How to check if win8 1 is permanently activated

1. Open the run command box and run: The activation information that can be queried by the -dlv command includes: activation ID, installation ID, activation deadline, etc.

2. Permanently activate the query method.

Run: -dli command to query the operating system version, some product keys, license status, and so on.

3.Run: -xpr command to query whether it is permanently activated, as shown in the following image:

To see if the method is permanently activated, you can use the xpr command.

Software Tools:1Press and hold "Win key + R key" on the keyboard to open the run window.

2.Input: xpr press enter to open.

3.A pop-up window will pop up with the cut-off time for the current license status. Permanently activated ones are displayed as "Computer Permanently Activated".

4. If the display is in notification mode, it is not activated successfully.

Permanently activate the query method.

Run: -dli command to query the operating system version, some product keys, license status, and so on.

Run: -xpr command to query whether it is permanently activated, as shown in the following image:

3.A pop-up window will pop up with the cut-off time for the current license status. Permanently activated ones are displayed as "Computer Permanently Activated".

Permanent Activation Status Query Method steps.

Permanently activating the query method is as simple as opening the Run command box with the Windows + R shortcut and then running a few commands.

Open the Run command box.

Run the -dlv command to query the activation information, including the activation ID, installation ID, and activation deadline.

Permanently activate the query method.

Run: -dli command to query the operating system version, some product keys, license status, and so on.

Run: -xpr command to query if it is permanently activated.

Permanently activate the query method.

Run: winver command to query the kernel version of the system, as well as the registered user.

The permanent activation query method is very simple, as long as.

Open the Run command box and run:

Permanently activate the query method run:

Permanently activate the query method to run: winver

You can start by using the Windows + R shortcut to open the Run command box.

Enter the -xpr command to see if it is permanently activated.

Permanent Activation Status Query Method steps.

1. The permanent activation query method is very simple, as long as you use the Windows + R combination shortcut key to open the run command box first, and then run a few commands, as shown in the following figure:

2. Open the Run Command box.

Run the -dlv command to query the activation information, including the activation ID, installation ID, and activation deadline.

3. Permanently activate query method 2:

Run: -dli command to query the operating system version, some product keys, license status, and so on.

Run: -xpr command to query whether it is permanently activated, as shown in the following image:

4. Permanently activate query method 3:

There is no talk of permanent activation in the system, it will only be activated once and asked again after a few months.

The current activation software has an auto-renewal function, which is similar to permanent activation, and it is easy to be accidentally killed by antivirus software ......

Step 1, Right-click on "Windows Logo" at the bottom left corner of your desktop and select the "Run" menu item in the pop-up menu.

2. Enter the -xpr command in the running dialog box that opens, and click the OK button.

3,This is the window that will pop up whether it is permanently activated,The author is batch activation,There is only 180 days,If it is permanently activated,The words of permanent activation will be displayed in the window。

4, Next we take a look at the activation details, enter "-dlv" in the run dialog box, and click the OK button.

5. At this time, some details of the activation will pop up, and we can learn the details of the activation through this window.

Right-click on the Start menu, select Run as Administrator, and enter the following commands:

dlvdli

After each completion of the XPR, you need to press enter to view the detailed system activation information.

1. The permanent activation query method is very simple, as long as you use the Windows + R combination shortcut key to open the run command box first, and then run a few commands.

2. Open the run command box and run: -dlv command to query the activation information, including: activation ID, installation ID, activation deadline, etc.

3. Permanently activate the query method.

Run: -dli command to query the operating system version, some product keys, license status, and so on. Run: -xpr command to query whether it is permanently activated, and run: winver command to query the system kernel version, as well as registered users

1. Use the Windows + R combination shortcut key to open the run command box, and then run a few commands, as shown in the following figure:

2.Run the -dlv command to query the activation information, including the activation ID, installation ID, and activation deadline.

3.Run: -dli command to query the operating system version, some product keys, license status, and so on.

Run: -xpr command to query whether it is permanently activated, as shown in the following image:

4.Run: winver command to query the system kernel version, as well as registered users, as shown in the following figure:

2. Solutions that are not permanently activated.

The permanent activation query method is very simple, just use the Windows + R shortcut to open the run command box first, and then run a few commands, as shown in the following figure:

Open the Run command box.

Run the -dlv command to query the activation information, including the activation ID, installation ID, and activation deadline.

Permanently activate the query method.

Run: -dli command to query the operating system version, some product keys, license status, and so on.

Run: -xpr command to query whether it is permanently activated, as shown in the following image:

Permanently activate the query method.

Run: winver command to query the system kernel version, as well as registered users, as shown in the following figure:

Right-click on my computer, and you can see if the properties are activated.

Start -- run -xpr -- OK see?

1. Use. windows

r combination shortcut key to open the run command box, and then run a few pieces of commands, as shown in the following figure:

2.Run the -dlv command to query the activation information, including the activation ID, installation ID, and activation deadline.

3.Run: -dli command to query the operating system version, some product keys, license status, and so on.

Run: -xpr command to query whether it is permanently activated, as shown in the following image:

4.Run: winver

The command can query the kernel version of the system, as well as the registered user, as shown in the following figure

2. Solutions that are not permanently activated.

1. Win8 Activation Tool (KMSPICO).

Introduction to Permanently Activated Edition:

WinWin8 Activation Tool (KMSPICO) is the latest Win8 activation tool! The win8 system can be successfully activated, and some friends who are unsuccessful in activating through ** can also give it a try!

2. Winwin8 Activation Tool (KMSPICO) Instructions:

kmspico_

Activate the tool; 2. After the installation is completed, the operation window will automatically pop up, and you can activate it by clicking the big red button (click create to back up the activation file);

3. Wait patiently for a while, and the win8 system will be activated;

4. After the activation is completed, you can go to the win8 system properties to view the activation status.

You can view whether it is activated or not. If activated, it will be written "Activated". If it is not activated, write "not yet activated", which needs to be activated.

Here's how:

1. Right-click "Computer" and select "Properties" from the pop-up menu.

2, and then you can see the activation status of win8 in the "Windows Activation" bar at the bottom of the window.

1. Run the following command to view:

2. Win+r===> input -dlv to display: the most detailed activation information, including: activation ID, installation ID, activation deadline.

3. Win+r===> input -dli to display: OS version, part of the product key, license status.

4. Win+R===> input -xpr display: whether it is completely activated5. Win+r===> input winver display: windows version information.

The permanent activation query method is very simple, just use the Windows + R shortcut to open the run command box first, and then run a few commands, as shown in the following figure:

Open the Run command box.

Run the -dlv command to query the activation information, including the activation ID, installation ID, and activation deadline.

Permanently activate the query method.

Run: -dli command to query the operating system version, some product keys, license status, and so on.

Run: -xpr command to query whether it is permanently activated, as shown in the following image:

Permanently activate the query method.

Run: winver command to query the system kernel version, as well as registered users, as shown in the following figure:

Steps and Methods:

Method 1: 1, enter the system, press the key combination win+r to bring up the run dialog box, and then enter the command. Click OK.

2. Display the activation status and result

Method 21, enter the system, press the key combination win+r to bring up the run dialog box, then enter the command, and click OK.

2. Check the results.

Methods and Steps:

Method 3: 1. Right-click "Computer" and select "Properties".

2. Check the results.

Logo key + R key or right click to start --Run: type -xpr --OK in the box --see if it is permanently activated?