The colored light on the mechanical keyboard is not lit, and I don t know which one to hold

What should I do if the computer keyboard indicator does not light up.

What to do if the computer keyboard indicator light is not lit Usually the computer keyboard indicator is not lit, in most cases it is not caused by hardware damage, but due to not pressing the corresponding key, the three indicators on the keyboard correspond to the three modes of the keyboard, when the corresponding key is pressed, it will light up, and the keys of the control indicator are the caps lock in the main keyboard area and the num lock in the keypad area and the scroll lock in the area (in order of the indicator from left to right).

If the keyboard indicator is not lit because the corresponding key was not pressed, then it could be something else. First of all, please make sure that the computer keyboard cable has been connected to the computer motherboard interface normally, and then confirm whether the computer's motherboard and interface are damaged, or whether the connection cable is broken.

If you are sure that all the interfaces are fine, then try pressing the button corresponding to the keyboard light to see if it works, such as caps lock

key, numlock key, and scroll lock key.

If the above methods still do not work, then it is very likely that your keyboard indicator has been damaged, if it does not interfere with your use, it is recommended to continue using it or replace it with a new one.

How to turn the computer keyboard indicator on and off.

The first light generally means the "numlock" key, which represents the numeric keypad key. Generally, it will light up automatically when the computer is turned on. When this light is on, if you need to enter numbers, you can enter them directly from the numeric keypad.

If the light is not on, then pressing the number key of the numeric keypad will not respond, which is generally on top of the number key 7.

The second light I believe knows a little common sense about computers. It is a letter case toggle key, and it means holding caps lock, which means uppercase lock. This key is to the left of the letter A.

That is, above the shift key. Press and hold the key to light up the second light. At the same time, when you enter the letters, it is a capital letter.

If there is no light, it is lowercase.

The third light is not very well known to many users, and its general use is not very large. Then the way to turn on and off the indicator is the "scrolllock" key, which is sometimes referred to as scroll. It is the second key on the right side of F12, if the light is lit, it means that the scroll key lock is turned on, and when you press the up and down keys to scroll in excel and so on, it will lock the cursor and scroll the page.

If you let go of this key, pressing the up and down keys scrolls the cursor instead of scrolling the page. But basically, if you don't need it, you just need to understand.

The colored light on the mechanical keyboard is not lit, and I don't know which one to holdFN KEY: Light Mode Key! Earlier, Razer used the light sense touch to control the light mode, but now it should be gone, because the light was simple at that time, there were not so many bells and whistles and modes, and now there are too many light colors, most of them use the function key (fn) key on the mechanical keyboard plus other keys to control the light color, brightness, and mode!

The so-called mode is office, game or customization, etc., start the corresponding mode, and the corresponding commonly used key lights will be highlighted! (ps: The fn key that comes with the notebook and the fn key on the keyboard have overlapping functions, but most of them do not coincide, the fn key function on the keyboard is mainly for the function on the keyboard, and the fn key of the notebook comes with the keyboard and is the same when the keyboard is not connected)!

The light control key combination of the mechanical keyboard is generally the one on the top of the up, down, left, right and arrow keys on the keyboard (the area of Delele), and each key corresponds to a light mode!

Is there a **? The manual generally has how to adjust the light, or you look for a button on the keyboard to draw a small sun, or you try to press the keys above the arrow keys, try the PRTSC keys, some may still be a combination of keys, not the same, it is recommended that you still explain your model or take a ** to the peripherals world forum to ask

Hello, the computer mechanical keyboard light is not a means that the keyboard must be normal, sometimes the key contact is poor, the panel desoldering and other problems will make the keyboard keys not respond, such as the solder joint of the mechanical keyboard will have the problem of desoldering, if a key just encounters this situation, then it will fail, but normally a better machine world will not encounter this kind of problem, poor quality may appear desoldering, you need to disassemble the keyboard to view the trillion cavity, the solder joint maintenance.

The driver problem is very simple, you only need to prepare the keyboard driver first, then uninstall the original driver of the keyboard, and then install the new driver according to the prompts.

If the computer system has been updated recently, after the update is restarted, the keyboard only appears that the keys do not work, you can turn on and hold F8 without total hands, select the family shirt "the latest correct configuration" and press the enter key to repair. Exiting safe mode and restarting the computer will automatically fix it. If the keyboard still fails, we can restore the system to a time when there was no keyboard failure.

There are many reasons why the keys of the mechanical keyboard do not work, and you need to check the physical object to confirm the reason, it is recommended that if you do not have experience in keyboard maintenance, you should honestly take the keyboard to the maintenance point for maintenance, don't waste your own time.

1. Press the button of the mechanical keyboard like a small sun, turn on the breathing light of the mechanical keyboard, and put it between the [FN] key and the [CTRL] key.

2. After pressing it, the mechanical keyboard will light up.

3. After the light is turned on, after pressing the breathing light switch, the mechanical keyboard will light up with other colors.

4. After pressing the breathing light switch, the keyboard will also light up with different colors of keyboard lights.

This article is based on the Logitech G610ORION brand.

2108s I don't have it at hand,The V800 light change I have at hand is to directly press a light button in the upper right corner,Generally, the lights of the keyboard are the following modes,If it's a direct key,If it's not a combination of keys,You see if there's an fn key near the space,Use the fn key plus the top row of lights like the key。 Something like this.

The computer keyboard indicator does not light up

The three indicators on the keyboard correspond to the three modes of the keyboard, namely Caps Lock in the main keyboard area, Num Lock in the keypad area, and Scroll Lock in the area, which will light up when the corresponding key is pressed.

1. Caps Lock is an English case conversion switch, press this button indicator light will be on, the input English will appear in uppercase, the light will go off after pressing it again, English returns to lowercase, which is the most commonly used one.

2. Num Lock is the key needed to enter some passwords, and the number keys in the keypad area can smoothly output the corresponding numbers when pressing and lighting up the indicator light.

3. The scroll lock key is basically useless, and it is only used when carrying out **. When performing Excel, the user uses the arrow keys to scroll, and the cursor will move with the page, and when the scroll lock key is pressed to move again, the page scrolls as usual, and the cursor stays in place.