Which province is a gas heat transfer oil boiler or a coal fired steam boiler

Compared with coal-fired steam boilers, coal-fired boilers are more cost-effective.

Gas Thermal Oil Boilers:

Gas heat transfer oil boilers are made with heavy oil. Light oil or flammable liquid is fuel. Heat transfer oil is the heat carrier.

The circulating oil pump is used to force the liquid phase circulation. Heat energy is delivered to the heat-using equipment. This is followed by a return to the reheated through-flow special industrial furnace.

Widely used in petrochemicals, e.g. Textile. Dyeing.

Plastics. Rubber. Food processing.

Wood processing. Asphalt heating. Carton production.

Vegetables are dehydrated. Baking lacquer. Casting sand mold drying, etc., can also be used for 350OC baking, steaming, shaping, melting, drying.

The gas heat conduction oil furnace is an assembled forced circulation vertical oil (gas) boiler. The heating surface of this series of boilers is compact, the heating surface is composed of inner and outer densely discharged discs, the inner coil is the radiant heating surface, and the outer surface of the outer coil and the inner coil constitutes the convection heating surface. The boiler is composed of an upper body and a lower combustion chamber, which is combined on the construction site.

After the combustion is fully burned in the combustion chamber, after the radiation heating surface absorbs most of the heat, the high-temperature flue gas enters the convection heating surface for heat exchange, and the air required for boiler combustion is heated in the air preheater after leaving the boiler, and then the flue gas is sent to the chimney and discharged into the atmosphere by the induced draft fan through the dust collector.

Coal-fired steam boilers:

Coal-fired steam boiler refers to the fuel burning coal, after the coal heat is converted, it produces steam but not all the heat is effectively converted, and there is a part of the non-work consumption, so there is a problem of efficiency, and the efficiency of the general large boiler is higher, between 60-80%.

If the applicability factor is excluded, in terms of fuel** and operating costs alone, of course, coal-fired boilers save more money.

In addition, the heat transfer oil can have both gas fuel and coal-fired fuel, and the use of heat transfer oil boiler is related to the downstream required process, because the heat transfer oil boiler can have a relatively high temperature, there will not be a lot of pressure, and the temperature can also maintain a considerable degree of stability, which is very suitable for printing and dyeing, fine chemical and other industries.

Hello, heat conduction oil furnace is a kind of liquid phase furnace, with heat conduction oil as the carrier, with the characteristics of low pressure and high temperature. Steam boilers use water as the medium to produce steam. Compared to the high temperature and low pressure of the heat transfer oil furnace, he needs to achieve a higher pressure.

The hot water boiler is a device that simply provides hot water and does not need to be inspected.

The key is that the use is different, the steam boiler produces high-temperature and high-pressure gas, which is used for power generation, printing and dyeing, medical treatment, etc., because it produces steam, so it is a pressure vessel, and the use and installation must comply with the relevant regulations. A hot water boiler produces hot water and is not a pressurized vessel.

The heat conduction oil furnace is to directly insert the electric heater into the organic carrier (heat transfer oil) for direct heating, and through the liquid phase circulation of the high-temperature oil pump, the heated heat conduction oil is transported to the heating equipment, and then returned to the electric heating oil furnace by the oil outlet of the heating equipment to form a complete circulating heating system. The electric heating heat conduction oil furnace adopts a digital temperature controller to control the temperature, and has the functions of over-temperature alarm, low-oil level alarm and over-pressure alarm.

The heat conduction oil furnace is also called the organic heat carrier furnace, commonly known as the heat conduction oil boiler, and the official name is the hot oil furnace. It is a new type of thermal energy equipment with coal, oil and gas as fuel, heat conduction oil as circulating medium for heating, heat conduction oil furnace refers to a new type of thermal energy conversion equipment with heat carrying working fluid for high temperature heat conduction oil (also known as hot coal body, heat carrier), usually also uses "MW" (megawatts) to indicate the capacity of the furnace, the old unit also uses "10,000 kilowatt hours" or "10,000 kcal hours", that is, "104kcal h" indicates that the advantage of heat conduction oil furnace is "high temperature and low pressure", stable operation and is widely used.

