The prospect of CNC technology is also 10

He believes that technology still comes first, because it is a discipline that relies on technology to achieve success. It's not the same as those liberal arts disciplines.

Therefore, if you don't have the determination to work hard and go beyond the efforts of ordinary people, you will not make achievements in this field.

In other words, the employment prospects of CNC majors alone are quite good. Because, as long as you have mastered a certain skill and you can be in charge on your own, someone will want you. It's not like those liberal arts students, who only talk about it, hehe.

Personally, I also believe that no matter what major, there is no problem of employment difficulties. I have a lot of senior brothers, saying that it is very difficult for us to get employment in this major, hehe, I studied electronics.

But they haven't learned anything real, so can it not be difficult to find a job? A college student who graduated from electronics went to a small unknown ** after graduation, what kind of art, hehe. I don't dare to imagine, I have a solid professional knowledge, and I am not afraid that no one will want it.

The so-called difficulty in college employment can be understood when you go to the university. How can people who have not learned anything have good employment?

As far as I know, in terms of data professional learning, in addition to learning the electronic circuits of hardware, you also need to learn software programming. Because they are much more important than other majors. Here's a simple example:

You are a designer of CNC lathes, to design a high-precision CNC lathe, you have to master not only the working principle of the lathe (mechanical), but also the CNC part (electronic computer part), the console part (electronic circuit part), and so on. Personally, I think this major is a good place to cultivate talents. If you want to challenge yourself, give it a try.

Not much more.

Going to the factory to operate a CNC machine tool is mainly about operation and CNC programming.

The employment directions of CNC technology majors are:

CNC operator, CNC programmer, CNC adjuster, CNC machine tool maintenance worker, CNC field technician, CNC machine tool designer.

1. Major in CNC technology.

Direction of employment. Mainly for the power generation equipment manufacturing, military industry, aerospace industry, shipbuilding, data equipment manufacturing and other high-end equipment manufacturing industry, engaged in CNC machine tool operation, data processing programming, data processing technology preparation, product quality inspection, on-site management.

Production scheduling, CNC equipment sales and after-sales service.

2. Employment prospects for CNC technology majors.

The prospect of CNC technology is OK, now most of the things are processed by CNC machining, the bottom and the salary is good, but the work is harder. CNC technology graduates are mainly oriented to the Pearl River Delta.

Foreign-funded large and medium-sized enterprises and institutions.

and the operation, sales, process, equipment maintenance and other departments of state-owned enterprises and institutions. In addition, it can also be engaged in CAD CAM software application, sales and technical service of CNC systems or equipment, installation, commissioning and maintenance of CNC equipment, as well as workshop production organization and management.

CNC is the abbreviation of digital control, and CNC technology is a method of using digital information to control mechanical movement and machining process.

Main employment directions:

Clause. First, you can choose the CNC operator, after CNC internship and CNC operation training students know that they can be competent, but this work is the most competitive pressure for the job, any engineering higher vocational has this major, not to mention the secondary vocational and technical school students. At present, the CNC operation positions in China's machining industry have basically reached saturation.

Some students told me that their classmates had graduated from junior high school and had been doing CNC operations five or six years earlier than them, and they were all skilled workers, and their wages were okay, so they felt very hopeless. I told them that the comparison is not about the present, but about the future.

Clause. Second, CNC programmer. Many machining companies use automatic programming to generate CNC machining programs, so they need to learn CAM software.

Different units use different CAM software, and there are many types, but in general, the processing methods are similar, so you must learn one well. However, being a CNC programmer is very demanding and has a lot of responsibility, so it requires rich processing experience. In this case, it is not realistic for students who have just left school to do this position immediately.

It must go through a period of exercise, as short as one or two years, and as long as three or five years.

Clause. 3. CNC maintenance personnel or after-sales service personnel. The requirements of this position are higher, and it is the most lacking in the CNC aspect of the digging school.

It is necessary to have not only a wealth of mechanical knowledge, but also a wealth of electrical knowledge. If you choose this path, it can be very hard (such as frequent business trips), and you have to keep learning and accumulating experience. This position requires more training, so it will take longer to become proficient, but it will also be more rewarding.

Clause. Fourth, CNC sales personnel. The salary of this position is the most lucrative, and the professional knowledge required is not so much, but it requires outstanding eloquence and good social skills, which is not something that ordinary people can do.

Clause. 5. Similar majors can also be selected: mechanical design such as draftsmen, mechanical designers, structural designers; Processing technology management or on-site technicians, mechanical designers (mechanical engineers), CNC machine tool operators, mechanical equipment maintenance workers, mechanical equipment salesmen, programmers, mechanical technicians, inspectors, production administrators.

Employees in the CNC industry can be roughly divided into three levels:

1. Blue-collar layer: that is, CNC operation technicians, proficient in machining and CNC machining process knowledge, proficient in the operation and manual programming of CNC machine tools, understand automatic programming and simple maintenance and repair of CNC machine tools, such personnel have a large market demand and are suitable as CNC machine tool operators in the workshop, but because of their knowledge is relatively simple, their wages will not be high.

2. Gray collar layer: first, CNC programmer: master CNC machining technology knowledge and operation of CNC machine tools, be familiar with the design and manufacturing expertise of complex molds, and be proficient in 3D CAD CAM software, such as UG, Pro E, etc.; Proficient in CNC automatic programming and manual programming technology.

This kind of personnel is in high demand, especially in the mold industry, which is very popular and highly paid. Second, CNC machine tool maintenance and repair personnel: master the mechanical structure and electromechanical joint debugging of CNC machine tools, master the operation and programming of CNC machine tools, and be familiar with the characteristics of various CNC systems, software and hardware structures, PLC and parameter settings.

