n96 shows low memory, n97 always shows low memory, what is the reason?

Basically, it is caused by too much software you install or run, and the solution is that you choose to quit when you exit after opening the software during the use of your phone, and do not close it directly. There is also a long press on the function key, and then select the software that has not exited to close. If it really doesn't work, just turn it off and turn it back on.

Let's see if it's caused by you opening too much software and not closing it.

The memory here is running memory, and if it doesn't work, restart.

Second, it may be that your mobile phone is poisoned, and if you don't say it, NetQin will kill it. 3. You have too many ng games installed in your phone, delete some of them. A while ago, my phone always prompted that the memory was insufficient, and then I deleted a lot of ng games, and now it's good!

This, generally just reboot.

It can't be a real lack of memory, it must be a problem with the system. If it really doesn't work, you can choose the grid machine (enter * in the standby interface, there is no harm to the fuselage), but after the grid is finished, all the things in the phone are gone, please make a backup.

It should be explained that the running memory is not enough to cause this prompt and you can no longer run large programs, and the problem can be solved again after restarting. This is because the running memory of the mobile phone is very limited, and too many background programs will make the running memory even less, so, the solution is that when you use this program, the program opened in the background is closed as much as possible, if you must open it in the background, it is not too much, like communication records, business card holders or something in the background, it is best to close it, so that the running memory will try to get it back. This reduces the number of such phenomena.

It's a procedural issue.

Tip: Out of memory Need to delete something, right?

But when I clicked it, there was no response.

This is done by typing *

Enter the password: If you don't set a password, it's 12345

Then make sure that the correction is not caused by how much you have installed the program.

Rather, it is the relationship between the fragments of the permanent ARM program.

The memory of the phone is full, not the card, just delete the things of the phone and see if there is any software for the game, it is generally recommended to install it to the card.

The prompt "Insufficient memory" means that the running memory of the mobile phone is insufficient, not the storage space of the mobile phone's C drive. There are many reasons why the standby state indicates that the memory is insufficient, such as:

1) This may happen if some software is running for a long time.

2) Don't install too much software running in the background, some boot self-starting software you can't see when you press and hold the function key to enter the task manager.

3) Some input methods conflict with some other software, and occupy a large amount of running memory.

Hello and welcome to the Samsung Digital Services platform.

Smartphones are a microcosm of a computer, and the phenomenon of insufficient memory is often seen, and there are two situations of insufficient memory.

1.The app is running out of memory.

Most smartphones do not have high memory If you use several software at the same time, it will lead to such a phenomenon The file will not open and close at the light The phone will restart at the heavy Solution Clear the cache Close the software you don't need Don't open too many background programs Standby mode will also affect the memory The memory is the highest when the phone is turned on The longer the time after booting up, the memory of the phone will slowly drop But it will stop at a certain time.

2.The storage memory is insufficient.

The C drive of the mobile phone is not high, too many installers in the C drive will cause the phone to slow down, just like the computer, the processing method will be uninstalled in the C drive, and the machine can be used when necessary.

Now there are two kinds of mobile phone memory: RAM dynamic memory, commonly known as running memory, which is the same as the memory in the computer; ROM used to be static memory, and with the development of technology, ROM now usually refers to non-volatile memory, or in other words, they can still hold data when the system is out of power.

Also known as mobile phone memory, it is used to store the mobile phone system and some user data (including the programs installed by the user), and the role is basically the same as the hard disk, but the hard disk is definitely not a ROM

Hello, I'm 97 too

1. SMS storage check is not in C

2., ** storage is not in c

3.。It is recommended to flash the machine, grid machine, because even if you don't install something to C, install it into a memory card or E large capacity, C will still slowly become smaller, the reason is not too much, you install something must have a file related to this thing in C. That's my understanding.

How many years did your SIM card last? Change to a new card, it should be able to solve, my n81 is a good replacement card, other methods are useless.

No doubt mine is the same. And it is often turned on several times before the software can be opened.

Let's take a check! Simple and easy to use....

Smartphones are a microcosm of a computer, and the phenomenon of insufficient memory is often seen, and there are two situations of insufficient memory.

1.The app is running out of memory.

Most smartphones do not have high memory If you use several software at the same time, it will lead to such a phenomenon The file will not open and close at the light The phone will restart at the heavy Solution Clear the cache Close the software you don't need Don't open too many background programs Standby mode will also affect the memory The memory is the highest when the phone is turned on The longer the time after booting up, the memory of the phone will slowly drop But it will stop at a certain time.

2.The storage memory is insufficient.

The C drive of the mobile phone is not high, too many installers in the C drive will cause the phone to slow down, just like the computer, the processing method will be uninstalled in the C drive, and the machine can be used when necessary.

Now there are two kinds of mobile phone memory: RAM dynamic memory, commonly known as running memory, which is the same as the memory in the computer; ROM used to be static memory, and with the development of technology, ROM now usually refers to non-volatile memory, or in other words, they can still hold data when the system is out of power.

Also known as mobile phone memory, it is used to store the mobile phone system and some user data (including the programs installed by the user), and the role is basically the same as the hard disk, but the hard disk is definitely not a ROM

Mobile phone memory (ROM) and memory card (SD) should be distinguished, some things can only be installed on the ROM; Some can be installed in the SD, please check the SD status before installation. If it doesn't work, change the SD, it may be a problem with the SD