The iPhone can t join the network, how to solve the problem that the iPhone can t join the network

Apple wifi can't connect to the solution 1: join the network.

Confirm that Wi-Fi is enabled and that you're connected to a Wi-Fi network. Press "Settings" > "Wi-Fi". If Wi-Fi is off, tap the On Off icon to turn it on.

Choose a network. The available Wi-Fi networks are shown below. Find and tap the Wi-Fi network you want to join.

Apple WiFi can't be connected Solution 2: Verify the password.

Some Wi-Fi networks require a password to join. A password-protected Wi-Fi network has a padlock icon. If you receive an error when joining a password-protected Wi-Fi network:

1.Type your password slowly to verify that you are entering the correct password.

2.If you can't tap Join, the password is too short for that Wi-Fi network.

3.If you don't know the password, contact your Wi-Fi administrator.

Apple wifi can't be connectedSolution 3: Check the connection.

In the status bar or Wi-Fi menu, check the signal strength of your Wi-Fi network. The higher the number of signal grids, the stronger the signal. If you only have one signal, or you still can't find your Wi-Fi network:

1.Please move closer to a Wi-Fi access point or router.

2.Avoid potential sources of interference that could affect your Wi-Fi signal, such as concrete walls or microwave ovens.

3.Next, use Safari to open a webpage to check the connection. When using some public Wi-Fi networks, Safari

A web page may be displayed that allows you to log in to use the Services. Check this webpage for more information about signing in or subscribing to Wi-Fi service at that location.

Apple wifi can't be connected to the solution 4: check the wireless LAN.

1.If you have a strong Wi-Fi signal but still can't access the Internet, verify that you're using a Wi-Fi network.

2.Confirm that you're connected to the correct Wi-Fi network and not to another nearby Wi-Fi network.

3.Check the cable connection of your Wi-Fi access point or router.

Apple wifi can't connect solution 5: Reset network settings.

To reset network settings, tap Settings > General, then scroll down and tap Reset > Reset Network Settings. After your device restarts, try to find and join the Wi-Fi network again.

Apple wifi can't connect solution 6: If you still have wireless LAN problems, please try the following options:

1.Check out the following additional tips for using Wi-Fi.

2.Use iTunes to update your iPhone to the latest software.

4.Get tips from other iPhone users in the iPhone forums.

Generally, the password is misentered

Take iphone13, the system as an example, the solution of the apple mobile phone can not join the network is as follows:

1. Click Settings: Open your phone, tap Settings, and enter the settings page;

2. Click General: Find General and select the Restore option;

3. Click Restore: Click to restore network settings, enter the page, and enter the password;

4. Reconnect: In the pop-up dialog box, click Reset Network Settings, restart the network, and reconnect to WiFi.

If the Apple mobile phone cannot join the wifi when connected to the network, first check whether the password to connect to the wifi is entered correctly, and the password is wrong and the wifi cannot be connected. It's not a password problem, it may be an error in the Apple mobile phone system, it is recommended to shut down and restart the phone, and connect to the network. There is also a possibility that there is a problem with the router settings, you need to restart the router, check whether the network cable interface of the router is loose, or reset the router wifi signal.

This answer applies to most models of Apple brand phones.

Dear, hello, I'm glad to answer for you, what is going on with the iPhone can't join the network Answer: The mobile phone is connected to wifi and shows that it can't join the network Possible reasons: 1

The router changed the wifi password, but the password saved by the phone's previous connection was not changed, causing the authentication to fail. 2.The router is abnormal, and the DHCP function is abnormal.

3.The cellular network settings are abnormal. Workaround:

1.Ignore the network or forget the network, re-enter the wifi password to connect. 2.

Restart your router. 3.Try restoring your cellular settings.

4.Try using a static IP address.

Hello, method.

1. If your iPhone is connected to the network and cannot join the WiFi situation, please check whether the password to connect to the WiFi is caused by the wrong input, if the password is wrong, then it must be unable to connect to the WiFi.

