How about the moving iron headphones, is there anything worth entering the low end moving iron?

The sensitivity of the moving iron is higher than that of the moving coil, the main reason is that the structure of the moving iron unit is almost a closed container structure, and a little current can drive it. It is precisely because of the high sensitivity that the transient performance of the moving iron earphones is better, and the dynamic performance, instantaneous detail performance, and sound density of the first are far better than the dynamic earbuds. Refer to the encyclopedia for details.

Moving iron headphones are more suitable for female voices in the human voice than dynamic headphones, but it cannot be said that all moving iron headphones are good at female voices, such as Sony's XBA-40 is a typical low-frequency multi-vocal moving iron headset, with the popularity of moving iron technology, ** has also dropped sharply, for example, UE600 was sold at 799-699 when it was just listed, and now**diving to between 300-400 is also normal (this headset has fakes, please don't be greedy), Now the low-end moving iron headphones on the market with good evaluations are Sony's XBA-C10, innovative IE3, UE's UE700 (discontinued, there are still second-hand areas) UE600, Audio-Technica's CK90PROMK2 (second-hand is more suitable, try to buy new ones), Tianlong's C400, Jieshi X10, X11, and some discontinued, if you are interested, it is recommended to go to the second-hand area to take a look, such as TF10, TF15 and the like.

Moving iron headphones and dynamic headphones are stronger than dynamic headphones in terms of treble, and bass is not as good as dynamic headphones. It is suitable for listening to various musical instruments, electronic music based on treble, and classical symphonies can be listened to by multi-unit moving irons. In fact, this still depends on the individual, and some people will like the low frequency where the quality and quantity of moving iron are not much.

The low-end moving iron should look at the low-end, but it is usually considered low-end by a single unit moving iron.

The more common choices are innovative IE3, Sony XBA10 or 20, Jieshi X10, etc., and in China, Asturd also has a good single-action iron, which can be searched and seen.

If you have a limited budget, you can go to the second-hand Shure 315, E4C, which are all good choices for low prices, but pay attention to choosing a merchant with good evaluation. Don't buy DIY moving iron headphones, usually Shure 525 shells but ** very low.

The advantage of moving iron headphones is that the dynamic performance is very good, and the disadvantage of moving iron headphones is that the frequency response range is narrow.

A moving iron headphone is a headphone that is transmitted to the center point of a miniature diaphragm through a delicately constructed connecting rod to produce vibrations and sounds. Moving iron headphones can be easily placed in the ear canal due to the much smaller size of the unit. This effectively reduces the area of the ear part and allows it to be placed deeper into the ear canal.

The geometry of the ear canal is larger than that of the pinna.

It is much simpler and belongs to the round shape, so a soft silicone case can already play a good role in sound insulation and sound leakage prevention compared to traditional earbuds.

Advantage. The sound insulation effect of the moving iron is better than that of the moving coil in the ear. Due to the large area of the moving coil unit, and more space and air are required to participate in the vibration in the process of sound generation, the sound leakage phenomenon cannot be effectively controlled; The moving iron can effectively reduce the area of the ear part and can be placed in the deeper part of the ear canal.

Almost all dynamic headphones have air vents, while air vents are rarely seen on moving iron headphones, with the exception of CK9. Because the geometry of the ear canal is similar to that of the ear canal, which is much simpler than the pinna, a soft silicone case can already play a good role in sound insulation and sound leakage prevention compared to traditional earbuds.

The moving iron headphones vibrate the diaphragm plate through a metal rod, which creates vibrations and emits sound. Moreover, the unit is located in a relatively closed space, which is not affected by the external temperature, humidity and use process, and its frequency response curve is relatively stable.

The moving coil unit has a large contact area, and its vibrating diaphragm is generally combined by glue and coil, so it is relatively easy to be affected by external environmental factors.

In terms of unit production, the unit of the moving iron headset is bought, and you can ship it by doing a good job of divider, which is easy to have good quality, and the hearing sense can be fine-tuned. Of course, there are also those who have enough qualifications or enough orders, and then let the moving iron manufacturer help develop and customize, and then sign an exclusive agreement, so that it is not so easy for others to imitate headphones, it can only be said to be close, not exactly the same. Therefore, whether it can customize its own moving iron unit is also a reflection of the strength of headphone manufacturers.

And the dynamic coil, if you want high quality, you can only develop a better and stronger unit, and the unit can be said to be a one-step formation of quality tuning, any dissatisfaction must be redesigned, research and development time is long, difficult, and expensive.

Among them, the biggest feature of the moving iron earphones is low impedance, high resolution, and balanced without sound coloration, excellent playback of sound details, and the layering of low, medium and high frequencies is also obvious. If it is a multi-unit moving iron headset, the sound effect will be better, but it is relatively expensive.

Secondly, the moving iron is small in size and easy to wear, but due to the small diaphragm area, its frequency response range is also relatively small.

In order to expand and improve the frequency response of the three frequencies of the moving iron, manufacturers generally choose multiple moving iron units, or choose a ring iron mix, so that one or more units can be distributed in each frequency band. At this time, it is a test of the manufacturer's crossover technology, because the perfect crossover technology can add to the headphones, and the sense of detail of the sound is stronger, but if it is unfavorable, the disadvantages of multiple units will naturally appear.

Back to our question "Is the more headphone units the better", obviously the key to the moving iron multi-unit lies in the frequency division technology, if there are enough units, the frequency division technology is not good, it is also in vain, so the more headphone units are not the better, the premise is that the frequency division technology is also good. There are a lot of multi-unit headphones with a good reputation, such as Weston W40, Shure 846, etc., in addition, there are also many good headphones when the unit, the classic Yintemei ER4 series, Goethe GR10, Weston UM1, etc., so the headphone unit is more or less good can not be generalized. All in all, simple multi-unit superposition is meaningless, and the most important thing is to be able to do a good job of connecting the three bands with good frequency division technology.