Peugeot 307 brakes, how to change the Peugeot 307 brake switch

Hot car braking distance is an important indicator to measure the safety factor of the car, in order to facilitate everyone to choose the most suitable car, we here will be the domestic car 100 0km h braking distance summarized, so that the majority of netizens to read and query. The unit of hot braking distance is unified: meters (m).

Hot braking distance 42 meters (m) is good (marked with green words) Hot car braking distance 43-47 meters (m) is good (marked by blue words) Hot car braking distance 48 meters (m) is poor (marked by red letters) Some cars are really long enough...

Less than 100,000 yuan.

Brilliance Junjie. Braking distance for hot cars: 45

Chery A5 hot car braking distance:

BYD F3

Braking distance: Gol

Hot car braking distance:

Fiesta Hot Car Braking Distance:

Aveo. Hot car braking distance:

Swift. Hot car braking distance:

Paleo hot car braking distance:

Beverly. Hot car braking distance:

Xiali N3 hot car braking distance:

Cowin. Hot car braking distance:

Jetta GIF

Hot car braking distance:

10-200,000 yuan.

The sedan polo is strong.

Hot car braking distance:

Hatchback Focus.

Hot car braking distance:

Picasso. Hot car braking distance:

Triumph. Braking distance for hot cars: 39

Sylphy. Braking distance for hot cars: 41

Pentium. Hot car braking distance:

Honda Civic

Hot car braking distance:

Sidi. Hot car braking distance:

Mazda3 hot car braking distance: 36

Peugeot 206 hot car braking distance: 39

Peugeot 307 hot car braking distance: 41

Kaiyue HRV hot car braking distance:

Outlander. Hot car braking distance:

Elantra hot car braking distance:

Mondeo hot car braking distance:

Fox hot car braking distance:

Tiida. Hot car braking distance:

Tiida. Hot car braking distance:

Lingshuai braking distance:

Fit hatchback. Hot car braking distance:

Cerato hot car braking distance:

Seine. Hot car braking distance:

Bora hot car braking distance:

Golf hot car braking distance:

Kaiyue hot car braking distance: 43

Corolla. Hot car braking distance:

Braking distance of the hot car:

Jingcheng. Hot car braking distance:

Hatchback polo

Hot car braking distance:

Zunchi hot car braking distance: 42

。Excerpt, 20W or more models omitted.

100 kilometers braking distance meters is still good.

The braking effect of the Peugeot 307 is good, and I will drive her my little lion now. European brands can be trusted. The space is also good. There is enough for the family.

It's good, you can brake it with a little bit.

The pedals are not heavy, suitable for both men and women, and the foot feels good!!

Yes, I didn't get used to it at first, and I braked it to death with a little click.

Hello dear! The replacement method of the brake switch is as follows: 1. Remove the connector first, and then grab the brake switch and turn it counterclockwise, and the brake switch can be removed; 2. There is a trick when installing the brake switch next to the Anla, you can step on the brake pedal with your foot, insert the brake switch into the hole above the brake switch, release the brake pedal, make the brake pedal compress the pressure lever of the brake switch, and rotate the brake switch clockwise to the limit position at the same time; 3. Then the pin on it will rotate to the position indicated by the arrow, and the card wheel will be closed, and the pressure rod will also be pushed to the appropriate length, so that the installation can be completed without manual adjustment.

1.Peugeot 307 brake pads are replaced every 4-60,000 km. Brake pads are composed of steel plates, adhesive insulation, and friction blocks, and the braking effect is determined by the brake pads.

2.The length, width and height of the standard bird noisy 307 are 4212mm, 1762mm, hail 1531mm, wheelbase 2608mm, maximum speed 195km, fuel tank volume 60L.

3.The Peugeot 307 is powered by a five-speed manual gearbox with a maximum power supply of 86 kW and a maximum power of 6,000 rpm. The drive mode is front drive.

4.The tire specification of this car is 205 55R16, equipped with tire pressure alarm, front seat belt unfastened warning, engine electronic anti-theft, rear radar.

1.Replace the brake pads of the Peugeot 307: first lower the handbrake, then lift the car and remove the tires so that the brake cylinder on the brake disc can be seen; Next, disassemble the brake cylinder and unscrew the set screw on the brake cylinder with a wrench; After removing the screws, remove the old brake pads; Replace the brake cylinder piston and replace it with new brake pads.

2.Brake pads are composed of friction material layer, thermal insulation layer, adhesive layer, back plate, etc. The brake pad cylinder pushes the pad to press the friction material of the brake pad against the brake disc for braking, so the quality of the brake pad is particularly important.

Some brake pads have poor braking effect but long service life, and some brake pads have soft friction materials but good braking performance. From this it can be seen that the service life of brake pads is directly related to the quality of the friction material. Each brake pad has a raised logo on either side.