In the use of industry, heat conduction oil furnace is mainly used for the heating of natural gas and the processing, storage and transportation of mineral oil. Refineries use heat transfer oil to preheat cold materials and have been successfully used to heat solvent and extractant evaporation units in lubricant manufacturing. Due to the advantages of uniform heating, simple operation, safety and environmental protection, energy saving, high temperature control accuracy and low operating pressure compared with the use of heat transfer oil heating and steam heating, it has been widely used as a heat transfer medium in modern industrial production.

Industrial boiler It refers to steam boiler, hot water boiler, heat conduction oil furnace, steam and water dual-purpose boiler, originally people gave it such a name, mainly according to the difference in the physical characteristics of the medium they rely on in the process of completing the energy transfer respectively, named steam boiler, hot water boiler, heat conduction oil furnace and steam-water dual-purpose boiler.

In the process of operation, the steam boiler first completes the endothermic process (radiation, convection and conduction), turns the water into water vapor and stores energy, and then completes the exothermic process, transports the energy of high-temperature water vapor to the heating equipment, and at the same time completes the change of the physical characteristics of the province, there is a high-temperature water vapor into low-temperature water vapor, high-temperature water, low-temperature water, etc. To achieve the purpose of people's production and work life.

The full name of the heat conduction oil furnace is because it should be the heat conduction oil boiler (steam, hot water, heat transfer oil three heat transfer media) is to rely on the heat transfer oil (organic heat carrier) as the medium, absorb heat (energy), release heat or transfer heat (energy), so it is named as the heat conduction oil furnace, and some people call the organic heat carrier heat conduction oil furnace, heat carrier furnace, organic heat carrier furnace, in fact, the full name should be the organic heat carrier heat transfer oil boiler. With the gradual development of industry and agriculture, boiler differentiation is becoming more and more systematic, as far as the heat conduction oil furnace is concerned, people are divided into many types according to the combustion mode, energy source, oil coil structure and other related parameters, Yongxing Boiler Group designs, develops and manufactures heat conduction oil furnaces are mainly liquid phase furnaces, such as: YGL

yllylw

yqlyqw

YDLYDW and other specifications and models to meet the needs of consumers for boiler equipment procurement.

Heat transfer oil furnace is a liquid phase furnace with heat transfer oil as the carrier, which has the characteristics of low pressure and high temperature. Steam boilers use water as the medium to produce steam. Compared to the high temperature and low pressure of the heat transfer oil furnace, he needs to achieve a higher pressure.

The hot water boiler is a device that simply provides hot water and does not need to be inspected.

Compared with coal-fired dust cultivation boilers, gas mold temperature machine boilers are more energy-saving and environmentally friendly, and the use cost is also lower.

The fuel of the gas mold temperature machine boiler is natural gas, which has high combustion efficiency and high thermal efficiency, and will not produce a large number of harmful gases such as smoke and carbon dioxide, and has little pollution to the environment.

The Shoulu coal-fired boiler needs to use coal as fuel, which has low combustion efficiency and low thermal efficiency, and will produce a large amount of harmful gases such as soot and carbon dioxide, which is polluting to the environment.

Therefore, in the long run, the gas mold temperature machine boiler is more cost-effective.

The cost comparison between gas boilers and coal-fired boilers is, of course, the low cost of coal-fired boilers. In terms of fuel costs, the cost of gas is about 100% higher than that of coal, but due to the complexity of the configuration and operation of the coal-fired boiler, the actual cost is as follows, and the empty gas boiler is only about 40% higher than that of the coal-fired boiler.

If you want to talk about the cost, it is still the lowest cost of coal-fired boilers. However, the large area and high pollution are the disadvantages of coal-fired boilers. And the local environmental protection department will often look for trouble. With all these factors in mind, it may be better to use natural gas to save trouble.

Hello, I'm glad to answer your questions, using the steam of the thermal power plant for heating has a lower cost than using a natural gas heat transfer oil furnace, so it will save more money. The use of steam heating from thermal power plants allows for the use of waste heat, which saves fuel costs and reduces emissions of pollutants such as carbon dioxide. In addition, the construction and maintenance costs of gas pipelines need to be considered when using natural gas heat transfer oil furnaces.

