How to use 360 to block off the anti rubbing network I also use the wireless router

Set a password for wireless routing.

Now whether it is life or work, we are inseparable from the wireless network, if the wifi appears very slow, the phenomenon of Caton will affect our use. In fact, this situation is likely to be due to our wifi being rubbed against the network, so recently some netizens asked where the 360 anti-rub network is, and the following article will share with you how to use 360 to set up the anti-rub network.

Here's how:

1. First open the main interface of 360 Security Guard, and then click on the function list.

3. At this time, the 360 traffic firewall will be disturbed and popped up, and we click "anti-rubbing network";

4. Select the anti-rubbing net "Activate immediately";

9. If it is not a device you allow, you can click "Change Password" to reset the router, and the page will explain how to modify it. In this way, our network security is greatly increased, and the Internet speed is smooth and stable.

10. If you turn on Wi-Fi, it is best to change the password, your password may have been leaked.

The above is an introduction to how to use 360 to set up an anti-rubbing net, and netizens in need can follow the above steps to operate.

Many users will choose to use 360 portable wifi to share the network of the computer to connect to other devices. But sometimes we find that the Internet speed becomes very slow, and we usually wonder if someone is rubbing the Internet and slowing it down. At this time, you can use the method I recommend for everyone:

Use the anti-rubbing network function of 360 portable wifi to solve this problem.

The anti-rubbing network function of 360 portable wifi

1. Open the main interface of 360 portable wifi and click the menu button in the upper right corner;

2. Click "Settings Center" in the menu that opens;

3. Switch to "Security Protection", you can see the "Anti-Rubbing Net", click the button on the right to turn on the switch, and click OK;

4. In this way, a floating window will be opened, which will be displayed when a device is connected;

5. If you find that an unknown device is connected to our wifi, then you can add it to the blacklist, click the icon on the right side of the device, and select "Add to blacklist".

When we find that the network speed is slowing down, it is likely that someone else will rub the Internet, then we can try to use the above methods to solve the problem.

1.How to prevent wireless routers from rubbing the Internet.

2.What is the general way to change the router address to prevent network rubbing?

3.The fast router checks the network settings.

4.How to prevent the network from being rubbed by the win7 system.

5.How to prevent others from rubbing our nets.

6.How to prevent others from rubbing the net.

Can be turned off,First click the expansion function,Enter the firewall of the rubbing network,Then click the anti-rubbing network here to turn it off,It's really easy to ignore the location.,It's not easy to find.。

Tools Raw materials.

Computer 360 Security.

Router Method steps.

1：1.The computer is connected to the 360 secure router.

2：2.Open the Electro-Brain Browser and enter.

Entry or 3:3Open the home page of 360 Secure Routing and select Feature Extensions

4：4.Select Anti-Rub Firewall and go to 5:5Once opened, select the password protection question and set the password protection answer, then click OK to save successfully.

This can't be turned off, if you want others to rub the Internet, you can not set the router password, or give the password to the people who want to rub the Internet, and let them enter the password to connect. This feature can be very good to protect personal privacy and prevent others from surfing the Internet.

No, the so-called anti-rubbing is to crack the password. 360 just adds a layer of density.

Hello buddy, the anti-rubbing network function in the 360 security guard function is not affected by your own wifi, it is convenient to view the software of the devices connected to your wireless network.

Friends, Wi-Fi is a technology that can wirelessly connect terminals such as personal computers, handheld devices (such as PDAs, mobile phones) and other terminals to each other. The anti-rub net function of 360 Security Guard will not affect its use.

<>2. At this time, we are turning on 360wifi, which is very important.

3. At this time, we click on the settings center.

4. At this time, we are clicking to confirm, which is very important.

5. At this time, we are opening the link.

6. Finally, when we open the management settings, we can see whether others are linking to your computer.

1. Set a password.

2. At this time, the 360 portable wifi information setting interface will pop up, click the down arrow setting icon, and select "Settings Center".

3. At this time, you can set the wifi connection password to keep others out.

2. Speed limit. 1. Open "Connection Management".

<>3. Authorization Limit.

Click on the "Host Confirm Connection" option on the 360 portable WiFi settings interface, and you can only connect before others can connect to your WiFi.

Fourth, blackmail. <>

2. And select "Pull into Blacklist" in the pop-up menu to block the friend.

Enter 360 directly turn the shield switch and turn it on.

You have it in the routing settings.

Yes! I'm dead in the same situation as you. But it's okay!

If you are still worried about this, you should set a password when using wireless routing settings, see the manual for specific methods, and note that you should use WAP2 passwords, which are easy to crack with ordinary encryption methods. In addition, the "Enable SSID Broadcast" item should be removed from the router's wireless network settings, so that others will not be able to see your route when searching the network, and they will not be able to rub your network. If you want to join a wireless network, you can manually add the SSID of your route.

Hope it helps!

Hello 360 anti-rubbing network It is a tool to view the computer connection in the wireless LAN, after opening it, you can see that if you find that there is an unknown computer connected to your wireless LAN, you can change the password of the wireless LAN.

No, it is connected to the main server in the network center.

is to check the number of computers connected to the same route.

What should I do if I find that my wifi has been rubbed by others and the network speed has become very slow? Let me tell you how to prevent others from rubbing the network with 360wifi, I hope it will help you!

Turn on 360 free wifi:

Friends first open their own computer on the "360 security guard", no friends need to install one first, and then on the right you will see that there is a "free wifi", click on it, turn on the 360 free wifi on our notebook.

Set password protected wifi:

Method 1: Click the wifi icon at the bottom of the taskbar on the right side of the computer to open the 360 free wifi setting interface, set a secure password in the wifi password column, and change a password from time to time, so that you can better protect your wifi from being rubbed by others.

Method 2: If we have 360 WiFi at any time, we can also set "Director Confirm Connection". That is, when others connect to our wifi, they need to get our definitive permission before they can connect.

In the "Connection Method" column, click and select "Host Confirm Connection", and then click "OK".

Anti-rub net settings:

On the interface you just opened, click to switch to the third "Security Protection" interface, and remember to turn on the switch of "Anti-Rubbing Net". In this way, once someone connects to our wifi, a floating window of connection prompt will pop up on our computer desktop.

<> Hidden Wifi:

Click below the button of "Security Protection" to switch to the interface of "Advanced Settings", and click to check the last "Hide WiFi" before confirming. Hide the wifi signal turned on on our computer, others can't find our wifi signal, and naturally can't connect and rub the network.

Speed limit setting wifi:

When the signal window interface of someone else connected to our wifi automatically pops up on our computer, we can set the speed limit for their connection. Click the settings button on the right side of the interface, and click on the pop-up list to select "Speed Limit Management".

<> pull into the blacklist: