What should I do if one of the screen of the Apple six mobile phone gets into the water and turns bl

The steps to resolve the problem are as follows:

1. If the screen turns black and you can't press the power button to turn it on, once the device is working, it is easy to short circuit and cause damage to the motherboard.

2. Remove the SIM card and wipe it dry to avoid losing contact information.

3. Remove the mobile phone case and other objects, and use a paper towel or cloth to remove the water outside the fuselage and in the crevices.

4. Wrap the fuselage with absorbent towels or paper towels for a few minutes to absorb as much water as possible.

Note: Do not use the method of throwing. Shaking will cause the water that has already entered the fuselage to spread, and it will come into contact with elements that cannot touch the water, causing even worse results. ）

5. Try using a cotton swab to absorb excess water from the earphones and small slits.

6. When you have removed all the visible water, put the phone into a bag full of rice, drain the air, and seal it. Then put the whole set in a slightly heated place, such as a computer heat.

Note: Do not put it in a high-heat environment, nor do you use a hot air dryer to blow it, doing so will damage the internal components. ）

7. Wait until there is no fog, it is best to put it in the bag for at least 36 hours, take it out, and naturally return to room temperature. Try it on and it can generally be used.

If the mobile phone accidentally gets into the water, you can try the following ways to deal with the mobile phone urgently to avoid secondary injury:

1. Please take the mobile phone to a dry and ventilated place as soon as possible, and use a dry paper towel or towel to blot the water stains on the surface of the mobile phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please remove the SIM card and microSD card as soon as possible.

4. Please bring your mobile phone to the after-sales department of the mobile phone brand for testing and processing as soon as possible to avoid unnecessary losses.

2. Please do not bake with a hair dryer or stove after water ingress, so as to avoid liquid flowing into the inside of the mobile phone and damaging the mobile phone at high temperatures.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, the data may be lost, it is recommended to ask the staff how to back up the data.

1. First of all, of course, the whole machine should be disassembled, and the corresponding screwdriver should be prepared before that. 2. When removing the screen, pay attention to gently separating the chiplet connected to the motherboard from the motherboard. 3. Before removing the metal shielding isolation layer, tear off the network access card and the card slot sticker under the network access card.

4. The last is to take a hair dryer to dry, but don't blow on the screen for a long time, such a high temperature will destroy the screen, even if the screen has a watermark, you can use the phone normally, the water in the screen will generally dry in two days, and you will see that the watermark inside is getting smaller and smaller. 5. Blow the front and back of the motherboard to ensure that there is no moisture residue, and try to blow out the water at the earpiece and buttons. 6. Finally, put the disassembled mobile phone in a dry and noisy place, preferably about two days, and then install it.

Summary. 1.Shutdown: This is definitely the first step to save the phone, no matter how much water ingress the phone, please turn it off first, otherwise it will burn out the circuit directly.

2.Check the location of water ingress: In most cases, the location of a large amount of water ingress into the mobile phone is generally the headphone jack and charging hole, because as long as it is not broken in other places, there are no cracks.

3.Check for external damage: if it's simply soaked in water, it's not a big problem. However, if it rains and falls out, check whether there is any cracks in the phone and water in.

4.Simple water intake: If it is just a simple water intake, then take a hair dryer, adjust to the cool breeze setting, and dry it with a small breeze. Since most of the water enters from the headphone jack, the phone should stand up.

5.Wait a few days before turning it on: simply enter the water, when the phone is dried, you can turn on the phone and use it normally, of course, if you can't turn it on, it can only be that the water enters too much, and the circuit inside is broken. It should be sent for repair in time.

The screen of the iPhone is black when it enters the water.

1.Shutdown: This is definitely the first step to save the phone, no matter how much water ingress the phone, please turn it off first, otherwise it will burn out the circuit directly.

2.Check the location of water ingress: In most cases, the location of a large amount of water ingress of Yeqiao bucket mobile phone is generally the headphone jack and charging hole, because as long as it is not broken in other places, there are no cracks.

3.Check for external damage: if it is simply soaked in water, it is not a big problem.

However, if it rains and falls out, check whether there is any cracks in the phone and water in. 4.Simple water intake:

If it's just a little bit of water, then take a hair dryer, turn it to cool wind, and dry it with a small breeze. Because most of the water is fed through the ear chanter mill hole, the mobile phone should be upright. 5.

