequent opening will increase the temperature in the refrigerator and increase the workload of the refrigerator, and the refrigerator will make the temperature on both sides higher if it is in operation for a long time.
3. Once the refrigerator is used, it is best not to stop using it, because once it is out of use, especially in summer, when the temperature is very high, it will take a long time for the refrigerator to reach the set refrigeration temperature, and the temperature on both sides will increase after a long time of operation.
4. The items stored in the refrigerator should be kept in a certain number, not too little, because the temperature of the items stored in the refrigerator will be very low, and the temperature will not rise rapidly even in the state of short-term power failure, so that the refrigerator will quickly reach the set temperature in a short time after power-on, so as to avoid the temperature on both sides of the long-term operation.
-
Normal. You have cleaned up and turned on, the refrigerator is cooling rapidly, the condenser pipes of your refrigerator should be on both sides, and the hot is the heat generated by the refrigerator when it is cooling.
-
1. Caused by compressor operation. Cooling pipes are arranged on both sides of the refrigerator, and when the compressor starts working, heat is generated, and this heat needs to be circulated through the cooling pipes to the outer wall. According to the law of conservation of energy, the cooling capacity of a refrigerator is the same as the amount of heat that needs to be dissipated, so it will cause heat after a long period of use.
It can be seen that it is normal for the side of the refrigerator to be hot. 2. Frequent opening and closing of the refrigerator causes the temperature to rise. Opening the refrigerator frequently increases the energy consumption of the refrigerator, and the high-load operation of the compressor increases the heat, which leads to an increase in temperature.
Therefore, it is recommended that you first consider the items that need to be taken and put away, and try not to turn the switch on and off. 3. Poor ventilation can also cause the refrigerator to be hot. It is better to place the refrigerator in an open area, so that the refrigerator has enough space to dissipate heat.
In order to avoid dust, some people will cover the top of the refrigerator with a cloth, which will affect the ventilation conditions, so that the refrigerator has no space to dissipate heat, so that not only the temperature on both sides will rise, but the refrigerator may also burn out in the long run. Solution: 1. Do not place it near the wall, let alone cover things, and try to reserve space on both sides of the refrigerator to let it dissipate heat.
2. In the process of use, try not to open the refrigerator frequently, which will increase the workload of the refrigerator, and the high-load operation will make the temperature on both sides higher. 3. After the refrigerator is put into use, it should not be easily stopped, because it takes a long time to reach the preset refrigeration temperature, and the compressor generates more heat after running for a long time, and the temperature on both sides is higher. Is it dangerous for the refrigerator to heat and burn the hand, and it is not dangerous for the refrigerator to heat and burn the hand.
It is normal for the refrigerator to dissipate heat through the condensers on both sides when it is refrigerated. When the refrigerator is running, the condenser dissipates heat outward, so the refrigerator box will heat up. Especially in summer, the ambient temperature is relatively high, and the surface temperature of the box also increases accordingly, sometimes it may rise to more than 60 degrees, and it is normal not to exceed 85 degrees.
Once the refrigerator is running smoothly, the heat will slowly subside.
-
The main reason for the heating on both sides of the refrigerator is that most of the heat dissipation pipes of the refrigerator are located on both sides of the refrigerator, when the compressor is working, the heat will circulate through these pipes, according to the law of conservation of energy, how much heat is dissipated by the refrigerator, how much cold energy will be generated, so the refrigerator is used for a long time, especially in the summer when it is hot, the temperature on both sides will be very high or even hot. Therefore, it is normal for the sides of the refrigerator to be hot or hot.
-
Pipe heat dissipation Normally, the heat dissipation pipes of the refrigerator are on both sides of the refrigerator, and when the compressor is working, the heat will circulate through the pipes. This causes the refrigerator to produce cold air. 2.
Poor ventilation If the ventilation is poor, it will also cause the refrigerator to heat up, and the two sides of the refrigerator are close to the wall or covered by some items, resulting in the heat generated by the heat pipe can not be dissipated in time. 3.Long running time of the refrigerator The refrigerator is turned on for a long time, or the switch is too frequent, which will lead to the loss of cold air inside the refrigerator, increase the burden of operation, and gradually increase the temperature of the refrigerator.