The thickness of this logo is around 3mm, which is also the limit of the thinnest brake pad replacement. If the thickness of the brake pads is already parallel to this mark, it must be replaced. So when the thickness of the brake pads is close to this mark, the owner of the car is always watching and ready.

However, if the fetus is not removed, it is difficult to accurately observe with the naked eye. At present, when the brake pads of many models are too thin, the position of the instrument handbrake light will be indicated, which is relatively convenient for self-inspection.

Summary. If there is an ABS failure, then there must be a problem, that is, there is a fault with the braking system, there may be a problem with the ABS pump or there may be a problem with the ABS control module. Specifically, it is necessary to use computer testing to deal with maintenance according to the fault of computer detection.

Hello, I have seen your inquiry, please wait for a moment and answer it for you immediately.

What is the problem with this foot brake of this Peugeot 308 you are talking about? Whether the car can't be braked or the brake pedal feels softer after being pressed, or whether there is a problem with this pedal, it needs to be made clear to make a specific judgment. Brigade rolls.

My foot brake is empty, and the ABS fault code appears.

If there is an ABS failure, then there must be a problem, that is, this is a fault with the braking system, there may be a problem with the ABS pump or there may be a problem with the ABS control module. Specifically, the stool needs to be tested by the computer, and the fault of the computer inspection and travel test is handled and repaired.

If there is a problem with the pump, the cost is large, whether the tire contact line is loose or covered by dirt.

It is possible that the ABS sensor will have to be thoroughly cleaned after being removed. If there is no problem, then ABS pumps can only be considered.

Peugeot 307 how to change brake pads Peugeot 307 change brake pads: first put down the handbrake, then jack up the car, remove the tires, you can see the brake pump on the brake disc; Next, begin to disassemble the brake cylinder, unscrew the set screw on the brake cylinder with a wrench; The old brake pads can be removed after the screws are removed; Go back to the brake cylinder piston and finally replace it with a new brake pad. Brake pads are composed of friction material layer, thermal insulation layer, adhesive layer, back plate, etc.

The quality of the brake pads is particularly important because the friction material of the brake pads is pressed against the brake disc by pushing the back plate through the brake cylinder. Some brake pads have harder friction materials and poor braking effect but long service life, and some brake pads have softer friction materials but good braking performance. From this point, it can be seen that the service life of brake pads is directly related to the quality of friction materials.

Each pad has a raised logo on both sides, and the thickness of this logo is about mm, which is also the limit for the thinnest brake disc replacement. If the thickness of the brake pads is already parallel to this mark, it must be replaced. Therefore, when the thickness of the brake pads is close to this mark, the owner of the car can observe the inspection at any time, but it is difficult to accurately observe with the naked eye without removing the tire.

At present, many models will give a hint of the position of the instrument hand brake light when the brake pad is too thin, which is more convenient than self-inspection. Millions of car purchase subsidies.

There are 3 ways to determine whether the brake disc needs to be replaced:

1.Listen to the sound: If the brake is tapped, accompanied by the slightest sound or shouting (it may also be the effect of the brake pads running in at the beginning of installation), the brake pads must be replaced immediately.

Because the limit markings on both sides of the brake pads have been directly rubbed against the brake disc, it proves that the brake pads have exceeded the limit.

In this case, it is necessary to cooperate with the inspection of the brake disc while replacing the brake pads. When this sound occurs, the brake disc has been damaged and scratched, and even if the brake pads are replaced with new ones, the sound cannot be eliminated, so it is recommended to replace the brake disc in time.

<>In addition, some bad quality brake pads have hard spots, which will also produce abnormal noise, and in general, the abnormal noise generated by this will disappear after a period of grinding.

2.Usually, whether the brake pad warning light on the instrument display is lit is used as the basis for judging whether the brake disc should be changed. Generally, the indicator light is out of state, when the brake disc is faulty or excessive wear, the light is on, extinguished after repair, when the gear warning light is on, the brake section has been worn to the limit, the braking effect has declined, which greatly affects the driving safety, therefore, it is recommended to regularly check the brake disc wear to see if it can be used, and do not only believe the warning light.

3.Look at the thickness: Most brake disc products have a wear indicator, that is, there will be 3 small dimples on the sensitive plate.

Use vernier calipers to measure the depth of the hole. In other words, the total wear depth of the brake disc on both sides reaches 3 mm. It is necessary to replace the brake disc in time.

Grip trembling. >< not all brake discs have wear indicators. We can use our hands to touch the extended side of the disc to determine the approximate depth, generally speaking, if the total wear depth of the brake disc on both sides reaches 3mm, the brake disc should be replaced in time.