2. It is not a password problem, it may be an error in the iPhone system, it is recommended that you turn off the phone and restart it, and take a look at the connection to WiFi.

3. Or turn on the wireless wifi signal, ignore and remove the connected wifi signal, and then re-enter the password to verify the wifi signal.

4. After the above operation, the iPhone still can't connect to the wireless network signal, which means that it may be caused by a problem with the router settings, so the next thing is to restart it, and check whether the network cable interface of the router is loose, or reset the router wifi signal.

5. If the wifi still can't connect normally after setting, you can enter the iPhone restore page, click to reset the network settings, and then try to connect to the wifi wireless network.

6. If the above methods can't solve the problem of iPhone connecting to wifi, we can also try to update the phone system, or restore the factory settings of the phone, and then see if it can solve the problem.

iPhone won't join the network is caused by the wrong network settings, the solution is:

1. First find the settings on our mobile desktop and click on it, as shown in the picture below.

2. Next, you need to click General, as shown in the figure below.

3. Next, you need to click Restore, as shown in the figure below.

4. Then click Reset Network Settings as shown in the image below.

Generally, it's not a problem with the phone, it's a problem with wifi settings, of course, you can restore the mobile phone network or so, then you can determine the reason for the router, if it's someone else's network, then it's set up that others can't join.

The mobile phone card is not on, or the network card is broken.

The iPhone cannot join the network for the following reasons:

iPhone won't join the network is caused by the wrong network settings.

1. When connected to a wireless network:

Open the "Settings" app on your phone's screen, tap to open the "Cellular" column in the settings list, and then turn on the switch for cellular data, which can also be turned on if you support 3G networks.

2. If you can't connect to the wireless network:

Find the "General" column in the settings list, click to enter, and find the "Restore" column at the bottom of the general list, click to enter. Then click on the "Reset Network Settings" option.

If you have set a password for access restrictions, you need to enter the password, and finally click "Reset Network Settings" at the bottom. Try to reconnect to the network in the future to see if it works. If you still can't access the Internet after turning on the mobile network, you can try to turn off the phone and turn it on again.

Please press and hold the power button on the top of your phone until the power off option appears, then slide to power off.

How to turn on Personal Hotspot:

Go to Settings > Cellular, tap Personal Hotspot, then tap the slider to turn it on.

If you can't turn on Personal Hotspot:

1. Restart the device, and then turn on the "High-altitude Sensitive Hotspot" to see if it can be used. Qi Zhi.

2. If the restart doesn't work, go to "Settings" - "General" - "Reset" and tap "Reset Network Settings".

Note that this will erase the network information that has already been saved, such as WiFi and WiFi passwords. After the cleanup is complete, users can try turning the Personal Hotspot back on.

The Wi-Fi connection at home or in the dormitory must have a password, and then the wireless password in the dormitory is cracked or occupied by multiple people, resulting in a very headache for your network speed to be sluggish. At this time, the most convenient way to think of is to change the Wi-Fi password, but after the change, the device keeps showing a connection error and cannot join the network, how to change the connection password?

1. Go to Settings >> Wireless LAN, find the wireless network you need to connect to, and click the "i" help icon circled in blue at the back.

2. Click "Ignore this network", and the pop-up prompt box will click to confirm.

3. Click "Join Network" again, enter the updated password, and click "Join". If you still can't join, turn off Wi-Fi and re-enter the correct password to connect.

PS: If you encounter other network problems and cannot connect, you can go to Settings > General > Restore > Restore to restore the network settings, confirm the restore and check whether the network problem can be solved.

What's going on with Apple not being able to join the wireless network.

There are 3 reasons why Apple can't join the wireless network.

1. The password for connecting to the wireless network is incorrect.

2. On the premise of confirming that the password is not incorrect, it may be that the network cable interface of the router is loose.

3. On the premise of confirming that it is not the situation in 1 and 2, it may be that the system of the Apple mobile phone itself is wrong.

Let's take a look at how to solve this situation, the password is correct, but all wireless networks can't join! Like this case, basically the wifi is broken, how to fix it?