How to adjust the temperature of Hisense refrigerator BCD 200E? Manuals are also OK. Thanks

Updated on home 2024-02-09
8 answers
  1. Anonymous users2024-02-05

    Key definitions. a"Smart" button: After unlocking, make the refrigerator enter smart mode; In the locked state, set the clock "hour".

    b"Setting" button: After unlocking, adjust the temperature setting of the refrigerator in normal temperature control mode; When locked, enter the clock setting.

    d"Quick Freezing" button: After unlocking, make the refrigerator enter the quick freezing mode; When locked, set the clock "minutes".

    e "Freezer display" button: displays the temperature of the freezer.

    f "Unlock key": In the locked state, the key combination is "Smart" + "Quick Freezing". Unlock status.

    Note: The order of the buttons is "Settings", "Smart", "Quick Freezing", and "Freezing Display".

    The initial power-on operation mode is the initial state: automatically enter the "smart" mode; The "Smart" icon is on, the "Quick Freezing" icon is not lit, and the "Lock" icon is off. The time is set to "12:00".

    Locking and unlocking functions of the control panel.

    When the "lock" icon is lit (locked state), the freezer temperature display and clock setting button operation are carried out; In the case of locking, press the "smart" button and the "quick-freezing" button at the same time, the "lock" icon is off, you can set the following temperatures and modes, if you do not press the button for more than 10s, the lock icon will light up and enter the lock state.

    Temperature regulation and control function under normal conditions.

    Refrigeration temperature regulation.

    After unlocking, press the "Set" button, the original set gear starts to flash at a frequency of 1Hz, enter the temperature setting mode, and then press the "Set" button, the temperature gear increases by 1 until the highest gear and then turns to the lowest gear, and so on. If the key operation is not carried out after 5s, the temperature setting value will stop flashing, and the setting value will be confirmed to be valid, and the key operation will not be carried out after 10s, and the lock icon will light up and enter the lock state.

    The normal setting gear (a total of 12 gears) refrigerated room evaporator sensor boot temperature is 4, and the corresponding shutdown point temperature of each gear is as follows:

    Refrigeration start-up procedure: When the maximum temperature of the freezer is required to be turned on, the shutdown is allowed when the highest point of the freezer is -19. During the operation of the refrigerator, as long as the maximum temperature of the freezer compartment is , it is necessary to judge the -19 shutdown condition.

  2. Anonymous users2024-02-04

    But I don't know how to adjust Hisense refrigerator BCD-200E Although there is no answer, still thank you for your enthusiasm and adjust it according to your needs. If it still can't be improved, it means that there is a problem with the refrigerator, which is very good.

  3. Anonymous users2024-02-03

    How to set the temperature of Haier refrigerator BCD-240SEGH.

    1. Haier smart refrigerator temperature adjustment method: 1Press the "Smart" button on the control panel of the refrigerator, the icon E lights up, press the "Smart" button again to exit the smart function state; 2.

    Press the "Refrigeration" button to display the current refrigerator temperature, press the "Refrigeration" button again to lower the refrigerator temperature, and reduce the refrigerator compartment temperature by 1 each time; 3.Press the "freezing" button to display the current freezer temperature, and press the "freezing smile" button again to lower the temperature of the refrigerator, and the temperature of the refrigerator can be lowered by 1 per press; 4.After 5 seconds of operation, there is no button, that is, the temperature adjustment of the refrigerator freezer is completed.

    The operation method of temperature regulation of different models is subject to the manual) Xunhong change.

  4. Anonymous users2024-02-02

    Hello Dear Kiss I'm glad to answer for you The regulator of the Hisense refrigerator is 7 gears: Pai Chai's lack of 1 gear controls the temperature at about 9 10, which is also the highest temperature in the refrigerator room, and this gear needs to be set when the indoor temperature exceeds 32 degrees in summer. The temperature of the second gear is around 8, which is also a commonly used gear in summer.

    3 Gears at 6 7 . The temperature of the 4th gear is around 5, these two gears are suitable for spring and autumn, and the indoor temperature is set at 20 to 25 degrees. The 5 levels control the temperature at about 4.

    6 gears are around 3, these two gears are usually set in winter, when the indoor temperature is below 15 degrees. Variable 7 is strong cold, and the temperature is usually around 2. Usually it is rarely set in this gear, and when a large amount of food is placed in the refrigerator and refrigeration is urgently needed, the compressor is likely to not stop when this gear is set.

    In addition, when the ambient temperature of Zhaoqing file dust defense is lower than 16, it is necessary to turn on the low temperature compensation switch to ensure the start-up rate and freezing effect of the refrigerator. Otherwise, the refrigerator will not be turned on or thawed. I hope mine can help you, I wish you a happy life, and you can continue to click on my avatar to ask questions.

  5. Anonymous users2024-02-01

    The initial power-on running state is the initial state: the button is in the unlocked state, automatically set in the intelligent running state, and does not enter the quick-freezing button lock and unlock In the key unlocking state, if there is no key operation in 10s, it will automatically enter the lock state Tong pin, the "lock icon" is lit, and other keys except the "unlock key" do not work.

    Introduction: Refrigerator is a kind of refrigeration equipment that maintains a constant low temperature, and it is also a civilian product that keeps food or other items in a constant low temperature and cold state. Inside the box there is a compressor, a cabinet or box for ice making for icing, and a storage box with a refrigeration unit.

    The volume of a household refrigerator is usually 20 500 liters. In 1910, the world's first household refrigerator with compression refrigeration came out in the United States. In 1925, the Swedish Lido company developed the household absorption refrigerator.

