Protect the racket frame with tape, how to protect the rubber surface of the table tennis racket wit

What you mean is that you are afraid of the accident caused by the collision of the racket, especially when the racket is rubbing the floor. There are many kinds of electrical insulating tape, depending on which one you use, but it is best not to use electrical tape, corrosion of the frame is secondary, the main thing is that I don't know if it will have an impact on the line, and there is no problem with medical tape.

As for the change of balance point, I personally think that it is the most important thing for you, because you should play relatively few times, and you are not a professional, so the impact is not great!

These are generally not recommended, after all, the balance point has been changed. The balance point of the bow 10 seems to be 290, which is not a backward beat, and with the weight of the glue, it is estimated that it will increase a little.

To protect the frame, if you must want to apply tape, then you can use medical tape. Actually, there is no problem with electrical glue, I used to use this.

I remember someone saying before that you could remove the varnish.

It's good that the racket can be used, and it's not gold, you don't have to collect it, and the number of times you play the ball is not very much, any consumables have his lifespan, and the racket is also, replace it if it's broken, and the necessary maintenance is still required, but you don't need to be as careful as you, personal opinion.

In another way, it is estimated that you are a peculiar idea and a maverick person, in fact, you can put it directly on the racket, the general racket is carbon, as long as you put it in a dry place in the case, there will be no problem. point of view, you will be more relaxed and happy.

If the doubles are bumping, you can't protect the racket with adhesive tape.

So unless you want to make the head a little heavier, but if you want to make the head a little heavier, you should attach a special weight strip.

In other cases, there is no need to apply adhesive tape, which will affect the feel and performance of the racket.

The protection of the racket is, of course, based on use. The last reason why the racket cannot be used is often a broken rod or a broken frame. If you really want to take care of it and use it infrequently, then it is recommended that you cut off the string after each play, because tens of pounds of line to the frame will damage the strength of the racket.

But this is too exaggerated, just like having a habit of cleanliness, which belongs to a mental disorder. Professional players don't usually take it seriously during training.

It's good to be able to exercise regularly, and people can get injured when they play, let alone rackets. For people who play a lot, it is normal to lose one or two rackets a year, and the cost is not much.

Fainted, I've heard of oiling, but I haven't heard of anything like you, and the glue will definitely be sticky by then.

It is estimated that you are a peculiar idea, maverick person, in fact, you can put it directly on the racket, the general racket is carbon, as long as you put it in the sleeve in a relatively dry place, there will be no problem.

No, the tape will stick to it, clean the rubber surface with table tennis cleaner after each game, and then paste it with a special protective film, if you don't have plastic wrap, or a plastic pad for primary school students, but you need to cut out the shape of the racket with scissors, I hope it will help you... The side is answering clearly. Yun Hui.

It is possible to make the racket head a little heavier, but most of the amateur feelings are not visible, and it may also lead to an imbalance in the racket surface, affecting the ball control, if it is not Lin Dan or don't stick it, the racket will be ugly after a period of time, and it will be even more ugly to tear off the tape. If you want to pay attention to your head, you should buy an offensive shot.

The head is heavy, the balance point is forward, and the smash will be accelerated. But you have to know how to exert your strength to feel it.

I wrap the tape to protect the racket, especially in the outdoor court and doubles, to prevent the racket from abrasion, collision, **, generally wrapped with insulating tape, the color can be selected, you can also use medical tape. As for changing the characteristics of the racket, I don't feel anything... The slight change in the balance point you mentioned can only be felt by a master, and the average person is not so sensitive.

So if you want to protect the racket, don't worry! Hehe.

On the one hand, it can make the balance point forward and increase the strength of the kill, and on the other hand, it can protect the frame of the racket so that it does not hurt the racket so much when picking up the ball. I wrapped it in front of my beat.

1. You can change the balance point to make the balance point forward and increase the strength of the kill, but the head weight requires a certain amount of wrist explosiveness.

2. Protect the racket frame, so that the racket is not so hurt when picking up the ball.

It will change the balance point, but if the level is not high, it should not be felt.

I don't think it has to be this way.

First, it will affect the aesthetics of the racket;

Second, the real protection effect is not great;

Three, let people feel stingy when they see it.

1. Computer hardware products; Computer case shell, computer paint board, plastic injection molding, galvanized sheet stamping, printing and painting parts surface protection;

2. Liquid crystal photoelectric series; LCD liquid crystal display, conductive membrane switch, touch screen, backlight plate, EL electrolyzing light sheet, surface protection of color computer monitor;

3. Plastic injection molded products; ABS, PP injection molded products, PVC sheets, acrylic sheets, dashboards, plastic lenses. Products are widely used in plastic products, hardware processing, decorative plates, electronic appliances and other industry products, such as: plastic lenses, glass lenses, plastic injection molded parts, nameplate production, liquid crystal displays, copper sheets, aluminum sheets, stainless steel plates, cold rolled plates, circuit boards, speaker boards, PC boards, titanium plates and other advanced materials surface protection, to protect your products from surface damage and scratching during transportation or production and use.

No, the badminton racket is mainly hit on the side of the net racket, and the border is not very important, please adopt.

The color space of digital photography can be calibrated with extreme precision for very accurate color reproduction. Commercial photography is generally digital; Slight changes in the temperature of the film, the processing temperature, the concentration of the pharmaceutical industry, can all lead to different results that cannot be precisely controlled.

**How do you wash it out on tape? Go to the photo studio to wash.

It would be nice to deal with it with potoshop software.

Haha, that is ordinary electrical tape or medical tape (Lindane), mainly used to aggravate the head, some people like to stick it on the head of the racket to prevent it from hanging when picking up the ball. As for the official ones, they are specially used to aggravate the head, so you can search for the head sticker on taobao.

Head-end ??? It's a handle there. If it is the handle there, it is called hand glue, the official has **,**10 yuan, if it is at the end of the racket with half a circle of tape, that is an ordinary insulating glue, hardware stores have to buy, it is just to prevent the paint of the head from being scraped off, in fact, it has no effect,

It's simple: sealing glue. The answer upstairs I can only say: Amitabha,