Of course, the choice of specific spring cover also needs to consider your actual situation, such as heating amount, heating time, fuel**, etc. It is recommended that you consider the actual situation comprehensively.

Summary. Hello dear. It depends on the application of steam and natural gas from the thermal power plant in the heat transfer oil furnace <>

1) If the steam in the thermal power plant is low and the transmission distance is not too far, it is more economical to use steam to heat the heat transfer oil furnace as a whole (2) But if the investment and maintenance cost of the steam system is too high, the actual cost of use may be higher than that of natural gas. Although the natural gas ** is high, the system is simple, the input cost is low, and it also has a cost advantage.

Which saves money with steam and natural gas heat transfer oil furnaces of thermal power plants.

Hello dear. The stall depends on the application <> of steam and natural gas pants collapse in thermal power plants in heat transfer oil furnaces

1) If the steam in the thermal power plant is low and the transmission distance is not too far, it is more economical to use steam to heat the heat transfer oil furnace as a whole (2) But if the investment and maintenance cost of the steam system is too high, the actual cost of use may be higher than that of natural gas. Although the natural gas ** is high, the system is simple, the input cost is low, and it also has a cost advantage.

Steam and natural gas heat transfer oil for thermal power plants have their own advantages and disadvantages:1Steam:

Advantages: The steam of the thermal power plant is a low-cost heat source, ** is cheap, and the use of steam can reduce the operating cost of the heat transfer oil furnace. Disadvantages of Eggplant Socks Sun:

The steam system is relatively complex, requiring supporting pipes, vibrato valves, steam drums and other equipment, and the investment and maintenance costs are high. Especially when the transmission distance is long, there will be a large heat loss in good sales. 2.

Natural Gas: Advantages: Direct combustion of natural gas produces high-temperature gas to heat the heat transfer oil, simple system, and low capitalize costs and maintenance costs.

Disadvantages: natural gas ** is higher, and the operating cost is also higher, especially in the case of natural gas, the cost rise is more obvious.

These three are mainly different in terms of working principles, products, and uses.

1. The heat conduction oil furnace uses the heat conduction oil as the circulating medium, heats the heat conduction oil by energy consumption, and transports the heated heat conduction oil to the heating equipment through the high-temperature oil pump, and then returns to the oil furnace from the oil outlet of the heating equipment, so as to form a heating system back and forth;

The hot water boiler uses hot water as the circulating medium, and the specific working principle is similar to that of the oil furnace;

The steam boiler uses electricity, oil and gas as the energy source, and uses a heating rod or burner to heat water into steam, and then the steam is transmitted to the heating equipment through the pipeline.

Electric steam boilers.

2. After the heat conduction oil furnace works, the heat conduction oil is produced, and the product of the hot water boiler is hot water, and correspondingly, the steam is produced after the operation of the steam boiler.

3. Heat conduction oil furnaces are mostly used in industrial production, such as refinery preheating of cold materials, mineral oil processing, etc.;

Hot water boilers are mainly used for heating and bathing;

Different from the monotony of the above two heating equipment in terms of function, steam boiler steam heating is suitable for all walks of life, concrete curing, food processing, garment ironing, medical disinfection, dehydration and drying, biopharmaceutical, experimental research, chemical plant equipment supporting, etc., the use of steam boiler can cover almost all heat industries, only you can't think of it, you can't do it without it.

Gas steam boilers.

Of course, everyone will have their own opinion on the choice of heating equipment, but no matter how we choose, we must take safety into account. For example, heat transfer oil has a much higher boiling point and a correspondingly higher temperature compared to water, making it even more dangerous.

The advantages of heat conduction oil boiler are mainly reflected in safety, environmental protection and high heat conversion efficiency. Although the cost of use will be relatively high, in addition to the early assembly and pipeline laying costs, the indirect cost of gas boilers is much higher than that of thermal conduction oil boilers.

Specifically, there are the following points:

1. The heat conduction oil boiler has the characteristics of low pressure, high temperature, safety, high efficiency and energy saving.

2. The heat conduction oil boiler has a complete operation control and safety monitoring device, which can accurately control the working temperature.

3. The structure of the heat conduction oil boiler is reasonable, complete, the installation period is short, the operation and maintenance are convenient, and the boiler layout is convenient.