What is the role of hand glue for badminton rackets

The hand glue of the badminton racket works as follows:

1. Hand glue is rolled on the handle of the badminton racket, in order to prevent non-slip and increase the friction of the hand on the handle, there are two kinds of tied to the handle, one is the towel belt, the second is the hand glue, the towel belt is sweat-absorbent, the main hand sweats a lot, can be absorbed.

2. At the same time, it can protect the handle.

3. Increase comfort (because it's soft). Especially when exerting force, the paddle tied with glue has a strong sense of control, which will play a certain role in afterburner, and the landing point of the ball is more accurate.

Hand glue is rolled on the badminton racket handle, in order to prevent non-slip, increase the friction of the hand to the racket handle, there are two kinds of tied to the racket handle, one is the towel belt, the second is the hand glue, the towel belt is sweat-absorbent, the main thing is that your hand sweats a lot, can be absorbed, but you must change it regularly, otherwise the smell is unpleasant, but the hand glue is expensive, sweat-absorbing, and protects the handle.

In addition, the hand glue can also increase comfort (because it is soft). Especially when you are exerting force, the racket tied with glue will make you feel a strong sense of control, which will play a certain role in afterburner, and the landing point of the ball will be more accurate.

Yo 1. Non-slip

2。Sweat Wicking 3. Protects fingers and increases feel

4。Increase the weight of the club to make it easier to hit the ball

5。For women, there is also an aesthetic function (the color reflects the individuality).

Non-slip, sweat-absorbing, and increase the friction of the grip when hitting the ball, so as to achieve the best effect of various movements when hitting the ball.

Increase grip, sweat and slip resistance, better force, prevent palm abrasion, and prevent damage to the handle.

It is different from sweat absorption.

Increase grip, sweat and slip resistance, better force, prevent palm abrasion, and prevent damage to the handle.

It is mainly sweat-absorbing and non-slip, and also has the effect of adjusting the center of gravity of the racket.

Non-slip, easy to exert force, prevent the racket from falling off!

1. Anti-slip, exercise sweat a lot.

2 feel comfortable to hold.

Non-slip and sweat-wicking (you know it as soon as summer arrives).

Hold the handle with your left hand, press the glue on the handle with your left thumb, and wrap it around the wide edge of the glue.

Tighten the glue with your right hand, turn the handle with your left hand, and wrap the glue evenly around the handle, generally covering half the width of the previous circle, and wrap it evenly until the junction of the lever.

Tear off the glue with the narrow edge, fix the glue, and fix the end of the glue with edge banding strips along the winding direction of the glue.

Badminton hand glue, also known as shank leather or sweatband. For badminton players, it is more important, whether it is a professional or an amateur, should use a good tool - the main function is non-slip and sweat absorption. And it also has a good protective effect on the hand, and at the same time, it must be diligent in changing.

After all, you have to pay attention to personal hygiene.

Grip glue and towel grip cloth should not be used as a substitute for the outer grip glue. When the grip glue or towel grip cloth is used instead of the outer grip glue, due to the large weight of the grip glue and the towel grip cloth, the balance of the racket will be affected, making the whole racket heavier, the head of the racket will feel lighter, and the speed and power of the racket will be lost; When the grip glue is damaged or loses its basic performance, please replace the grip glue in time.

The adhesive steps of the badminton racket hand glue are as follows:

1. Open the hand glue and tear off the plastic film on the hand glue.

2. There are two ends of the hand glue, and the small head is generally used for finishing in the badminton racket. The edge of the big head of the hand glue is facing the bottom of the badminton racket, and the trembling shirt must be aligned, and the left and right hands are different, the left hand is from right to left, and the right hand is from left to right.

3. Wrap the bottom of the racket around the bottom of the racket with hand glue, and this circle should be wrapped vigorously, otherwise it will cause wrinkles or protrusions in the following winding. Try to wrap the first loop around the bottom of the clap tray and extend it a little outward. Hole round.

4. Slowly pull the hand glue down, this place is the most difficult to pull, easy to wrinkle, control the spacing, and then pull down. It is important to remember to stretch the hand glue first to deform it slightly, and then start wrapping it, so that it will not affect the feel and aesthetics.

5. There is a double-sided tape on the back side of the pull, which is used for fixing. If the glue is rectangular, use scissors to cut it into a triangle so that it can be finished.

The above is the glue method of badminton racket.

How to wrap the badminton racket with hand glue is as follows:

1. Tear off the film on the glue first and prepare to start.

2. The hand glue is divided up and down, and the end of the small strip-shaped Lutan is used for finishing above the handle. So wrap the other end around the bottom of the handle.

3. The side of the glue glue is flush with the bottom of the handle and begins to wrap, it should be noted here that the left hand is wrapped from right to left, and the right hand is wrapped from left to right.

4. Wrap the bottom of the handle with hand glue, this circle must be forced, otherwise it will be very easy to degum in the future.

5. Tighten the hand glue, slowly wrap it up, and control the spacing, generally it is advisable to cover half of the previous circle in each circle.

6. When wrapping to the top of the handle, there is a double-sided tape, tear off the adhesive, and tighten the mouth with double-sided tape after wrapping. The closure should be beautiful. If the glue is slightly longer, you can tighten it a little more and wrap it two more times before closing.

Badminton hand glue is a tool that acts on the badminton racket and is used for anti-slip and sweat absorption. And it also has a good protective effect on the hand, and at the same time, it must be diligent in changing.

After all, you have to pay attention to personal hygiene. The hand glue we often talk about is roughly divided into three categories: grip glue, outer grip glue, towel grip glue, and keel hand glue.

Generally, when I talk about hand glue, I mean the outer grip glue. When the grip glue is damaged or loses its basic performance, please replace the grip glue in time.

1. First prepare a sticky hand glue and sealing strip with film, tear off the surface of the reed and tremble protective film and contact it with the palm of your hand, and the other side of the hand glue is wrapped inside and contact with the handle, then tear off the double-sided tape at the top, and then stick the hand glue on the end of the handle and fix it, you can choose to pull it tight by hand appropriately, you only need to pull it to the surface of the glue out of Hongchang is slightly deformed, so that the rubber surface and the handle can be more fitted, and the displacement can be avoided to a certain extent.

2. In the process of pulling, you should use the thumb of the other hand to press, so that you can completely fix the rubber surface and prevent the phenomenon of rebound, pull a few times according to the previous method, and use scissors to cut an oblique mouth for the remaining part of the hand glue after wrapping, so that it will be more convenient when sealing.

3. Then take out the sealing strip prepared in advance, wrap it to the sealing part of the handle in turn according to the previous method, completely wrap and cover the seal, and then cut off the excess rubber strip with scissors, and finally press the glue several times by hand.