-
Anonymous users2024-02-05It should be a machine issue. The machine you're playing on this game may not be able to handle as many games. Try it on a different machine.
-
Anonymous users2024-02-04Is it a machine card or a game card?
The machine card is a memory problem, this can be tried with a memory module.
The game card is the problem of network resources, that is, the problem of traffic, so I don't need to talk about it later.
-
Anonymous users2024-02-03The card is not necessarily a problem with the network speed, computer problems can also affect it, for example, if you open so much, your CPU, graphics card memory or something exceeds the compound, the computer begins to stuck! It doesn't have to be an internet speed card!
-
Anonymous users2024-02-02What game do you play, a computer can open 24 numbers? Fantasy Journey to the West? Of course, the game is more open.
accounts for the speed of the Internet. You can try to turn on an accelerator on the main machine, and I won't get stuck when I open the game. And play the game card also depends on what game you play, 3D games, you don't want to open 24, you open 4 you may not understand the card, unless you have a top-level configuration,
-
Anonymous users2024-02-01How much do you see your PF use? If you use too much, it will be overloaded, and your network speed should be fine, but the computer's running space is occupied by your games, so the running speed is full, so it will be stuck! But after you turn off a few games, you have more room to run and your computer won't run too much, so the internet speed will naturally be better.
-
Anonymous users2024-01-31Based on the information you provide, the following speculations can be made:
When A sends a frame to E, bridges B1 and B2 in the topology diagram do the following:
After B1 receives the frame sent by A, it checks the target MAC address and sends the frame ** to the mode-free interface connected to E, because the MAC address of E is on the network segment corresponding to the interface to which B1 bends and connects.
B2 also receives the frame sent by A, checks the target MAC address, and sends the frame to the interface connected to E, because E's MAC address is on the network segment of the interface to which B2 is connected.
When E sends a response frame to A, B1 and B2 will do the following:
The response frame sent by E arrives at B2, and B2 checks the target MAC address and sends the frame ** to the interface connected to A, because the MAC address of embedded as A is located on the network segment corresponding to the interface to which B2 is connected.
B1 receives the response frame sent by E, checks the destination MAC address, and sends the frame to the interface connected to A, because A's MAC address is on the network segment of the interface to which B1 is connected.
When A sends a dataframe to H, bridges B1 and B2 in the topology diagram do the following:
After B1 receives the data frame sent by A, it checks the destination MAC address and sends the frame ** to the interface connected to H, because the MAC address of H is on the network segment corresponding to the interface to which B1 is connected.
B2 also receives the data frame sent by A, checks the destination MAC address, and sends the frame ** to the interface connected to H, because the MAC address of H is on the network segment corresponding to the interface to which B2 is connected.
It's important to note that bridges make frame decisions based on MAC address tables, which are dynamically updated based on traffic in the network to keep the network up and running. The above action assumes that the bridge has learned the corresponding MAC address information, and that the table already contains the correct ** information. If there is no corresponding information in the MAC address table, the bridge may broadcast or flood to send frames to all interfaces until the corresponding MAC address information is learned.
In fact, it's very simple, don't be so troublesome, if you change the network environment, directly delete all the connection methods of the network connection, let the wireless network automatically find a new connection, it will definitely find the connection of your wireless route (here does not rule out that your neighbors have wireless routes, if there is a possibility to find several connections), but this premise is that your wireless route must be set up. >>>More
If you confirm that it is not a virus problem, you can see whether the data in the DNS option under the IP protocol is correct, if the MAC address can not be seen, you can consider reinstalling the network card, if you do not want to reinstall the network card, you can first disable the network card and then restart the machine, and then enable the network card. If this still doesn't work, you can use 360 or software tests such as Optimizer and Master Lu to fix it.
Hardware failure, you have to talk about what the alarm sound looks like first. >>>More
How do I check the speed of my computerHow do I check the speed of my network? In the start menu, after finding Run, enter ping -t in the running window, and look at the time value from the window, generally time<300ms is considered the normal value; If the time > 300ms, the network is busy. >>>More
I looked it up, and I was depressed and looked at it myself. The SF tracking number on their online 106631974085 is indeed Mr. Wang of Tangshan City, but I checked the Huaying mobile phone network on the Internet, and I also used this tracking number to send Xinyuan Technology to Mr. Wang of Tangshan City, and it is the same, and this computer network is similar to the network, and it is also this tracking number. >>>More