Why does the network disconnect during standby?

When standby, the mobile phone generally automatically turns on the energy-saving mode, so the network will be disconnected.

In the network connection, you can set the automatic disconnection when it is not in use

Standby refers to the intermediate state of an energy-efficient, dependent system.

Standby is to save the data that is currently running in the memory, and the machine only supplies power to the memory, while parts such as hard disks, screens, and CPUs stop supplying power.

When the system is standby, in order to prevent the computer from being woken up and the battery is consumed at an inappropriate time, the network card will be automatically shut down.

If you don't want to turn off the network card while on standby, you can do it by following this step:

Right-click Neighbor on the Net - Properties - Right-click Local Connection - Properties - Configuration - Power Management - Remove both checks, just "Allow the computer to turn off this device to save power" and "Allow this device to take the computer out of standby".

Finally, it is recommended that you follow the default settings of the system, and it is not recommended to modify the settings.

When our phone goes into standby, the network is automatically disconnected. Then you have to go to the phone's settings to cancel this, first, click to enter the phone's [Settings] function.

Click the Wi-Fi function in Settings.

Go to [WLAN], click the function module in the lower right corner, and find [Advanced] inside.

Go to the [Advanced] settings page, there is a [Keep Wi-Fi connection in hibernation state], click to enter.

You'll see three options to choose from. We choose Always. That's it.

Different phones may have different interfaces and locations, but the method is the same. If there is a standby network disconnection, it can be solved by following the above settings.

If the phone is in standby mode, disconnect from the network. Mobile data can be disabled, and that's it.

The reasons why the computer will automatically disconnect from the network after a long standby time may be as follows:

1.Energy saving settings: To conserve power, your computer may go into standby or hibernation after a period of idleness. In this case, the network connection is also disconnected to avoid wasting power.

3.Battery saver settings: Some computer systems may have specific battery saver settings that include the option to disconnect from the network. This reduces your computer's power consumption and extends battery life.

4.Update or Restart: The computer may need to be updated or restarted while the computer is being destroyed. To avoid problems during the update or reboot process, the computer will automatically disconnect from the network after a long standby standby interval.

If you're looking to fix this, you can check your PC's power management settings to make sure your network connection remains active in standby.

After your computer goes into standby mode, your network connection is also affected. The computer automatically disconnects from the Internet to reduce the power consumption of the computer from network activities. As a result, your computer's network adapter will shut down, making it impossible to access the internet.

In addition, some operating systems automatically disconnect from the network after a period of standby time. This is to protect the security and privacy of your computer. In standby mode, your computer may become more vulnerable to cyberattacks.

Therefore, to reduce the potential risk of dust keys, the operating system automatically disconnects from the network.

In addition, some computer hardware and software may cause the computer to automatically disconnect after a long standby time. For example, some network adapters may automatically shut down after standby to reduce power consumption. In addition, some network management software may also automatically disconnect the network connection after the computer enters standby mode to protect the security of the computer.

There are many ways to solve this problem. First, you can adjust your computer's standby settings, extend the standby time, or disable the automatic network disconnect feature. This way, the computer won't automatically disconnect from the network after a period of standby.

In addition, you can also solve this problem by changing the power management settings of your computer. You can disable the ability for your computer to turn off your network adapter in standby mode so that you can keep your network connection stable.

You can also update your computer's drivers and manipulation system to troubleshoot issues related to your network connection. Sometimes, old drivers and operating systems can cause your computer to automatically disconnect after a period of standby.

In general, the computer will automatically disconnect from the network after a long standby time to save power and protect the security of the computer. However, this issue can be fixed by adjusting standby settings, changing power management settings, and updating drivers.