thinkpad E540 boot shows 0183 bad crc of security settings in EF1 variable what s the problem

Updated on number 2024-02-09
15 answers
  1. Anonymous users2024-02-05

    Press F1 to enter the BIOS to restore it and try it by default. If it doesn't work, you can basically determine that there is something wrong with the motherboard. The E540 is a new machine and is certainly still under warranty. Good luck.

  2. Anonymous users2024-02-04

    Dear Lenovo users, hello!

    It is a motherboard or hard disk error, it is recommended that you contact the Lenovo service center for testing, the specific address and contact of the service center**Please refer to the following link: (It is recommended that you contact the service center before going).

    IDEA Forum.

    Think Forum.

    Lenovo Community.

  3. Anonymous users2024-02-03

    Restart the computer When the ThinkPad logo appears, press F1 to enter the BIOS, press and hold F9 to restore the default settings of the BIOS, press and hold F10 to save and exit and then restart the computer.

  4. Anonymous users2024-02-02

    Restart the computer, when the ThinkPad logo appears, press F1 to enter the BIOS, press F9, initialize the BIOS, press F10, save and leave, and that's it!

  5. Anonymous users2024-02-01

    Because a track cannot accommodate n=6, it will format a bad crc and use a floppy drive to write data near the index hole correctly, so hardware copy tools such as copy cards cannot copy it, but if you still want to read the track, the disk will index the number of holes by the way.

  6. Anonymous users2024-01-31

    What do you use to install win7? Is it a USB flash drive or a CD? At what point does the error appear? Please explain it in more detail, so that we can help you judge and solve it.

  7. Anonymous users2024-01-30

    If you're sure your hard drive is fine, there may be a problem with the motherboard.

  8. Anonymous users2024-01-29

    After restarting, try again when the ThinkPad logo appears and press immediately to be fast.

  9. Anonymous users2024-01-28

    Is it a battery? Or is it not plugged in?

  10. Anonymous users2024-01-27

    。Press F1 to enter the BIOS to restore it and try it by default. If it doesn't work, you can basically determine that there is something wrong with the motherboard. If it is still under warranty, you can go to the after-sales maintenance point to detect and replace, generally 1-3 work, if there is goods on site, it can be replaced immediately. Good luck.

  11. Anonymous users2024-01-26

    Dear Lenovo users, hello!

    Press F1 to enter the BIOS interface, select Load Optimized Defaults to restore the default settings of the BIOS, and then press F12 to save and exit.

    IDEA Forum.

    Think Forum.

    Lenovo Community.

  12. Anonymous users2024-01-25

    This may be a problem with the settings in the CMOS, you can restore the default first, and if so, you can slowly change the settings in the CMOS to achieve the best performance.

  13. Anonymous users2024-01-24

    Dear Lenovo users, hello!

    Press F1 to enter the BIOS interface, select Load Optimized Defaults to restore the default settings of the BIOS, and then press F12 to save and exit.

    IDEA Forum.

    Think Forum.

    Lenovo Community.

  14. Anonymous users2024-01-23

    Dear Lenovo users, hello!

    You boot up, press F1 to enter the BIOS, press F9, select Yes, press F10 to save the settings, exit and restore the BIOS default settings.

    If this still doesn't work, you'll need to send it to a service station to have your motherboard repaired.

  15. Anonymous users2024-01-22

    Dear Lenovo users, it is recommended that you turn on the computer and press F2 to enter the one-click restore recovery system, if it cannot solve your problem, it is recommended that you go to the nearest service station for testing.

    IDEA Forum.

    Think Forum.

Related questions
17 answers2024-02-09

May I ask which model of yours is E420?,E420 is generally installed with a pre-installed genuine system,There is a Q disk in the computer above the computer,It is the backup of the system,So you don't need to back it up at all,As long as the Q disk is not destroyed,When you boot up,Press F11,Press the above prompts,You can restore to the previous home version。 Actually,There's no need to upgrade the computer to the flagship version.,You can't use more functions in it at all.,The computer is enough.,There's no need to chase the best system.,I'm using the home version.,I have my own key.,But I haven't upgraded.,You can enter the key in the windows anytime upgrade in the control panel to upgrade,Computer,Just use it.,The flagship version of the home version is the same! Hope it helps!

5 answers2024-02-09

i5-3230M GT740M 2G Graphics Card This graphics card is between GT640 and GT650 and can play 90% of the games on the market.

24 answers2024-02-09

The game can definitely run, but the current ThinkPad is not good in terms of hardware or software, and a Little Red Riding Hood is my favorite.

6 answers2024-02-09

ThinkPad E420, as long as 4000 or so, I'm using it, i3 processor, two G memory, the focus is on one G independent display, enough for study and work, and strong for games. As for the graphics processing power, all the game masterpieces are stress-free (of course, you are not asked to turn on full special effects, and some games have tens of thousands of machines with full special effects) Isn't Crysis 2 smooth enough? The built-in R&R backup is also very strong, ensuring the stability of the system, and overall, it is very cost-effective.

8 answers2024-02-09

You're talking about the model of the graphics card.,Please make it clear.,It's completely usable in the XP system.,The current graphics card is very powerful.,Play with the special effects of win7 is no problem.。 >>>More