Samsung S6 back screen is broken, can it be repaired?

Let's start with the structure of the S6 screen.

The picture below shows the screen assembly of the S6. In order to achieve the effect of a curved screen, Samsung made the screen very thin.

It's only about half the thickness of an Apple 6.

This screen integrates glass + touch layer + LCD display.

Since it is very thin, it is tightly glued together with super glue.

The S6 Edge is still curved, so it is very cumbersome to separate.

If you're not careful, you'll have the entire screen scrapped.

So if the glass on the outside of the screen is broken, the touch and display are normal.

For most maintenance masters, it's the same look, so that you can change the whole thing.

Unless there are individual factories with low-temperature separators, gluing machines, and defoaming machines.

They can use the device to separate the glass of the inner screen from the outer screen, and then replace the outer screen with a new one.

In this way, although the process is complex, the cost can be saved.

The original outer screen is about 600, and a screen assembly is going to 1300.

I have been working in a mobile phone repair factory in Guangzhou, and I have a good understanding of these processes.

The picture below shows the external screen after it has been swapped out for reference.

Hello dear Samsung users:

In order to understand and solve the problems of your mobile phone in a more targeted manner, it is recommended that you send your mobile phone to the nearest Samsung service center for testing, and the service center will determine the specific problems and accessories of the mobile phone according to the test results.

It is recommended that you apply for "appointment to store" on Samsung's official website to enjoy priority repair services

After the appointment is successful, please bring your machine, invoice and warranty card to the service center where you made the appointment on time.

If the screen of the mobile phone is damaged and cannot operate normally, you need to connect to the computer to back up the data in the mobile phone, you can take the following methods:

1. If the phone can be turned on normally, the Samsung KIES software or the replacement assistant will back up contacts and other files through the computer. Different models of mobile phones use different PC suites, and you can also use other third-party mobile phone assistant software to back up attempts;

2. If the mobile phone cannot be turned on, you can bring the purchase invoice and repair card, and send the machine to the nearest Samsung service center, and the engineer will judge whether the data can be backed up after testing the machine on site.

Samsung S6 Black Screen After Water Ingress Solution:

1. Remove the water and quickly wipe it with a clean towel to ensure that the water does not flow into the pure port of the charging chain, headphone jack and other sockets. If you find that the water has flowed down the interface or gap into the inside of the hand-bound phone, you should carefully blow the water out with compressed air, and do not blow it deeper and deeper.

2. If the mobile phone is flooded with water or liquid, it is recommended not to try to turn it on to prevent damage to the internal components due to a short circuit inside the machine.

3. It is necessary to conduct on-site inspection of the S6 Edge mobile phone in order to make specific judgments.

4. In order to understand and solve the problems of the mobile phone in a more targeted manner, it is recommended to send the mobile phone to the nearest Samsung service center for testing, and the service center will determine the specific problems and accessories of the mobile phone according to the test results.

1. After the Samsung S6 mobile phone is strongly squeezed or squeezed, it may be illuminated by the virtual soldering, short circuit, partial damage of the screen or virtual connection of the cable base.

2. If you continue to use it without detailed inspection and maintenance, it may be squeezed or damaged again, resulting in the final damage to the machine hardware.

3. So I suggest that you send your phone to the nearest Samsung service center for testing and repair.

Samsung S6 Black Screen After Water Ingress Solution:

1. If the mobile phone is flooded with water or liquid, it is recommended not to try to turn it on to prevent damage to the internal components due to a short circuit inside the machine.

2. It is recommended to bring the machine to the local Samsung after-sales service center and be tested by the engineer.

If the screen of your Samsung phone is displayed abnormally, it is recommended to:

1.Restart your phone and try.

2.If it is invalid, please bring the purchase invoice and the three-guarantee certificate to send the mobile phone to your nearest after-sales service center for testing.