The computer does wireless routing, who will? I ve done it myself

See what I know has been.

First of all, the network card should support wireless expansion, upgrade with the driver wizard, and see if there is an additional wifi network card. Then set it up with the command prompt. Detailed picture: "No wireless router play win7 wireless sharing Internet access" This topic can be.

The following is the text description:

Run the following command in the command prompt to enable the virtual wireless NIC:

netsh wlan set hostednetwork mode=allow ssid="win7 ap wow!" key=wifimima

Enter the command to enable the virtual wireless NIC.

There are three arguments in this line of command:

Whether to enable the virtual Wi-Fi network card, change it to disallow to disable, and the virtual network card will disappear.

Specify the name of the wireless network, preferably in English.

Specify the password for the wireless network. This password is used to encrypt the wireless network with secure WPA2, which can prevent the network from being rubbed off.

These three parameters can also be used separately when needed, for example, if you only want to disable the virtual wifi network card, then just use the mode=disallow command to do it.

Next, in order for the iPad to use the network that the laptop is already connected to, you need to enable the "Internet Connection Sharing" feature. Open the Network and Sharing Center window, click the network you are connected to, and click Properties in the network status dialog box.

Open the connection properties.

In the properties dialog box, switch to the "Sharing" tab, check "Allow other network users to connect through this computer's Internet connection", and select the network connection that allows them to share the Internet, which is our virtual WiFi network card.

Enable Win7 connection sharing.

Continue running the following command in the command prompt:

netsh wlan start hostednetwork

Enter the command to turn on the win7 virtual wireless network card.

When we see the prompt "Bearer network started", it means that the wireless network we set up earlier has been turned on. Going back to the network connection, you can see that the virtual wireless network card has turned on the wireless network we specified.

Activate win7 virtual wireless network card.

After completing all the above settings, you can see the wireless router we opened in Win7 in the network connection of the iPad, and the name is the SSID= the character "Win7 AP WOW!" entered in the command prompt for the first timeThe password is the character "wifimima" after key=.

Resources.

Only two network cards can be used for wireless routing. For example, a notebook, tell you about it.

The wired network card can be connected to the external network, the wireless network card "wireless network configuration" is changed to point-to-point, set the name, password, etc., the wired network card is set to share the Internet in the advanced, and the other machine searches for the local wireless network card, changes it to the same configuration network segment, and you can pass the external network on this machine after connecting.

You can use the "free wifi" that comes with 360 to use the laptop as a wireless router, and the specific operation steps are as follows:

1. Click to open the "360 Security Guard" in the computer.

2. In the "Functions Collection" in "360 Security Guard", find "Free WiFi" and click to open.

<>4. After opening, "360 free wifi" will appear on the computer desktop, and after setting the name and password, the notebook can be used as a wireless router.

You can use the "free wifi" that comes with 360 to use the laptop as a wireless router, and the specific operation steps are as follows:

1. Click to open the "360 Security Guard" in the computer.

2. In the "Functions Collection" in "360 Security Guard", find "Free WiFi" and click to open.

<>4. After opening, "360 free wifi" will appear on the computer desktop, and after setting the name and password, the notebook can be used as a wireless router.

This one is very simple to upgrade the latest Intel wireless driver and can be used automatically without complicated settings.

Of course, you can use your own laptop as a wireless router, and my electric hand imitation brain is"win10"Most computers use this, so I'll use this to illustrate how to do it.

Start by right-clicking on the network icon in the bottom right corner, right-clicking, and selecting "Open Network & Internet Settings".

Click to enter to rent infiltration after the following **, select the mobile hotspot and click it.

The disadvantage of the arrow in the following ** is to turn on the hotspot,On behalf of the notebook has become a wifi switch,And the red box on the right is the wifi and password,After opening, you can use your mobile phone to search for this wireless network,Enter the corresponding password to access the Internet。

Pick up your phone and try it, it's actually quite simple.

1. Open Start Menu, Attachments, find and right-click Command Prompt, and select Run as Administrator.

2. Enter the following command in the window: netsh wlan set hostednetwork mode=allow ssid=***key=*** and press the enter key to execute. The content after "SSID" is the name of the wireless hotspot after completion, which is customized; After the "key" is the password you set for your hotspot, which is eight digits, customized.

A connection called "Wi-Fi 2" will appear in "Change adapter settings", which will be used later.

3. Open Control Panel, Network & Internet, Network & Sharing Center, and then select Change Adapter Settings on the left.

4. Right-click on the network connection you want to use, and then select the "Properties" and then "Sharing" tabs.

5. Tick the first checkbox, select "Wi-Fi 2" in the "Home Network Connection" drop-down menu, and click the "OK" button.

Note: After the setup is complete, please follow the system prompts to disconnect from the network and reconnect once for the setup to take effect.

6. Use your phone to connect to the hotspot you just set (take Android phones as an example). Enter the password set in the second step, click Connect, and your phone will be able to share your computer's network connection with high-speed Internet access.

Plug in the power supply, connect to the WLAN, and then test.

You will see that there is an address and account password behind the router, and after connecting, enter the address you see on the router in the browser, which is usually.

Set up the router in Figure 2

Enter the corresponding account and password, and generally the newly purchased router is admin to set up the router Figure 3

Enter the operation interface, find the "Setup Wizard" on the left, and click to enter.

Setting up the router is shown in Figure 4

Enter the setup wizard interface and click Next.

Setting up the router is shown in Figure 5

If it's dialing, then use PPPoE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be the cell bandwidth, etc., set the router Figure 6

If you choose PPPOE dial-up Internet access, you need to fill in the Internet account and password.

When you're done, click Next.

Set up the router in Figure 7

Enter the wireless settings, you can fill in casually, and most of the modes use 11bgnThe wireless security option is WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network.

Setting up the router is shown in Figure 8

Click "Done".

Setting up the router is shown in Figure 9

The router will automatically reboot and the interface that will appear after success.

Set up the router in Figure 10

This is okay, there are many such tutorials in the evening, I have used all of them, you can go here and take a look.

w7 system, this is the tutorial** very clear. To women oh o( o

In my understanding, by sharing the local connection to the wireless network, then other devices access the Internet through the wireless network connection. Here, I think this wireless network acts as a route equivalent. When I am not connected, he is standby, that is, it shows that it is not connected, and when other devices are successfully connected, he will enter the working state and become connected.

Internet -- Local Connection -- (Shared) -- Wireless Connection (Share to Internet) -- Device to be connected to the network.

When the local connection is shared, the IP address of the wireless connection is inconsistent with the local connection. The IP of the device to be connected is the same as the IP of the wireless network connection, so I think the wireless network connection plays a routing function.

As long as you're connected, you're good to go.