Badminton racket and string problem, what are the methods of badminton racket stringing?

Hello! First of all, for the beat of victory, I know better, Thunder series sorry I haven't heard of 1111, just to compare with the 1131 and 1130 I know, this kind of beat is carbon fiber, suitable for novice entry stage, and the Thunder series now seems to be used less, as far as I know, the material of carbon fiber is not able to withstand the 26 pounds that the landlord said. I'm more curious about why the landlord wants to tie a 26-pound line, the average amateur player 22 to 24 is enough, not more than 25, the pound 26-pound line is a more professional player, and the racket must be more than 1000 to withstand the impact of the ball.

So, if the landlord is a master and can adapt to the feeling of 26 pounds, then my suggestion is to change to a racket, but I know of fewer common high-tension rackets, and it is not convenient to suggest here, the landlord can take a look online. If the landlord's skill is not very high, it is recommended that 20 to 22 pounds is enough. Because I haven't seen more than 26 pounds around me at the moment, a friend of mine is on the second line team, tied to 25 pounds, and changes the line once a week, which is very powerful.

In addition, for YY's beats, I usually don't pay much attention to them because I am very resistant to Japanese products, but since I am talking about 15 to 20 pounds, then it should not exceed 22 pounds at most, otherwise the beats will definitely break if I play too much.

For YY, I only pay attention to its line, BG65 is a classic line, which is durable, but the elasticity is average. 80 elasticity is a little better, belongs to the offensive feather line, these two lines are honestly not distinctive, my recommendation is 66 or 95, but it still depends on personal preference, for example, if the landlord really wants to pound more than 24 pounds, or 65 is more sturdy. If you buy it in a specialty store, 65 is generally more than 30, 80 may be close to 40, 66 is 45, 95 is 50, and there is a new line 98 that I saw last time, 70 fast, too expensive to buy, if the landlord is interested, you can try.

It's all after 7% off**).

As for where to buy, Yougo.com is a good choice, but I don't know that the price package above does not include postage, and it is not cost-effective if it is not included, I usually buy it in a specialty store, and then they have a better attitude towards tying the line, otherwise they will be cold-eyed when they take a line to tie it, which makes people very unhappy.

These two rackets can't pull such a number of pounds, all of them are less than 22 pounds. **It's hard to say that the line is better, and there are more shops to go to Wutaishan Stadium to pull the line, which is relatively cheap.

It is not recommended to pull yy's so high. This is the old CB series. Generally, it can't withstand the current medium and high tensions. My cb8000 can only top up to 22. Advise LZ not to take this risk.

The other victories were not used, it is not clear.

Pull the thread is still in the place where you buy the thread, personal habit. It's convenient and you can't pull it well, you can settle accounts with him.

Good luck..

It is recommended that LZ change the shot, and how did you think of buying it in such an expensive place? Even if you want to shop online, it's much cheaper than you. 65 is more durable, 80 is very elastic, and 65 is cheaper than 80.

1 Inspection.

New Auctions; Check whether the surface of the racket is intact, whether the accessories are complete or whether there are any quality hazards.

Old Shots; It is necessary to check whether the rubber particles of the line guard are defective and whether the frame is cracked.

fixed scale; See if the pounds required by the customer exceed the pounds guaranteed by the manufacturer on the label.

thread trimming; For broken rackets, please cut the thread opposite the broken string to ensure that the racket is restored to its original shape first, and then cut it first.

Vertical 1, horizontal 11, vertical 1, horizontal 12, need to be crossed at the same time), and finally cut in turn: vertical 2, Wu Zai Jing horizontal 10, vertical 2, horizontal 13, vertical 3 ......

2 rackets.

Fasten the frame at 6 and 12 o'clock to the frame holder.

Place the four-point gripper against the wall of the frame. (It is appropriate to just attach the edge of the frame to avoid early deformation.) ）

Ensure that the four-point gripper, frame holder and the 6 points in contact with the frame are kept on the same horizontal plane.

Depending on the model, the frame is placed at 6 o'clock and 12 o'clock away from the struts, gongs or plastic gaskets.

Do not close to each other to avoid high tension to the frame, pillars, and gaskets squeezing each other, resulting in concave or paint peeling.

Adjust the tightness of the wire clamp, and use the wire of the same diameter and thickness of the wire to be pulled for preliminary testing.

Good required pounds.

3 Stringing and pulling threads.

The vertical line starts from the midpoint of the top frame of the racket, and passes through both sides in turn, and pulls the line evenly to both sides to ensure that the left and right sides of the racket are subjected to the same tension at the same time to achieve the same force. When piercing to the lower 9 holes, skip to the lower 12 holes.

Into (two holes in the middle interval), from the upper 11 through, and then from the upper 10 holes, from the lower 10 holes, the vertical line is finished.

The horizontal line is threaded from the lower 9 holes into the lower 5-6 (indefinite) holes, and the lower 10 holes begin to pull the line, (when the horizontal line is pulled to the fifth line, add 2 more pounds on the basis of the vertical line pounds, when the upper 11 holes are worn (the cavity is cautious), please reduce the pounds by 2 pounds, and restore the pounds of the vertical line), and finally jump to the upper 4-5-6 holes to tie the knot (uncertain).