Wait a few days before turning it on: simply enter the water, when the phone is dried, you can turn on the phone and use it normally, of course, if you can't turn it on, it can only be that the water enters too much, and the circuit inside is broken. It should be sent for repair in time.

There's water in it.

Summary. After entering the water, it is recommended not to turn on the machine.

Use a hot air blower to evaporate the water in the phone, and leave it for a while before turning it on.

This can ensure that the moisture in the mobile phone can cause a short circuit in the mobile phone and damage the mobile phone.

The screen of the iPhone is black when it enters the water.

After entering the water, it is recommended not to turn it on. Use a hot air blower to evaporate the water in the phone, and leave it for a while before turning it on. This can be kept open to ensure that the moisture in the phone can cause the phone to short circuit, and the phone can be damaged.

Hello dear, the screen of the Apple mobile phone is black when it enters the water, it should be a short circuit after the water and burns out the circuit board.

Second, the motherboard problem may be due to the damage caused by water on the motherboard of the mobile phone and the black shadow appears, and the mobile phone needs to be turned off and taken to a dry place to dry.

The problem of three cables may be due to damage to the cable connecting the screen and the motherboard, and it is enough to replace one cable;

4. For other reasons, close all background apps on the phone, and then restart the phone;

If the screen is damaged due to water ingress into the mobile phone, you can choose the following methods to deal with it: quietly tell the branches.

1. Open the back cover of the mobile phone and dry it with a blow dryer, don't get too close to the mobile phone, the temperature is too high and will damage the delicate electronic components inside. Second, send the mobile phone to the mobile phone repair shop, in the temperature box for 48 hours, this method is the safest and most effective practice. 3. Put the mobile phone in the rice bag for 24 hours.

Either way, there is no guarantee that the phone will be completely restored. For example, if the screen is damaged by water, the black spot cannot be recovered, although it does not affect the use, it is also a wound and sensitive mark. Special attention should be paid to the mobile phone with built-in battery, the first method cannot be used, it is best to choose the second way to deal with it.

It could be that the backlight part of the screen is damaged.

Analysis & Recommendations:

1. The screen is not lit, but you can see the text, which means that the backlight part of the screen is damaged, and it is likely that the backlight power supply part is damaged.

2. The screen can also display text, indicating that the screen is still good.

3. Because your mobile phone is damaged by water, it is not covered by the warranty, and you can only repair it at your own expense.

4. Pay attention: The repair file is likely to say that your screen is broken, and you tell him: I asked other repair files, and they said that the backlight power supply is broken, and there is no need to change the screen, but he just doesn't have this power supply in his hand, so I came to ask you.

5. It takes about 50 yuan to change a backlight power supply, and you have to ask about it then.

When the mobile phone accidentally gets into the water, it is recommended to do the following:

1. First of all, the mobile phone should be salvaged as soon as possible, and if the battery can be removed, the battery should be removed immediately to prevent short circuit.

2. Remove the SIM card to avoid losing contact information. The longer it stays in liquids, the more damage your phone will suffer for life.

3. If the phone falls into salt water, not fresh water. Salt water forms a "salt crust" in the phone's internals.

4. If the mobile phone unfortunately falls into seawater or other salty water, you need to gently rinse it with fresh water.

5. Wipe each part of the phone with a cloth or paper towel, and don't move or shake the phone too much to avoid water swimming everywhere inside the phone.

6. Try wrapping your phone in a cloth or paper towel for a few minutes to absorb excess water.

7. Turn on the cool breeze mode of the hair dryer and blow at the hole of the mobile phone at a distance of about 30cm from the mobile phone, and continue to blow for at least one hour.

7. Finally, wrap the phone in a thin tissue and put it in a jar or bag full of rice for at least 24 hours, during which time it cannot be turned on. Rice absorbs water very well and can save a damp phone.

8. The above is only a salvage measure, if there is still a failure, then go to the after-sales maintenance.

The iPhone can be used normally if it is flooded, but the screen is very dark, which means that your iPhone is still affected by the water, and it is recommended that you take the phone to a regular repair shop to check it to see if it needs to be disassembled.

This shows that the motherboard part has not been affected by water, but your screen turns black means that it is still in the water vapor, it is recommended to do a disassembly and cleaning, and it is also possible that the light sense of the front camera is water, so he can't identify it intelligently, causing the screen to be darkened.

iPhone mobile phone can still be used normally after the water will also appear all kinds of small problems because you did not take the after-sales service center for normal and regular maintenance, the phone or motherboard will have water marks and water residues, you had better take the phone to the Apple after-sales center for a comprehensive inspection and detection.

