Onda P31S What should I do if I don t have a CPU voltage option The manual was lost

If you want to overclock, first boot up the computer and press the Del button to enter the BIOS settings screen of the motherboard. Select Soft Menu III Setup from the BIOS, which is the SoftMenu overclocking function of the Ascend Motherboard. Take the AMD1800+ as an example.

After entering the function, we can see that the system automatically recognizes the CPU as 1800+. We're going to press enter here and change the default recognized model to user define mode. After setting to manual mode, the CPU external frequency and frequency multiplier that were not selectable in gray are now optional.

If you need to overclock with boost external clock, press enter at external clock:133MHz. There's a lot of external frequency to adjust, and you can tune it to a 150MHz or higher frequency option.

Because increasing the external frequency will increase the frequency of the system bus and affect the stability of other equipment, the method of locking the PCI frequency must be adopted.

One of the multiplier factors is to adjust the CPU frequency multiplier, enter the options area after entering, and you can select the frequency multiplier according to the actual situation of the CPU, for example5 or higher octave.

The core voltage of the CPU can be set and adjusted in the BIOS, and the default state can be selected under normal circumstances. If the system is unstable after the CPU is overclocked, you can add voltage to the CPU cores. However, the increase in voltage is very large, first of all, the CPU heat will increase, and secondly, the voltage is too high and it is easy to burn the CPU, so you must be cautious when adding voltage, generally you can add it up or step up.

The pressure is extremely unstable, it is easy to burn the CPU, he burned it all at once, about 2 seconds, the experience of blood, a plop of rice, remember to remember.

If you don't, you don't have it, what do you want voltage options for?

Overclocking? Overclocking is generally silent, and it is easy to burn you when adding voltage

Hehe, it seems that you are quite powerful, write your own BIOS with assembly, or change the circuit, and add voltage directly to the CPU

Don't ask me how to change it, you know.

The voltage of the north and south bridges is the CPU voltage.

The voltage speed is affected by the environment.

Oh, no, it's that simple, ok, it's a long story, I'm dizzy.

This may be a software problem, but it must be accurate in the BIOS.

The voltage of the CPU must be left and right, otherwise it will definitely not start.

Hehe, mine also often gets back up.

But it's only a day and it's acceptable.

I don't understand why Tualtin's is more stable than it feels.

It seems that CPU-Z can't read the SPD information on your memory module? Take a look at it.

Update the version of CPUZ, or update the BIOS

Boot into BIOS->Advanced and find the following options: set Mode one by one (the meaning of overclocking mode) - > select [Async] (the meaning of asynchronous overclocking) Frequency press + on the keyboard to adjust to 220, this is the external frequency, the default is 200spectrum (the meaning of extended frequency) Set it to Autofailure Guard (Boot failure recovery) Set it to Enabled'n'quiet is set to disabled

change (the meaning of voltage change) is set to manual (the meaning of manual) frequency multiplier (northbridge frequency multiplier) northbridge frequency = outer frequency * northbridge frequency multiplier, we generally make the northbridge frequency and ht bus frequency equal, each motherboard supports the ht bus frequency is different, my motherboard supports a maximum of 2600 ht bus frequency, so I set this option to 9x, so that the northbridge frequency becomes 250*9=2250, within the safe and stable range.

Bus Speed (HT bus frequency) is set to 9x to 2250clock (meaning memory frequency) is set to [667 MHz DDR3 1333].

10.Press F10 to save and restart.

Are you talking about a performance boost that means overclocking? Overclocking means that his performance has improved, and as the performance improves, the power consumption will definitely be slightly more expensive than not exceeding. Have you ever seen a supermarket that didn't pay for anything?

I still want to be beautiful and don't want to pay, there's no such thing, if you feel that your power supply is not enough, the premise is to buy a power supply first!!

Overclocking,But the actual meaning is not much,My previous computer was a black box 5000+ can be overclocked to normal use by default voltage,And there is not much difference at all,Your u default frequency,Overclocking at most on the default voltage,There is no meaning。

No, if the U slot of Onda K8T800 is socket 754, it will not work, and the interface of AM2 is socket 940, the easiest way to distinguish is to remove the U to see if there is a square gap in the middle of the U socket, if there is, it does not support the U of am2, and can only use the sempron or athlon 64 of the socket 754 interface, which is the easiest way to distinguish am2 from socket 754.

It is only compatible with the 754's Sepron and Athlon's 64.

Hope you are satisfied.

865 motherboard, do you still want to overclock? Isn't your current u 200 external frequency?

Does power failure have anything to do with CPU voltage? The temperature is high or how most U bucks will be unstable.

If it is restarted frequently or automatically shut down, it must be the cause of the power supply.

The CPU of the machine motherboard is relatively old, and it belongs to the 07 years of stupid guessing.

A card 3670 is enough, 4670 is high, and the performance can't be played.

The N-card 8600GT can't play the role of the 9 series graphics card with the accomplice cover, which is a waste of resources.

Go to the forum of this motherboard to take a look, it is estimated that even the Celeron 420 cannot be used, because the motherboard that fails to use the Celeron 420 can basically use the Core series, which is still a 945 motherboard.

Is it voltage regulation overclocking?

Onda's board, or don't be super good! I can't resist it!

How much does it cost to integrate HD4200 If A78G adds a separate display, will it be much better than replacing it with 880G? Motherboard Change, 780G motherboard integrates 3200 chips (this integrated display performance is still.

As long as it is an AM2 interface CPU, it can adjust the voltage and external frequency, but the current motherboard cannot be adjusted.

The section doubling bar can only adjust the external frequency