Normal. Summers will be even hotter.
-
1. Compressor operation. The heat on both sides of the refrigerator is caused by the compressor inside the refrigerator in operation, the compressor will produce heat when it works, and then enter the pipe, how much heat dissipates in the refrigerator, how much cold energy will be generated, especially in summer, the internal temperature of the refrigerator produces too much cold air, so there will be a phenomenon of heat and hot hands on both sides of the refrigerator.
2. Turn on frequently. The refrigerator is frequently opened in the process of operation, so that the internal temperature rises, and the workload of the refrigerator is increased.
3. Frequent deactivation. The refrigerator is frequently deactivated and then opened, which will also cause the heating on both sides of the refrigerator, so once the refrigerator is opened, the last is not to be deactivated, especially in the high temperature environment in summer, if the refrigerator is deactivated, the ice cavity or box needs to be increased again in order to achieve the effect of refrigeration, and the running time is also increasing, and the phenomenon of hot and hot fever occurs.
4. There are too many things stored inside the refrigerator. In order to avoid the long-term operation of the refrigerator, it is necessary to reduce the items and keep them in a stable quantity, which can alleviate the phenomenon of refrigerator heating.
-
Causes of heat and hot hands on both sides of the refrigerator: caused by compressor operation, frequent opening and closing of the refrigerator resulting in high temperature, and poor ventilation will also cause the refrigerator to be hot.
1. Caused by compressor operation.
2. Frequent opening and closing of the refrigerator causes the temperature to become high.
Opening the refrigerator frequently increases the energy consumption of the refrigerator, so the compressor runs at a high load, which leads to an increase in temperature. Therefore, before opening and closing the refrigerator, you should consider the items that need to be handled, and try not to turn the switch on and off frequently. This increases the workload of the refrigerator, and high-load operation will lead to higher temperatures on both sides.
3. Poor ventilation can also cause the refrigerator to be hot.
It is recommended to place the refrigerator in an open area, and there must be enough space on both sides of the refrigerator to dissipate heat. In order to avoid dust, some friends will cover the top of the refrigerator with a cloth, which will affect the ventilation conditions, so that the refrigerator has no space to dissipate heat, so that not only the temperature on the side of the refrigerator will rise, but the refrigerator will also burn out after a long time.
How the refrigerator works
After plugging in the power cord of the refrigerator, the compressor starts to work when the contacts of the thermostat are turned on, and the low-temperature and low-pressure refrigerant is sucked in by the compressor, and is compressed into high-temperature and high-pressure superheated gas in the compressor cylinder and discharged into the condenser.
The high-temperature and high-pressure refrigerant gas dissipates heat through the condenser, and the temperature continues to drop, and is gradually cooled into saturated vapor at room temperature and high pressure, and further cools the circle void into a saturated liquid, and the temperature does not drop again, and the temperature at this time is called the condensation temperature. The pressure of the refrigerant is almost constant throughout the condensation process. The refrigerant saturated liquid modified by condensation and cavity inspection cavity is filtered out by the drier filter and then flows into the capillary, through which the throttling and depressurization are carried out, and the refrigerant becomes wet vapor at room temperature and low pressure.
-
Normally, the heat generated by the refrigerator is conducted to the outer wall.
-
Normal It's hot in summer, just turn on the air conditioner.
Cleaning method: Light can be gently scrubbed with a dry cloth, and serious can be diluted with general detergent and wiped with a cloth. The condenser on the back of the refrigerator is prone to dust accumulation and affects heat dissipation, so it should be cleaned with a duster or vacuum cleaner at least once every six months. >>>More
Your router should not limit the speed of 4M, the bandwidth is enough for two people. >>>More
Haier, Siemens, Xinfei, Meiling these brands are not bad, freezing force is an important technical indicator to measure refrigeration appliances. But refrigeration appliances are used for different purposes. Compared with special needs such as commercial use and scientific research, the main technical performance of household refrigerators should not be refrigeration, but preservation. >>>More
OK! Put it in the refrigerator, put the pointed side up, generally put it between January and February, but it is best to eat it as soon as possible, it is not so delicious after a long time, and the nutritional value is gone. >>>More
The refrigerator should be powered off if it is not used for a long time. >>>More