I suggest you turn off your phone quickly, then blow it with a hair dryer, let it sit for a while, and then turn it on to see if it is better. If you can make do with normal use for the time being, don't fix it yet. Because it is not cheap to change the screen of the mobile phone, whether it is the official after-sales service or go to other mobile phone stores.

The iPhone can be used normally after being flooded, but if the screen feels very dark, then you just wrap the phone in a cotton cloth, and use it again after absorbing the water, and see if it is normal, if it is still not normal, then go to repair it.

The screen may be eroded by water vapor, it is recommended that you send it to a repair point for cleaning to ensure that other parts will not be eroded, and if it is serious, the screen may need to be replaced.

The Apple mobile phone is in water, even if it can be used normally at that time, there may be problems in the future, so it is recommended not to use it immediately after entering the water, if possible, you can disassemble the phone, disconnect the battery, and then dry it fully before continuing to use.

The mobile phone can not be directly turned on and used when water enters, otherwise it will cause a short circuit and burn out the circuit, your situation is that the LCD screen is flooded, and it can't be used at all, go to the repair shop to replace the screen.

It is estimated that it is damaged, the waterproof function of the general Apple mobile phone is still good, if the brightness is adjusted to the maximum and it is still very dark, it is a problem with the mobile phone, go to the after-sales service to check it, or directly ** an Apple support, directly call Apple's official website.

Usually, if the mobile phone gets into the water, the first time after that is not to turn it on, use a hair dryer to dry or dry it, or go to the outside maintenance department for repair, do not try to turn it on.

That's because of the water on the screen, and it can't be restored, so the screen can only be replaced.

The screen shows that the circuit board is damp, try:

Use it for a while to see if you can use the electricity or heat of your mobile phone to get rid of the moisture

Check out the experts

The iPhone phone is flooded, this will definitely affect the screen, and the screen will not be displayed normally, so you need to change the screen.

If the screen is very dark, it is possible that the inside of your cable or the screen of your smartphone has been damaged by water or a part of the transistor has been damaged.

What should I do if my iPhone is flooded and can be used normally, but the screen is very dark?

You can try adjusting the brightness of the screen. There is this option in the settings.

Hurry up to the mobile phone repair shop and don't use it again to avoid greater losses.

Hello. If your iPhone gets into the water and gets a black piece, it may be caused by moisture getting into the inside of the phone. In this case, you can try the following methods to solve the problem:

2.Disassembly: Disassemble the phone as quickly as possible, and take out the battery, SIM card, memory card and other parts to avoid current passing through the damaged parts and adding several socks to damage.

3.Cleaning: Gently dry the phone with a dry cloth or absorbent paper, then put the phone into an airtight bag, add some desiccant, such as raw rice, silicone bag, dry towel, etc., wait for at least 24 hours to let the phone dry thoroughly.

4.Repair: If the above methods do not solve the problem, it is recommended that you contact Apple after-sales repair service for professional repair help.

If your iPhone gets into the water, it is recommended that you take the above measures as soon as possible to avoid further damage. At the same time, it is also important to avoid charging or using the phone, so that current does not pass through the damaged circuit board, which can exacerbate the damage.

Summary. <>

Hello, dear, very happy for your question, what happened to the screen of the iPhone in the water, help you find out that the screen of the iPhone is in the water is due to the hardware failure of the mobile phone caused by the water, I hope mine can help you, I wish you good health and a happy mood!

What's wrong with the water on the iPhone and the screen is dark.

Hello, dear, very happy with your question, the iPhone is in the water, the screen is dark, what's wrong, and the grand help you find out that the iPhone is in the water, the screen is dark, the phone hardware is due to the water ingress, so the hardware of the mobile phone is absolutely weak, I hope my absolute vertical can help you, I wish you good health and a happy mood!

Pro-liftoff,Apple mobile phone water after Zhaochai caused the screen to darken,Adjusting the brightness is useless,This situation must be due to water ingress caused by the hardware failure of the mobile phone。 It is recommended that the user send the mobile phone to the brand's customer service, so that the engineer can disassemble the phone and test it comprehensively. After the engineer re-examines the phone, he will find out the cause of the failure of the mobile phone, but because the mobile phone is a laughing fault caused by water ingress, the customer service will refuse the warranty, and if the user needs to repair it, he can only pay for the repair.