How to make boot boot not show up in 360 inside 20

Updated on number 2024-02-08
6 answers
  1. Anonymous users2024-02-05

    Are you saying that some programs are not allowed to start automatically? Are you XP or Win7?

    If it's win7. Please enter as follows:

    The same is true for the XP system.

    If correct, hope, thank you!

  2. Anonymous users2024-02-04

    Does the landlord want to start without starting 360? You can enter msconfig in the run, select the startup item in it, cancel the startup item of 360, and make sure to restart, or uninstall it directly.

  3. Anonymous users2024-02-03

    1. First of all, turn on 360 Security Guard, and click the optimization acceleration function at the bottom of the main interface

    2. In this way, you can open the optimization acceleration page, find the startup item in the pop-up optimization acceleration page, and click to enter:

    3. At this time, you can view all the startup options for installing the application, and if you want to prohibit it, click to prohibit it. The above is the introduction of the method of 360 to view the boot startup items:

  4. Anonymous users2024-02-02

    Please recall whether the automatic restart occurs under a specific operation or software, it is recommended to perform a simple check according to the following conditions: please check whether the fuselage is automatically turned on and off, and if so, it is recommended to cancel the attempt; 2.If it does not occur frequently and there is no fixed rule, it is recommended to use software such as mobile phone security guard to regularly adjust and improve the stability of the device system.

    During use, you can close unused background programs to ensure that there are enough running memory and other resources to support the current program running. Reboot when a loss occurs in a particular third-party software is now:1It is not ruled out that it is due to compatibility problems that lead to automatic restart, it is recommended to uninstall and reinstall or replace other software of the same type to try to brighten the mold; 2.

    This can usually be improved, but it is recommended that you back up your personal data and try a factory reset after attempting. b.Occurs without a specific pattern:

    1.It is recommended that you remove the SIM card or SD card to start up and observe, it can be improved after removal, it is recommended to replace the SIM card or SD card, if so, it is not excluded that the card slot is abnormal and causes the air to be slow, it is recommended to send it to the Lenovo site for repair; 2.If you have other batteries, it is recommended that you replace them, and it is not excluded that the battery is abnormal or too short; 3.

    If there is no significant improvement after the above operations, please back up the fuselage data for factory reset. If the problem still cannot be effectively solved and affects your normal use, it is recommended that you take the time to go to the maintenance station for specific testing and treatment.

  5. Anonymous users2024-02-01

    Summary. There are two situations,The first is the system stuck,If the mobile phone is used for too long,The original system may not be able to keep up with the times,And the 360 mobile phone that is not updated in time will be stuck,It is normal to be stuck in the 360 interface。 The second is that the mobile phone is poisoned and dies, and this situation will also appear stuck in the 360 interface.

    If the phone can't be turned on, generally enter the recovery first to double clear (restore factory settings and empty cache), if it still doesn't work after double clearing, you can only use the line brush to save the bricks.

    The solution to the 360 mobile phone car cover can't be turned on is as follows:1Start by holding down three keys:

    Volume +, Volume -, Power Key, etc. appear in the selection interface (there are options: Restart, Empty Data, etc.) 2Press and hold both keys:

    Volume +, volume -, etc., after the interface shows no movement (360 logo), after the system is released, the system will automatically restart.

    There are two situations,The first is the system stuck,If the mobile phone is used for too long,The original system may not be able to keep up with the times,And the 360Hand cleaning machine that has not been updated in time will appear Caton,It is normal to be stuck in the 360 interface。 The second is that the mobile phone is poisoned and dies, and this situation will also appear stuck in the 360 interface. If the phone can't be turned on, generally enter the recovery first to double clear (restore factory settings and empty cache), if it still doesn't work after double clearing, you can only use the line brush to save the bricks.

  6. Anonymous users2024-01-31

    Summary. Or wait for the phone to finish discharging, and then charge it and turn it on.

    Hello, I'm going to help you inquire about some information and reply to you right away.

    This means that there is a problem with the mobile phone software, and it is recommended that you go to the after-sales service to repair the mobile phone.

    Do I need to consult you?

    I really thought you'd solve the problem? It turned out to be a lie.

    Press and hold the power off button for 6 seconds to try.

    Or wait for the phone to finish discharging, and then charge it and turn it on.

    After-sales service is the safest way.

    I tried it all but it was useless to come here and ask.

    That's bad.

    That's bad.

    I had to go for repairs.

Related questions
What should I do if the computer doesn't start at all?
10 answers2024-02-08

Based on the situation of the landlord, the computer does not start at all, you should rule out the software, display, sound, memory module problems, then the only possible problem is the failure of the hard disk; Problems with the power connection socket; The regulator is damaged. It is recommended to drag a repair person outside to check, they have all tools, and the door-to-door fee is roughly ranging from 20 to 50, you can bargain, I wish the landlord a computer as soon as possible.

AFTER BOOTING UP THE COMPUTER, JERIFING DMI POOL DATA APPEARS
9 answers2024-02-08

An error occurred in modifying the BIOS settings.

02.If it is the boot data of the magnetic region of track 0 of the hard disk, it is incorrect. If it is a hardware failure, use the backup component to cross-check by itself. >>>More

Help me organize the startup item management, boot boot item management
7 answers2024-02-08

In addition to the ctfmon input method, the others were deleted.

The host does not respond when it is turned on, and the computer host does not respond to any startu
7 answers2024-02-08

Can you hear the sound of windows when you start?,If there is no sound, it may be a big problem with the host.,If there is a sound, it may be that the monitor is not displayed.。

PM961 installation win10 can't start
11 answers2024-02-08

If you can't recognize the hard disk, you need to load the NVMe driver! ** Samsung's NVMe driver on the Internet,Then press F2 when you install it,Select this driver,That's it,I had a Lenovo yoga900 notebook before,Reinstall the system and kill me,I can't identify the hard disk all the time,I can't identify it when I enter PE,It's no problem to load the NVMe driver later!