How does CAD make the annotated values change with the scale?

It's about layout viewports and callouts! (I personally understand it this way) 1. First build the drawings in the model, and then enter the layout, "MV.""window select the viewport, go into the viewport and select the sheet you want to put into scale, and then.

zspace, and then enter the scale: (1 1xp, or 1 5xp...) The scale must be followed by xp as a suffix, if you find that your drawing is completely in the viewport window, you can double-click the left mouse button outside the viewport 2 times to push out the viewport, and then adjust the size of the market, until you know the right one!

2. If you want to keep the size of the labeled data unchanged, first you need to create a new label, and then modify the label.

Adjust. Label feature scale.

Use global scale.

Set your callout scale to the scale of your viewport!

There are two ways to do this:

1. Modify the annotation style, "Format Annotation Style Primary Unit Measurement Scale", and modify the measurement ratio to 1 3

2. Put the 1:150 graphic into the layout. Set the scale of the layout viewport to 1 3.

Both of the above methods will do.

CAD is Autodesk

The company has developed an automatic computer-aided design software, which can be used for drawing, two-dimensional drawing, and basic three-dimensional design, without knowing how to program, it can be automatically drafted, and is widely used in the world, and can be used in civil engineering, decoration, industrial drawing, engineering drawing, electronic industry, garment processing and other fields.

1. Open the CAD diagram that has been made, select all (including annotations), and zoom in.

2. Remember the scale factor of your own scaling, that is, the CAD drawing is reduced by half, and you will find that the annotations in it are also doubled.

3. Then open the annotation style, click the corresponding annotation style, and click "Modify". Read it.

4. Enter the column of "Main Unit" and modify the "Scale Factor" under "Proportion of Measurement Unit".

<>6. Then you will find that your graph has been scaled to the size you want, but the size of its annotation has returned to the original size.

The specific steps for CAD to reduce all the annotated numbers by a certain percentage are as follows:

1. First of all, we open the software of Brother Infiltrate Pure CAD and enter the operation interface of CAD.

2. After calling the World Open CAD, I asked you to find the annotation option in the menu area above.

3. Then we click on the annotation option and find the annotation style option in its drop-down menu.

4. Click on the annotation style option and find the modification option in the pop-up dialog box.

5. Click on the modify option and find the main unit option in the pop-up interface.

6. Then we click on the main unit option and find the unit of measurement scale option in its settings.

7. Find the scale factor option under the scale of the measurement unit, and set our scale factor as needed in the input box after it, so that our annotation scale will change.

Modify the method of drawing size size scale in CAD:

1. Before drawing, according to the actual size of the drawing, determine a scale ratio (can be printed on the drawing completely, if there is GB, select an appropriate scale standard from GB). Menu - Format - Dimension Style, click "Modify", click "Main Unit", and set the "Scale Factor" in "Measurement Unit Scale" to 1.

The boundaries of the drawing should be set a little larger than that of the drawing (because the border and title block of the drawing should also be added, and a standard drawing should also be left with the review signature and the clerical space for the review opinion).

2. How to set the drawing boundary: format The graphic boundary command, enter the absolute coordinate value in the lower left corner in the command bar under the interface, and you can also determine it directly, because the default coordinate value in the lower left corner is this value. If it is a three-dimensional drawing, add the z coordinate value) OK and then enter the absolute coordinate value in the upper right corner, for example, OK.

This setting can be used to create drawings that are equal to or less than 6000mm*4000mm, including the border.

3. When the drawing is modified in proportion, first use a rectangular frame close to the regular drawing scale (420,297) to set the drawing, and then divide the length or width of the rectangular size by 20, you can know the drawing format, and then reversely, make a corresponding picture frame and title bar, (preferably the block element that has been made) magnify it 20 times to set the figure OK, but before printing, you must pay attention to the annotation style (arrow and text) in the figure corresponding to the output ratio, For example, the global scale of the label is changed to 1:20.

The specific steps are as follows:

The materials that need to be prepared are: computer, CAD.

1. First open the required CAD and enter the page.

2. Then click the command bar and enter "sc", press enter to confirm.

3. Then click to select the base point and press Enter to confirm.

4. Then click to enter the desired ratio, and press enter to confirm.

Why is the display scale modified in CAD, but the original dimensions are still unchanged?

Hello, dear. 1. Cause 1Run CAD, click on the annotation of the straight line in the figure to see the annotation style 2

Enter the shortcut key d in the command line, and then the default global scale of the visible label feature scale panel is 1, and then we change its value to 100, and return to the drawing interface to see if the label of the line has changed, 3At this time, it is found that the global scale is not the default 1, nor the changed 100, but 50. Why is this happening?

This is because when we draw a graph, the scale is not modified through the Modify Dimension Style dialog box, but through the properties panel. There is also a situation where you modify the text style vertically, which will cause the global scale of the annotation to change and the size of the text cannot be modified, we must first enter the [Text Style Manager] and change the font height to 0 Second, Solution 1If the height of the annotation is 0, but there is no sail operation to change it through the [Modify Annotation Style] dialog, we can only select the annotation and then change the value in the properties panel.

2.Use the Update Label command, i.e., dimstyle, click the label you want to change, and then execute the Update Label command, and then make changes to the label.

You can change the scale of the original CAD drawing from 1:200 to 1:100 by the following methods, and then the size of the marked drawings remains unchanged, and the specific steps are as follows:

1. Open the CAD drawings that need to be changed, select all the drawings that need to be changed, and note that the blind sail should be selected together with the annotation:

2. After selection, click the zoom function in the toolbar:

3. After clicking, you will be asked to select the base point of scaling, click a point in the screen at will, and then you will be prompted to enter the scale factor, that is, how many times to scale on the original basis, enter here, and then click Enter to confirm:

4. After confirmation, the annotations in the drawings will also be changed, from the original 10*15 to 5*:

5. At this time, click "Format" in the toolbar above, and then select "Dimension Style".

6. Click "Modify" on the right in the style manager that opens

7. Find the "Main Unit" in the page that opens, change the scale factor to 2 below, and then click Brother Hail to confirm:

8. Return to the drawing page, and the marked size is restored to 10*15: