Why is the company s router always disconnected, and the router is always disconnected, what is goin

According to your situation, it should be the possibility of a problem with the line, the DSL or Link light on the broadband cat indicates the communication status between your broadband cat and the operator's equipment room, it should be always bright at normal times, if it is not bright or flashing, the biggest possibility is that there is a problem with your **line, directly call the operator's customer service** to report the obstacle and let people check and repair: Telecom 10000 Netcom 10060 You can also use the router and connect the computer directly to the broadband cat to test whether the line is disconnected.

First of all, it is not right for the telecom staff to attribute the problem to DHCP, and several other people are not entirely correct in answering the DHCP question. Telecom personnel can determine whether there is a problem with the line through instrument measurement. But if the line is fine, it is said that it is a problem with the router DHCP setting, which makes no sense.

DHCP is responsible for the dynamic allocation of IP addresses, and if there is a problem with the DHCP setting, the terminal (mobile phone or computer can be collectively referred to as the terminal) device cannot obtain the correct IP address, which will lead to the inability to access the Internet. But it's not that you can't get on all the time, it's that "it will automatically disconnect every once in a while", and it's good to restart the route. This shows that there is no problem with DHCP.

Inside the parentheses is an explanation of the technical point: because those who are familiar with DHCP should know that DHCP allocates IP addresses according to a pool of IP addresses, and this address has a lease period. Generally, home users come to a few terminals, and there is no insufficient allocation of IP addresses, even if the lease period is exceeded, it is still allocated according to the original address.

So what's the problem? We recommend that you perform the following steps:

1. When you can access the Internet, see what the correct IP address and DNS are. When you can't access the Internet, check again, if the IP address is wrong, it means that the computer has not obtained the IP address correctly. This may be related to DHCP, but it cannot be said to be a DHCP problem, such as a faulty network card or slow network speed, which may also cause the IP address to not be obtained correctly.

2. If the IP address is correct but the DNS is not obtained or the DNS is incorrect, it is a problem with the DNS (there are many such cases). At this time, although you can't access the Internet correctly, you should be able to get on QQ.

The best way to solve the above two problems is to manually set the IP address and DNS.

3. Poor contact: whether the connection between the network cable and the router and the computer network card is normal. When you can't access the Internet, check to see if there is a prompt that the network connection is disconnected.

Is there a network icon in the lower right corner, and will the network icon be disconnected). This situation is relatively rare, but some difficult phenomena are often caused by these rare factors.

If you have changed routers, it is likely that it is the reason for the network card or network cable.

It is recommended to replace the network cable to try, if it still does not work, you can use anhydrous alcohol to clean the RJ45 plug at both ends of the network cable and the RJ45 socket of the network card when the computer is turned off.

Check whether the network cable of the WAN interface of the router is loose or poorly contacted, and try to replace a network cable and check again.

Try changing the Wi-Fi name and password of your router and setting a more complex Wi-Fi password to improve the security of your Wi-Fi network and avoid being unstable due to network traffic.

Try upgrading your router to the latest software version.

Please check whether the broadband operator's network is stable: remove the router, directly connect the computer and the Internet (such as broadband modem and optical modem) with a network cable, and verify whether you can dial up the Internet through a single computer.

If the Wi-Fi signal is weak, try adjusting the location of your router. Choose an open space to reduce the barriers between the router and Internet devices, such as concrete walls and wooden walls, which will affect the Wi-Fi signal transmission effect.

If the house is too big and the Wi-Fi signal is weak in some places, you can try to use the router with Power Cat and Wi-Fi signal amplifier to achieve Wi-Fi for the whole house

What brand of router is your router? Also, is your router set up to automatically assign DHCP? Can't connect to it wirelessly?

Or can't you connect to the wired one? If, in order to determine whether there is a problem with the router, you can change a router or directly use the cat to connect to a computer to determine whether it is a problem.

You open a window and ping the gateway continuously to see if there is a disconnection to know if it is a DHCP problem. Generally, the line is unstable or the router is unstable, and the home router sometimes has to be restarted, and the line is unstable and can only be detected by the operator.

That's your wireless router crashed, working for a little time, that's it, it is recommended that you change to a better one. If it can't be carried, it will freeze and not work.

I can tell the landlord with certainty that there are only two possibilities:

1. The port given to you by telecommunications or Netcom is old and cannot be used;

2. There is a problem with the line of telecommunications or Netcom;

Third, the problem of the router.

Test Method: You remove the router, dial up the Internet directly, see if the connection drops, if it continues to drop, it is a problem with the telecom or Netcom line and port, if it does not drop, it is a problem with your router.

Resolution. The problem of the router can only be replaced or repaired;

If you have a problem with the line of telecommunications or Netcom, you can call the service provider's ** to report for repair and ask for on-site maintenance, which can be solved in about 2 days.

Hello friend.

First of all, I don't know what your route looks like.

If it is a router setting issue, then it is recommended that you go to the router settings first. Then revert to factory settings.

Then connect it to see if there is a problem.

Hope it helps.

I have encountered the same problem I also bought a good router at the beginning But the problem is still there, it is better to let Telecom change a cat , (we are three families) now the cat can bring two computers If you bring two even the router is used It is recommended that you let Telecom change a cat for you.

Is it not set up in the route?,There's an option to connect on demand and connect all the time.。

If the disconnection frequency is too high, it is recommended to change to a better router. Disconnection is a common problem of routers, and it should not be a setup problem.