CE marking of CE marking, CE marking size and size requirements

The "CE" mark is a safety mark of conformity and is considered a passport for the manufacturer to open and enter the European market. In the EU market, the "CE" mark is a mandatory certification mark, whether it is a product produced by enterprises within the European Union, or a product produced in other countries, in order to circulate freely in the EU market, it must be affixed with the "CE" mark, in order to indicate that the product meets a series of basic requirements of a series of EU directives such as safety, health, environmental protection and consumer protection. This is a mandatory requirement for products under EU law.

According to different products, testing according to the corresponding CE directives, the certificate obtained by the product that has passed the testing and certification can be called CE certificate in a broad sense. (Different products are subject to different certification directives).

1) CE standard size.

For CE marking.

The height of the CE word should be at least 5mm, and the total length of the CE word should not exceed 12mm, and the width of the CE font should not be less than 1/5. The thickness should be at least 1 5 of the height (at least 20 1 5 4mm here), the outer radius should be 10mm, and the inner transverse column should be at least 80 (10) of the outer radius.

2) CE standard size scaling.

3) The severity of the CE standard size problem.

Since the beginning of the implementation of the product CE mark in Europe, there has been a strict trend in the implementation, but when domestic manufacturers print the CE mark on the product or packaging, it is not completely in accordance with the relevant size regulations.

4) CE standard ruler scale is a special case.

If the CE mark cannot be affixed directly to the product, it can also be affixed to the packaging next to the product or to the accompanying documents of the product, provided that the reason why the CE mark cannot be affixed to the product must be proved.

The minimum height of CE shall not be less than 5mm, and the total height of the trash can shall not be less than 7mm.

Legal Analysis: The "CE" mark is a mark of safety certification and is considered as a passport for the manufacturer to open and enter the European market. Generally, products with the "CE" mark can be sold in EU member states without meeting the requirements of each member state, thus realizing the free circulation of goods within EU member states.

Legal basis: "Product Quality Law of the People's Republic of China" Article 1 This Law is formulated in order to strengthen the supervision and management of product quality, improve the level of product quality, clarify the responsibility for product quality, protect the legitimate rights and interests of consumers, and maintain social and economic order.

CE certification, i.e. limited to the basic safety requirements in terms of products that do not endanger the safety of humans, animals and goods, rather than general quality requirements, the Harmonized Directive only stipulates the main requirements, and the general directive requirements are standard tasks. Therefore, the precise meaning is: the CE mark is a safety mark and not a quality mark.

It forms the core of the European directive"Main requirements:"。

The "CE" mark is a safety certification mark that is considered as a passport for manufacturers to open and enter the European market. CE stands for European Unity (Conformite Europeenne).

In the EU market, the "CE" mark is a mandatory certification mark, whether it is a product produced by an enterprise within the European Union, or a product produced in other countries, if it wants to circulate freely in the EU market, it must be affixed with the "CE" mark to indicate that the product meets the basic requirements of the EU "New Approach to Technology Harmonization and Standardization" directive. This is a mandatory requirement for products under EU law.

The significance of the CE mark is that it means that the product affixed with the CE mark has passed the corresponding conformity assessment procedure or the manufacturer's declaration of conformity, complies with the relevant EU directives, and is allowed to enter the European Community market as a sales pass. The relevant directives require that the industrial products affixed with the CE mark shall not be sold without the CE mark, and the products that have been affixed to the CE mark to enter the market shall be ordered to withdraw from the market if they are found not to meet the safety requirements, and those who continue to violate the provisions of the relevant CE mark of the directive will be restricted or prohibited from entering the EU market or forced to withdraw from the market.

The CE mark is not a quality mark, it is a mark that represents that the product has complied with a series of European standards and directives for safety, health, environmental protection and hygiene. All products sold in the EU are subject to the mandatory CE marking.

Since 1990, the European market began to implement the CE marking of toy products, and there is a strict trend in the implementation, but when domestic toy manufacturers print the CE mark on their products or packaging, they are not completely made in accordance with the relevant size regulations, and the Council will hereby call on domestic manufacturers to pay attention to the CE mark on the toy, the product name, the trademark, the address of the European market ** person and the supplier, must be in an obvious and easy-to-read style, pasted or printed on the toy body or other packaging, if the toy is too small, or is a toy composed of small partsThe European market has packaging regulations for the size of the CE mark, in which the height of the CE word should be at least 5mm, and the total length of the CE word shall not exceed 12mm, and the width of the CE font shall not be less than 1/5. The thickness should be at least 1 5 of the height (at least 20 1 5 = 4mm) as shown in the figure, the outer radius is 10mm, and the inner transverse column must be at least 80% of the outer radius (10 The figure is a demonstration of the CE standard with a height of 2 cm, and the content of the label should include warnings and precautions printed in the local market text. The name, trademark and address of the manufacturer or authorized merchant, or purchaser.

Comply with the requirements of CE.

CE mark is a mandatory mark, which is a product mark promoted by the European Union - referred to as the European Union. It is a new approach to the European Union's directive on technical harmonization and standards to certify that a product meets the essential requirements set out in the directive. Inform consumers which products meet the basic requirements in terms of safety, health and environment, so it is also known as the CE conformity mark and is the European Community"In addition, CE also conforms to the meaning of European conformity, so CE was chosen as the product mark of the European Union.

CE mark - the "passport" to open the European marketRegardless of whether the products produced by enterprises within the EU or in third countries are to circulate freely in the EU market, they must be marked with the "CE" mark. The "CE" mark is regarded as the manufacturer's "passport" to open the European market, and all products with the "CE" mark can be sold in EU member states without meeting the requirements of each member state, thus realizing the free circulation of goods.

CE Marking & Product Liability. In fact, the CE mark is only a declaration by the manufacturer, to the market inspector of the authorities and to the merchant of the product, and not to the consumer. The mark only indicates that the manufacturer has assessed that the product meets the relevant requirements to enable the product to circulate freely throughout the EU, and does not indicate the quality of the product or its safety for the surrounding environment.

In order for manufacturers to avoid risk liability, the most effective way is to conduct an inspection and issue an inspection report through a third-party certification body.

Welcome to inquire.

In order to eliminate the best barriers, the EU countries have uniformly implemented CE certification, CE is the EU mandatory safety certification, only through the CE certification of products can be free in the European market, otherwise should not be allowed to enter the EU market, can not pass the customs.

CE is a European certification mark.

It is a compulsory certification and the mark is CE. As long as the product circulates in the EU market, it must pass the CE certification, and the product is affixed with the CE mark to call the celery.

CE certification is a mandatory standard for all regret wheel products listed in the European market, including the popular protective products sent to Europe by many companies now, must first obtain CE recognition and completion certificate, CE certification is equivalent to a passport for products to enter Europe.

CE certification is a compulsory certification of the European Union, CE is the French "European Community European Conformity" abbreviation, CE certification is a safety mark, whether it is produced in EU member states or other non-member products must be affixed with the CE mark in order to be sold in the EU market. Products sold to Europe are considered unsafe or illegal if they do not comply with the CE certification or do not have the CE marking affixed. Products will not be allowed to enter any EU member state, and if they are found to be non-CE marked, the products face serious consequences of being expelled from the European market.