-
The English meaning is as follows:
Updating ESCD (ESCD stands for Extended System Configuration Data, which is actually the previous device resource allocation table that the BIOS retains. This step is no problem by stating that the BIOS configuration is fine).
Detects the configuration library information of the system hardware.
Failed to boot from hard disk.
I think if it's not the hard drive, then there is something wrong with the motherboard, and since it can boot from the hard drive after a while of heat, I suggest you try it from the following aspects.
Prepare a good hard drive, replace this hard drive, if it boots up smoothly, it seems that there is a problem with the motherboard, if not, then suspect the motherboard.
Your power supply, is your power supply enough?
My feeling may be that there is a problem with the quality of a capacitor, of course, it is not ruled out that there is a bug in the BIOS chip, so try it from these aspects.
-
Maybe the main partition (C drive) has bad sectors, use the windows98 boot disk to enter DOS to check it.
-
ESCD is an abbreviation for "Extended System Configuration Data", which means Extended System Configuration Data, which is actually the previous device resource allocation table retained by the BIOS. When we insert a new expansion card or device, because the new card or device will occupy system resources, it may conflict with the previous resource allocation table, and the system will show instability or error messages when working. At this point, we need to adjust some of the options of the BIOS.
For example, you can set the "Reset Configuration Data" (also known as "Force Update ESCD" option on some motherboards) to Enabled at this point to allow the BIOS to reallocate system resources to all expansion cards when the computer is booted up again. However, on some motherboards, if this option is enabled, it will automatically change back to disabled the next time it boots. Also note that the ESCD update data is stored in the motherboard's BIOS chip.
If the Flash function of the BIOS on the motherboard is set to Disable, the system will not be able to write the updated ESCD data to the Flash chip, so the "Updating ESCD..." will appear every timeThis kind of reminder message. So take a good look at your BIOS settings.
If it's really okay, change the motherboard battery.
-
Check your hard drive first. When the machine is not hot, turn on the BIOS first, and see if there is a hard disk detected in the first item. Then try to listen to the sound of the hard drive.
When you turn on the power-up, there should be the sound of the main motor of the hard disk starting and the sound of the seek head out of the warehouse, if there is a clattering sound all the time, it is estimated that your hard disk will be reported to God. If you are sure that there is no problem with the hard drive, then upgrade the BIOS of the motherboard, if not, congratulations, you have found the problem. There's something wrong with your motherboard.
I've come across it before. All settings can be saved. But none of them are valid.
Find a dealer. If you're still in the warranty.
-
Your English display message is that the hard disk has failed to detect, this should have nothing to do with your motherboard, it may be that your hard disk needs to be warmed up! Hehe! Check out the hard drive!
-
High score questions, none of them have technical content, alas, disappointed! ~
will give you a satisfactory answer.
-
How long has your motherboard been in use?
Check the battery voltage on your motherboard, it is estimated that the CMOS is not saved, and you need to change the motherboard battery.
-
Judging from the information you gave, there may be a problem inside the hard drive, and the computer can't detect the hard drive when it's not hot. You should be able to see if there is hard drive data when you turn it on. There is also to turn on the power of the optical drive, try to connect the optical hard disk or turn off the optical drive interface in the BIOS.
If that's still the case, then you'll have to try a different hard drive.
-
1. Look at the settings of the master and slave jumpers (that is, the data cable isolation) of your hard disk and optical drive.
2. Maybe the 0 track of your hard disk cannot be loaded, that is, the track is damaged, it will automatically turn to boot with optical drive. If so, you can reinstall the OS with the information of the drive.
-
Buying a motherboard first depends on what CPU you choose, if it's Inter, use Inter's motherboard, if it's AMD, use AMD's motherboard, if it's AMD, it's still better for AMD, and if it's cost-effective, AMD's series is still better, and high-end Inter is currently a strong point, and for ordinary users, AMD's is more affordable. In addition, if you want to play large games, then go to the motherboard without integrated graphics, if you only play small games, buy a motherboard with integrated graphics, and finally look at the brand, the first line has ASUS Gixi, MSI, etc., the second line has Onda, Rainbow, Jet, etc., if you are not pursuing overclocking, it is recommended that the second line is on the line, after all, it is much cheaper, if you are an enthusiast, the motherboard on the first line is stronger and more stable.
The most important thing to pay attention to is the market maintenance situation of the motherboard! Don't buy it if the repair rate is high! Recommend GIGABYTE! ASUS!
In terms of cost performance, the AMD series is still relatively good, and the high-end Inter is currently a strong point. Choose for yourself. But it's not too much of a problem. You can also pick any one, each with its own value.
If you are ready to use it yourself, and it takes a long time, you must choose a board with sufficient materials.
If you don't understand the compatibility problem, you can go to the Pacific Ocean and other ** in advance to take a look, each motherboard has its own suitable CPU, generally speaking, a motherboard is suitable for multiple CPUs. However, the Inter board can only use the CPU of Inter, and the board of AMD can only use the CPU of AMD.
-
Pay attention to see if it's original, there are still quite a lot of profiteers, hehe.
-
There are many things to pay attention to! The first is whether the motherboard is genuine or a parallel import! Now there are many brands of motherboards, uneven, and there are more!
Then there is the interface and voltage of the motherboard! There are some motherboards with old-fashioned interfaces, and the hardware is not well matched! If you don't have a good voltage, the motherboard will sometimes lose power frequently!
That's all!
I want to tell you that the P35 chipset only supports the standard graphics card, the 3850, 3870 and 9600, 9800 are all standard graphics cards, and only the X38, X48 (Intel platform) supports. But it's not that it can't be used, it's just that the performance of the graphics card can't be 100% played. >>>More
I don't know if you're a businessman who often makes drawings. If so, I can use all of these things, just like a mage's blood can be exchanged for a lowest-level hardener (the lowest hardener is very useful, for awakening quests, and for normal quests. ), the Minotaur's hard horn can also be changed in Daphneli. >>>More
Dribbling is naturally very important, start to stabilize the left hand and right hand dribbling alone, after a period of time the left and right hands alternately dribble, hobby, you have to practice more, consider the problem of height, I personally think that we usually play with the ball, the shooting ability is more effective than the ability to dribble through, after all, shooting is a direct and more effective means, and there are many people in the inner line when the hard breakthrough is not realistic, so we should pay more attention to teamwork, dribbling, shooting, passing ability has improved is not there is no psychological burden, Physical strength is not something that can be practiced at once, take your time, play half a game first, try to play the whole game after you play well, and then try to play the whole game and follow the whole game, this is all a gradual process, you can't rush.
Tell you a home remedy (a hairdresser I know taught me), when washing your hair, add a little vinegar, it's pretty good, you can try it, anyway, vinegar is nothing***.
Right-click on IE-Properties-Programs-Manage Add-on.
Disable all plugins that have not been verified. You can turn off those hijackers. >>>More