Proficient in the mechanical and electrical debugging and maintenance of CNC machine tools. The demand for such personnel is relatively small, but it is very difficult to train such personnel, and it requires the accumulation of a lot of practical experience.

3. Gold collar layer: belongs to the CNC generalist, has and is proficient in the comprehensive knowledge required by CNC operation technicians, CNC programmers and CNC maintenance and repair personnel, and has accumulated a lot of practical experience in practical work, with a wide range of knowledge. He is proficient in the mechanical structure design of CNC machine tools and the electrical design of CNC systems, and masters the electromechanical joint debugging of CNC machine tools.

Able to complete the selection of CNC system, design, installation, commissioning and maintenance of CNC machine tool electrical system. Able to independently complete the numerical control transformation of machine tools is a sought-after talent in enterprises (especially private enterprises), and its treatment is very high.

With the application of new technologies in China's mechanism industry, China's world manufacturing processing center status has been formed, the use of CNC machine tools, maintenance, maintenance personnel are very scarce in various industrial cities in the country, coupled with CNC machining personnel are very wide, can be in the modern manufacturing industry of molds, watch industry, hardware industry, small and medium-sized manufacturing industry, engaged in computer drawing, CNC programming design, machining center operation, mold design and manufacturing, EDM and wire cutting work, Therefore, the existing CNC technical personnel can not meet the needs of the manufacturing industry, and the talent market is not a large talent reserve, and it is more difficult for enterprises to find suitable talents in the talent market, so that mold design, CAD cam engineers, CNC programming, CNC machining, etc. have become one of the positions with the highest recruitment frequency in China's talent market.

Hello, I am glad to answer for you, CNC technology professional employment prospects, mainly including in industrial enterprises, engaged in CNC programming, CNC equipment use, maintenance and technical management, CNC equipment sales and after-sales service. CNC technology major is mainly oriented to machinery, mold, electronics, electrical, light industry and other industries, can be engaged in product design and processing, CNC programming, CNC machine tool operation, CNC common CAM software multi-axis machining, CNC equipment debugging and maintenance and other related work. Hope it helps

CNC technology is a set of mechanical, electrical, hydraulic, optical, computer, automatic control technology as one of the knowledge-intensive technology, it is the manufacturing industry to achieve modernization, flexibility, integrated production basis, but also to improve product quality, improve productivity of the indispensable material means. Japan, the United States, Germany and other industrially developed countries using numerical control technology to obtain economic benefits roughly as follows: operators reduced by 50, cost reduced by 60, machine tool utilization rate of 60-80, the number of machine tools reduced by 50, production area reduced by 40.

Due to the wide application of CNC technology in the world's manufacturing industry, ordinary machinery is gradually replaced by high-efficiency and high-precision CNC equipment.

The wide application of numerical control technology in the machinery manufacturing industry has become a powerful driving force for the development of the national economy. After joining the WTO, with the rapid development of the economy, China is gradually becoming a country'The world's manufacturing center'The numerical control rate has become one of the important indicators to measure the manufacturing technology level and economic strength of a country or enterprise (numerical control rate: the proportion of CNC equipment in the number of equipment owned).

At present, the numerical control rate of machine tools in China is only, while Japan is as high as 30, and the United States is more than 40. CNC machine tools have been widely used in developed countries, and the application and promotion of CNC technology in China is far behind that of developed countries. China will increase 40-500,000 CNC machine tools in a few years, and 60-800,000 CNC professional and technical personnel will be needed accordingly.

Employment Prospects for CNC Technology Majors:

1. The optional is the CNC operator.

Through the content of CNC machine tool apprenticeship and CNC operation training, students can be served, but the pressure of competition for positions in this job is greater, and all higher vocational schools in science and engineering have this technical major, not to mention the students of secondary vocational schools and their technical schools. At present, the CNC operation positions in China's machining industry have basically achieved saturation.

2. CNC programmer.

Many machining companies use CNC programming software to form CNC lathe machining program flow, so they need to learn CAM software. Different types of enterprises use different types of CAM software, and there are various types, but the general processing and production methods are not similar to Mu Cha, but the requirements for CNC programmers are relatively high, and the obligations are also very large, so it is stipulated that there is a wealth of production and processing work experience.

3. CNC maintenance staff or after-sales service personnel.

The requirements for this position are relatively high, and it is the most lacking at the level of CNC machine tools. It is required not only to have a wealth of mechanical knowledge, but also to have a wealth of electrical knowledge. If you choose this direction, it is likely to be very hard, and you must continue to learn and learn from experience.

This position requires a lot of training, so that the time to be skilled can be very long, but the benefits will be richer.

Employment direction of CNC technology major:

The wide application of CNC machining technology in the machinery industry has become a powerful driving force for social and economic development. After the addition of the WTO, with the rapid social and economic development, China is gradually becoming a "global manufacturing center", and the CNC machine tool rate has become one of the important factors to consider the technical strength and economic level of a country or unit's production and manufacturing.

At present, the mechanization rate of CNC lathes in China is only, while Japan has reached 30% and the United States has exceeded 40%. CNC lathes have long been widely used in capitalist countries, and the application and marketing of CNC technology in China is very different from that of developed countries in Europe and the United States. In China, 40-500,000 CNC lathes will be improved in many years, and 60-800,000 CNC machine tool skills must be required.

For mechanical manufacturing engineering and technical personnel, quality management engineering and technical personnel, mechanical design engineering and technical personnel, CNC process preparation and implementation, CNC programming and processing, CNC equipment operation, CNC equipment assembly and maintenance, intelligent manufacturing processing unit operation and maintenance, product quality inspection and quality control and other positions.