What to do when the washing machine is displaced

Friend, this is simple, make a wooden base, do it according to the base of the washing machine, and when it is done, the washing machine will not be displaced when you put it on this base.

Strictly speaking, it is a washing machine quality problem! I've had this problem too. But it's okay to change to a smart control board!

Replacing the legs of the existing drum washing machine with the "extrusion rheology damper foot" can solve the problem of the drum washing machine's spin dry impact displacement, dancing, vibration wandering, violent vibration of the whole machine, and floor vibration. The product can be installed by the user himself, and the performance has passed the laboratory inspection of 7 drum washing machine factories, and the performance is remarkable. Suitable for barrel roller machine brand:

Haier, Panasonic, Whirlpool, Siemens, Duckling, Little Swan, Little Swan-GM, Samsung, Sanyo, Chunlan, LG, Midea, etc. When the user has any questions, he can buy it after searching for the baby "squeezing the rheological shock absorber foot" through **.com, and the loan will be released only after the use is satisfied.

Is it a washing machine displacement? Cushion something underneath and don't let it move.

It is best to place it on the feet of the machine with soft rubber

Hello, that's because when you are doing laundry, the washing machine is vibrating, and the vibration causes it to move. You can put a gasket under the washing machine, and it will be a little better.

When washing clothes, the washing machine moves, usually, because the washing machine is relatively noisy, and it is usually a phenomenon that occurs when it is spin dry.

Causes of large vibration and displacement of drum washing machine when spinning dry and repair methods:

1. Open the glass door and rotate the inner cylinder to see if there is a dry grinding sound when the bearing is short of oil.

2. Mention the inner cylinder, whether it feels like there is a relatively large gap between the two cylinders.

3. Whether the dehydration of the empty machine is also very loud, if so, it may be that the bearing or cross is broken. You can't fix it yourself, because you have to remove all the washing machines before you can replace them.

4. Open the upper cover to see if the hook spring is loose or broken.

5. In addition, is it the vibration caused by too much clothing or eccentricity.

Expand the information of the Disturbance Booth:Maintenance lubrication. In order to make the washing machine run normally and easily for a long time, it is necessary to carry out correct lubrication and maintenance on time, the main places that need to be lubricated are bearings and gears, and the bearings need to be injected with L-TSA22 anti-rust and anti-oxidation lubricating oil with good wear resistance and oxidation stability through the oil injection hole, and generally refueled once a year if used for general mechanical oil.

The gears should be lubricated with No. 2 extreme pressure lithium grease with good adhesion, or good oily potatoes with 1% alkyl dithiophosphate, or MOS2, L-CKC100 medium extreme pressure anti-wear gear oil with 3% mass content for lubrication. The bearings and gears of the spin dryer should be added with L-AN15 and L-AN68 lubricating oil with good oxidation, anti-rust and anti-wear properties every year or half a year. If a sealed rolling bearing is used, it should be sealed by the bearing factory with a service life of more than 1000 hours, polyurea-based thickened refined petroleum lubricating oil, and No. 2 grease with anti-rust and antioxidant added.

The old mobile washing machine of the drum washing machine indicates that the washing machine is faulty, and you can find a professional to repair it.

<> the displacement of the drum washing machine is solved skillfully: 1. Remove the back bolts, the drum washing machine is very noisy to use, and the machine vibrates violently when it is dried, which may be caused by not removing the fixing screws behind the drum. 2. Adjust the washing machine mat, the washing machine must be placed in a stable environment, and adjust the level of the washing machine to effectively reduce shaking.

This answer is suitable for most washing machine models of Haier EG10014B39GU1 &&& Little Swan TG100V88WMUIADY5 and other brands.

When many friends use the washing machine to spin, they find that the shaking is very strong, and they are suspected of the washing machine malfunctioning, but they don't know how to maintain it. Actually, this situation is not necessarily due to the broken washing machine, it is likely to be caused by other reasons, what is going on?

What are the reasons for the large shaking of the drum washing machine? The front-loading washing machine is not laid flat, or the clothes are not properly placed. It may be that the plastic sleeve between the brake wheel and the motor shaft of the drum washing machine dehydrator is seriously worn, and there is a gap between the brake wheel and the return shaft of the dehydration bucket, which is difficult to start.