    In 1927, the General Electric Company of the United States developed a fully enclosed refrigerator.

    Working principle: The refrigerator provides mechanical energy by an electric motor, and works on the refrigeration system through the compressor. The refrigeration system is made by using the principle of low boiling point refrigerant to absorb heat during evaporation.

    Its advantage is that it has a long life and is easy to use, 91 to 95% of the world's refrigerators fall into this category. Commonly used refrigerators utilize a refrigerant called R600 Refrigerator A as heat"Porters", put it in the refrigerator"Heat""Porteering"to the outside of the refrigerator.

    Expansion: Forced circulation of air conditioning: also known as intercooling or frost-free refrigerators.

    There is a small fan in the refrigerator that forces the inflated air flow in the box, so the temperature in the box is uniform, the cooling speed is fast, and it is easy to use. However, due to the defrosting system, the power consumption is slightly larger, and the manufacturing is relatively complicated. Air-conditioned natural convection:

    It is also known as a direct-cooled or frosted refrigerator. The freezer is directly surrounded by an evaporator, or there is an evaporator in the cold room, and an evaporator is arranged in the upper part of the refrigerator, which directly absorbs heat and cools down by the evaporator.

  6. Anonymous users2024-01-31

    How to adjust the temperature of Hisense refrigerator bcd a 210tdag d.

    Hello dear, I'll help you solve this problem. How to adjust the temperature of Hisense refrigerator bcd-210tdag d is as follows: Refrigerator thermostat adjustment method 1 Refrigerator thermostat winter and summer adjustment method:

    1. There are 0 to 4 gears or 0 to 7 gears on the refrigerator thermostat, of which 0 gear is the shutdown gear and 5 to 7 is the forced cold gear, and the compressor of the refrigerator will show a non-stop state in this gear. 2. The larger the number on the refrigerator thermostat, the lower its temperature inside the refrigerator. 3. In order to better achieve the purpose of food preservation and power saving, the thermostat can be adjusted to 1 or 2 gear in summer, and to 4 or 5 gear in winter.

    Refrigerator thermostat adjustment method 2 1. When adjusting the refrigerator thermostat in summer, you need to adjust the thermostat to 2 to 4 gears. In summer, the adjustment of the gear is too large, which will cause the refrigerator to not stop, and the temperature difference between the inside and outside of the refrigerator will be large, and more heat will enter the inside of the refrigerator through the box wall. In order to better ensure the operation of the refrigerator, it is necessary to adjust the thermostat of the refrigerator to be smaller and keep the compressor of the refrigerator at a certain start-stop ratio.

    2. When adjusting the refrigerator thermostat in winter, you need to adjust the thermostat of the refrigerator to a larger position, the temperature around the refrigerator is low, and the shutdown time of the compressor of the refrigerator is longer, but the temperature of the freezer of the refrigerator can not meet the requirements, so you can choose to adjust the thermostat of the refrigerator slightly larger in winter to ensure the temperature in the freezer compartment of the refrigerator. 3. When the ambient temperature around the refrigerator is lower than 16 degrees Celsius, it is necessary to turn on the electric heating compensation switch of the refrigerator, which can ensure the load temperature of the refrigerator freezer and prevent the thermostat from malfunctioning due to too low temperature.

  7. Anonymous users2024-01-30

    Hisense BCD-262TDE How to adjust the temperature of the refrigerator, there are only 4 buttons.

    How to adjust the temperature of Hisense BCD-262TDE refrigerator,There are only 4 buttons:Under normal circumstances,The temperature of the freezer compartment of the refrigerator should be lower than minus 18 degrees,The temperature of the refrigerator room is about 5 8 degrees,The preservation effect of acorns in the food chaos hall is the best,It also saves electricity。 Spring and autumn can be set in about 3 gears, summer set between 1 and 2 gears, winter set in about 4 5 gears, there is a winter temperature compensation switch, the switch should be turned on, in order to ensure that the compressor can start normally.

    In short, the lower the gear (at 1st gear), the shorter the working time of the compressor and the most energy-saving in the case of ensuring the freshness and freezing of food next to the refrigerator. Hope mine can help you.

    1. First turn off the smart in the 4 buttons on the refrigerator door. Then press Freezer, 2, you can bury or dislike the temperature of the freezer, the temperature of the manuscript shows that there is no up and down arrow indication. 3. Press the upward arrow to adjust to the desired degree.

    Then select the refrigeration button and press it to adjust the temperature of the refrigerator room. Hope my pair of benders you help.

  8. Anonymous users2024-01-29

    How to adjust the temperature of Hisense refrigerator BCD-256WDG BP in autumn?

    Dear, hello, it's a pleasure to serve you, how to adjust the temperature of Hisense refrigerator BCD-256WDG BP in autumn? A1. When the temperature is adjusted in summer, the working time and power consumption of the refrigerator are greatly affected by the ambient temperature during use. In summer, when the ambient temperature is high, the temperature should be adjusted between 1-2 gears.

    2. At present, the temperature represented by the number of the refrigerator refrigerator thermostat is reversed. That is, the lower the temperature, the higher the number. 3, the refrigerator temperature control optional button is basically gear, the larger the number, the lower the temperature of the refrigerator refrigerator, in general, in spring and autumn only need to adjust the refrigerator temperature to 3 when, summer refrigerator temperature to 1 or 2 gear, so as to achieve better energy saving effect.

Related questions
8 answers2024-02-09

I sent you all my information except for listening, my hearing is too big, I hope it will help you, don't forget to give me points.