How to install the decoration wire connector e, the home improvement wire connector method

Decorating houses will be designed and installed wires, but there are many types of wires, so it is best to see what methods are available when installing, and it is best to understand when wiring, and the selection of some evil wires also needs to be mastered, thenHome improvement wire connectorsWhat are the methods? What are the methods of selecting and dismantling home improvement wires? Let's introduce it to you.

1. Home improvement wire connectors.

1. Wire connection is a very common connection, usually we see the wire connection is this, the copper wire in the wire is staggered and entangled, so as to ensure that the joint of the wire will not occur fire, short circuit or poor contact, which is also a connection method that every electrician will.

2. This connection method is relatively rare, mainly because the main line can not be truncated, and those wires are wound around the main line for 6 to 8 times, but this connection method is prone to fire, short circuit, poor contact and other scenes, mainly because when wiring, the wire end is not handled well, resulting in loosening, the high-load current produces electric ions through each other, and the mutual repulsion of electric ions is prone to sparks, and the temperature is also very fast to rise, and this connection method is rarely used nowadays.

3. This kind of connection is the wiring method of crimping, this wire wiring method is the most practical and standardized one nowadays, but this connection method needs special tools to do, this crimping cap needs crimping pliers to crimp the line, and then put the special pliers of the pressure wire on the crimping line, and press it hard. In addition, the size of the crimping cap is very dependent on the size of the wire diameter and the number of roots.

Second, how to choose home improvement wires.

1. Length, this is one of the tricks often used in cutting corners, some people will say, I bought the wire with a meter mark, it is 100 meters, you have to pay attention, he has a meter mark, but in the middle part, some profiteers are less than 10 meters. For example, after 30 meters, 40 meters will be marked.

2. Silk diameter, which is one of the most common ways to cut corners in the city. For example, a square BV wire, commonly known as copper single, is a copper wire of a wire, because the cross-sectional area of the copper wire of this wire is a square millimeter. The square BV wire, the diameter of the copper wire is.

3. The quality of copper, real copper, is a reddish color, while brass is yellow. In addition, copper is very soft, and brass is hard. As long as you don't buy copper-clad aluminum (aluminum, but with a layer of copper plated on the outside, which is generally used for soft wires), there are not too many fakes of brass at present.

Home decoration is the installation of wires, but the wires need joints, but the method of joints is different, so what are the methods of home improvement wiring joints and the selection of wires, after reading the above introduction, everyone also understands it, if you still want to know more decoration information, please continue to pay attention to it.