The drum washing machine wobbles badly when it is dehydrated, which may be due to the suspension system. If the belt on the front-loading washing machine is too tight, causing the bucket to skew, it will make the spin wobbly a lot.

If we look closely at the bucket removed from the washing machine, we will find that it is shaking, and when it is stopped running, we will find that it can turn in four directions: forward, backward, left, and right, this is because there is a damping spring pulling it in all four directions of the washing machine drum, and the spring is loose or falling off, so this will happen when the washing machine is dehydrated.

For other faults, if the possibility of the above noise is ruled out, and the washing machine still has a loud sound, then it is necessary to find a maintenance master to repair it and find out the root cause of the problem, so as to better remedy it. Filial piety.

Solution: If the drum washing machine is not placed flat, you can adjust the base balance column to make it stable. If the clothes are uneven, you can take the method of washing less clothes and not too many clothes at once.

If there is a problem with the brake wheel and motor shaft of the dehydrator, you can contact the after-sales personnel of the washing machine to replace the brake wheel.

Although there are these two simple problems, there is also a more complicated situation, you must know that the engine driven by the washing machine is connected to the dewatering cylinder, because some washing machine units will give the engine an additional suspension spring and shock absorber, when the shock absorber hunger or spring problem occurs, it will be issued"Smack"sounds. If this happens, the individual is unable to repair, but you can remove the cover under the washing machine to confirm, if the warranty period has not passed, call the manufacturer's maintenance **, let it come to solve the problem.

Hello dear <>

How to move the drum washing machine is too heavy There are several ways to carry it. 1. Place the washing machine on the curved bottom bracket and push it away. 2. Fix the washing machine with a rope and stuff the liner into the anti-rat cover, so that there will be no shaking when loading and transporting.

3. Find a moving company to deal with the stove. The recovery belt is moved with the transport bolts, but when installing, the 4 bolts should be removed to avoid large vibrations when used in concealment. When the washing machine is moved, it should be handled gently, and it should not be dragged on the ground when loading, but should be lifted slightly before being carried, and foam liners should be placed on the edges.

Avoid large shaking. In addition, if you are transporting it on rainy days, you should also pay attention to rain prevention.

Summary. Hello, dear! What is the reason for the shift position of the washing machine when it is spinning, there are 1:

The washing machine itself is uneven when it is placed, that is, the 4 feet are not in the same plane, as long as the washing machine is washing or dehydrating, the washing machine will be displaced, especially when dehydration.

Hello, pro-luck mountain wheel cheats! What is the reason for the moving position of the washing machine when it is dehydrated: there is an unevenness when the washing machine itself is placed in the side tung, that is, the 4 feet are not in the same plane, as long as the washing machine is washing or dehydrating, the washing machine will be displaced, especially when the dehydration is more serious.

2: The amount of laundry in the washing tube is more, or large clothes such as coats, **, etc., when the water level is not added enough during cleaning, so the water front clothes can not be well balanced, and naturally there will be deviations in the glue link--- the centrifugal force will be uneven, and the washing machine will naturally shake and shift. The washing machine is generally placed in a flat position, so rest assured.

When the drum washing machine encounters uneven ground or uneven placement of clothes, it is easy to vibrate, and the machine will be displaced in serious cases.

You can refer to the above reasons, if you still move after adjustment, it is recommended that you call after-sales service** consultation.

I have used the Panasonic drum washing machine for 5 years, the corners are flat, the dust of the tripod cavity is not broken, the spring hook is normal, the old Zen shock absorption is intact, and the belt is a little round brother loose, it is estimated that what is the cause of the vibration displacement.

1.Possible motor failure 2The shaft drives the bushing to form friction between the sleeve and the sleeve pressing. 3.Capacitor failure.

In these cases, it is recommended that you contact the repair shop maintenance master to help you repair.

The washing machine moves when washing clothes, and the reasons for this are as follows:

1. The foot of the washing machine is not leveled, and the foot is unstable, resulting in the swing displacement of the liquid and the washing machine during the washing process;

2. Too many clothes are put into the washing machine for washing and dehydration at one time, and the clothes are biased, resulting in the displacement of the washing machine;

3. In the process of high-speed rotation of the dehydration barrel driven by the dehydration motor, due to the action of centrifugal force, the washing machine is displaced.