2G U disk, how to transform into a system installation disk without affecting the storage of other d

Yes, you think of the U disk as your computer hard disk, after the computer hard disk is installed with the system, the hard disk can also be used in the same way, the U disk is the same, but a microsystem is installed, and other spaces can be used the same, it's okay. Recovery, of course, is no problem.

OK. Taking Chinese cabbage as an example, after making it, a few hundred meters of hidden space will be created in the head of the U plate, and the PE system will be used as a starting plate.

The rest of the space can be used normally, and when you don't need it, run the cabbage again, and just return the space occupied.

No, it can only be made after formatting.

You can back up the contents of the USB flash drive to the computer in advance and then make it.

After making it, there is capacity to directly put the data you want to store, as long as you can put it.

Yes. No problem at all. But I recommend that you mass-produce CD ROMs that can be booted on any computer. And you can use a partition tool or something.

Yes, one of mine is like that. But you need to have enough space on your USB stick.

Absolutely! The system doesn't matter, but it can't have the same name as file A inside.

The mirroring part is no longer available.

A computer with a Windows system (for making a boot disk) A USB flash drive of 4G or more.

Windows 10 system package.

Floppy pass Ultraiso software.

5. Click "Install":

6. Installation completed:

7. Open the Ultraiso software you just installed (you need to right-click the Ultraiso icon to select Run as an administrator under Windows7 system), and click "Continue Trial".

8. Now start to make the U disk version of the system disk.

Open the floppy drive software and plug in your USB flash drive.

Click Boot --- write the hard drive image.

Select your USB flash drive in the hard drive.

Click Write and you're ready to go.

Wait patiently: Success, you now have a USB flash drive version of the system disk.

Follow the above steps, and the USB flash drive boot disk of the Windows 10 image is completed.

Give you a software to use yourself. It's simple. Copy all the files in it, and then run the setup file. exe file, and then do it step by step. The site closes after ten minutes. Please be quick ...

The answer is no, because when you make the boot disk it is separate, and there is a special partition for storing things. My USB flash drive is a drive disk, and there are two partitions!

Do not modify the files required to delete the startup disk, you can put other files.

Is it possible to transfer the system of the system disk to the USB flash drive? First of all, use the copy tool to copy the files of the system disk (if you don't know which ones are useless, copy them all, and the system disk of ghost will copy the ghost file (file name. GHO (e.g

It's very simple, because the transmission speed of the U disk and the transmission speed of the hard disk are too far apart, and the data of the U disk is stored in the chip, the chip is very fragile, it is easy to be damaged, the chip is broken, and the data of the hard disk is engraved on the alloy platter with a laser, as long as the platter in the hard disk is not directly destroyed, even if you want to completely erase the data of the hard disk, it is not a matter of a while, and the data stored by the hard disk is much safer than the U disk. It is true that there are SSD solid state drives in the form of U disks, and the transfer speed is much faster than ordinary hard disks, but the disadvantage is that it is expensive and the capacity is not very large.

This already has it.,It's a solid-state drive.,The storage medium is the same as the U disk.,Now ultrabooks all use solid-state drives as boot disks.,It's very fast.。

However, SSDs also have the disadvantage that the number of reads and writes is not as much as that of ordinary mechanical hard disks, and at the same time, they are also expensive.

The largest SSD is currently available, **140,000, we can't afford to use it.

That's because your USB flash drive doesn't have boot information and can't boot the computer.

If you want to use a USB flash drive to install the system, there are many ways, if you just want to install the system in the CD, just use the software to make the disc into an ISO file and save it to the computer, and then use the burning software to burn the ISO file to the USB flash drive.

You can't install it if you do this. Not to mention the installation, it is impossible to even boot.

It is recommended that you make a boot U disk, and then restore the win7 system disk to an ISO file, you can use UltraISO to open the system disc and save it as an ISO file.

Then install the system as follows the method below.

Boot Disk Creation and XP or Windows 7 System Installation Concise Tutorial:

1. First of all, you need to make the U disk into a boot disk, I use the "U disk boot computer store", you can make the U disk into a boot disk.

2、Use software to make the installation disk of win7 into an ios image file,Copy this file to the U disk。

Win7 installation disk should be an image file, right, generally the installation disk inside the PE system runs automatically and then the image of win7 is installed with a U disk to do a boot disk must first do a U disk boot disk Otherwise, there is no way to run the program inside.

This doesn't work.,Can't you make a ghost backup for the computer with win7 deep optimization.,Use ghost to restore when you install the computer in the future? It's a little easier and quicker. If you can't do it, there are a lot of does online.

When installing the computer, you can directly use the U disk to enter the PE to restore the ghost, which is fast and convenient.