4 Tie the knot.

When pulling the last thread to be knotted, add 10% to the number of vertical wire pounds to prevent knotting and losing pounds.

The vertical chord should be pierced through 1 hole on the paddle head, and the vertical chord should be worn and pulled symmetrically to both sides in turn. Rantan clamped the two middle lines with a thread at the top of the frame. The sail is then pounded and the string is pulled.

Fix the line that pulls the pound with another clamp and pull the other one as well, loosen the thread clamp in the middle and move it to the line that has just been pulled. After the second line is drawn, you can directly pull the next line. You can also re-weigh the first thread and adjust the thread clamp to the top of the frame to ensure that the left and right tensions are balanced.

When re-weighing, avoid pulling over your head because the thread is already taut.

There are many ways to pull the line in badminton, the most commonly used is the two-knot pull line method, only two knots are tied when the line is pulled, and the horizontal cover is the same in the whole world.

Be sure to measure the length of the line in advance with the neutron of the beat calendar, first pull the vertical string, and then pull the string from the midpoint of the beat head to both sides, so that you can ensure the elasticity of the pair, if you straighten a line to fix the limb and then pull the other one.

Hello, there are generally pull lines in two places. One is a shop that sells badminton rackets. The second is the badminton hall.

Now the ** of the pull line is 10-25 yuan. Different cities, different pull line levels** are also different, and some may be higher. There are two ways to pull the badminton racket, the one-line two-line head method and the two-line four-line head method.

There is no doubt that the second method is better, it is to pull the horizontal and vertical lines separately, and the weight retention and damage to the line holes are better. The normal pull line is generally on the vertical line first and then on the horizontal line, generally, below 24 pounds, the vertical line is 1 pound lower than the horizontal line, more than 25 pounds, the vertical line is 2 pounds lower than the horizontal line. This is because the vertical line is applied first, and then the horizontal line is equivalent to indirectly adding pounds to the vertical line, so in order to ensure the balance of the beat, the vertical line should be slightly lower, otherwise the high pound may cause the frame to deform after a long time.

Hello、Badminton racket string pulling method。 1. Pull the vertical string from the midpoint of the racket head to both sides to ensure that the left and right sides of the racket are deformed consistently, elastic and symmetrical.

Steps: The vertical chord should be pulled symmetrically to both sides from the midpoint of the beat head (through the upper 1 hole) or at the end, respectively. When the lower 9 holes are pierced, you must jump to the lower 12 holes and then penetrate (in the meantime, jump two line holes), penetrate in the upper 11 holes, then penetrate from the upper 10 holes, penetrate from the lower 10 holes, jump back to the lower 8 holes and enter the knot, and finish.

Special note: the vertical 10 strings are the last vertical strings to be played, not the vertical 11 strings.

Summary. 1.Badminton racket string pulling refers to tightening the string cord on the racket surface to improve the elasticity of the racket, the sense of impact and increase the strength of the ball, but due to the material and other reasons, the badminton racket will also relax quickly after pulling the string, so in order to achieve good results, you need to regularly pull the string of the racket.

2.When pulling the string, if it is pulled too tightly, it will cause the elasticity of the racket to be too large, which will affect the landing point of the ball; And if it is pulled too loosely, it will affect the strength of the blow. Therefore, when the badminton racket is pulled tight, it should be tight enough, but not too tight, to ensure the good effect of the racket.

3.After the badminton racket is pulled up, it can generally last for 3-4 weeks, during which time it may be affected by external factors, such as sweat, temperature, etc., which will make the racket slack, so that regular string maintenance is required. Also, generally this kind of is pulled by a machine, and the manual pull will definitely be loose!

1.Badminton racket string pulling refers to tightening the string cord on the racket surface to improve the elasticity of the racket, the sense of impact and increase the strength of the ball, but due to the material and other reasons, the badminton racket will also relax quickly after pulling the string, so in order to achieve good results, you need to regularly pull the string of the racket. 2.

When pulling the string, if it is pulled too tightly, it will cause the elasticity of the racket to be too large, which will affect the landing point of the ball; And if it is pulled too loosely, it will affect the strength of the blow. Therefore, when the badminton racket is pulled tight, it should be tight enough, but not too tight, to ensure the good effect of the racket. 3.

After the badminton racket is pulled up, it can generally last for 3-4 weeks, during which time it may be affected by external factors, such as sweat, temperature, etc., which will make the racket slack, so that regular string maintenance is required. Also, generally this kind of is pulled by a machine, and the manual pull will definitely be loose!

I wish you dreams come true and may you succeed; I wish you a bright future and may you be happy and healthy; I wish you all the best and may you be happy and carefree; I wish you good fortune like the East China Sea, and may you be safe and auspicious.

What is the reason for the fast pat off pounds.

Hello, dear, you didn't express it clearly, and there was no way to solve your problem.

I pulled 28 pounds and it felt like 26 pounds, and now it doesn't sound the same.

In this case, it may be due to a problem with the material of the badminton racket, which makes the tension force greater and the sound is different. It is recommended to disassemble the badminton racket and check the tightness of the cable to see if it is caused by the cable being too tight. If the cable is too tight, you can loosen it up a little or replace it with a new one.

In addition, you can also consider disassembling the badminton racket, baking it, and allowing the material to be restored before putting it back on to reduce the tension.