What should I do if my phone camera doesn t work?

If you are using a vivo phone, the camera cannot be used as follows:

1. If the software can't open the camera, go to Settings - Application and Permissions More Settings - Permission Management - Find the corresponding software - Turn on the camera, and turn on the "Use Camera" permission in Single Permission Settings;

5. Firmware upgrade;

6. If the above methods are not solved, you can bring your mobile phone and valid purchase voucher to the customer service center to deal with, pay attention to WeChat *** "vivo" or "vivo customer service" to inquire about the address of the service center**, it is recommended to contact before going to ensure that there is a staff reception and then go over, so as to avoid delaying precious time and running in vain.

According to your description, please try to find the camera in your phone's settings - Application Manager, clear the data, and then return to test whether the camera can be turned on normally, if the camera still cannot be turned on, it is recommended to back up the data and restore the phone to factory state. Phone Settings - Reset - Factory Reset can be.

According to your description, it is recommended that you try it as follows:1It is recommended to go to Settings - General - Application Manager - All - Camera - Clear Data Attempt.

2.Check whether there is a software program such as Mobile Security Guard installed on your phone, and if so, try to uninstall it to see if the third-party software installed is incompatible or caused by software limitations. 3.

Take out the external SD card for testing. 4.Back up the data on your phone, factory reset your phone and try to install it.

5.Test after updating the firmware version of your phone. If the problem persists, it is recommended that you <> your phone

Take it to your nearest service center for testing.

Answer 1: It may be that the mobile phone has been used for too long, which makes the mobile phone stuck and the program malfunctions. This situation can be solved by restarting the phone, and you can also clean up background apps, free up the phone's memory, and make the phone's camera program run more smoothly.

2. It may be a system failure caused by the recent flashing of the mobile phone, and many flashing systems are self-developed small programs, which may lead to incompatibility of hardware and software. The solution is to flash back the official software, or find a compatible system. Or let the phone reset and restore the factory settings, format the phone, and the system will generally return to its normal state.

3. It may be because of the program compatibility problem of the newly installed camera image software, resulting in a conflict between the mobile phone programs. In this case, you can restart the camera software of the mobile phone or restart the system of the mobile phone, and you can also enter"App Manager"on your Mac, clear the data of your phone's camera app, uninstall the newly installed software, and then try to open the camera to take photos.

Hope it helps.

The mobile phone album can't be used, there may be these reasons, one is that the mobile phone system can't keep up, the phone itself has a certain problem, or you haven't set up the permissions, you can turn on the option to take pictures on the setting camera.

If your camera won't turn on, follow these steps:

1. Restart the device.

Some apps do not release the camera properly after using the camera, resulting in the system camera not starting normally. Please restart your device and try it again.

2.Check to update the system version.

3.Clear camera data.

4.Third-party apps don't get the Camera permission.

If you can turn on the system camera separately but cannot open it when you use a third-party app, the third-party app may not have obtained the camera permission. It is recommended that you go to Settings, search and enter Permission Management >> Click Camera to enable the camera permission of the corresponding app.

If none of the above operations solve your problem, it may be a hardware problem with the camera, so please back up your data (third-party apps such as QQ and WeChat need to be backed up separately) and bring your purchase voucher to the Huawei Customer Service Center for testing.

Make an appointment for service. Boarding service.

Repair spare parts** inquiry.

If your camera cannot take a photo, please follow the steps below:

1.Check that you have an app that uses the camera open.

The Android system requires that only one app can open the camera at a time, and when another app opens the camera, the camera camera will not open. Some applications may not release the camera in time due to their own design. Such as flashlight, *** scanning and other programs.

You can close camera-related apps before entering the camera attempt.

If you can't tell what app it is, you can restart your phone and try again.

2.Clear camera data.

3.Check third-party app permissions.

4.Use the Smart Detect feature to detect the camera.

To check the test on the mobile app, go to the My HUAWEI app> Service app, touch I want to test > to enter the test, and follow the prompts on the phone to complete the test. If there is a hardware problem with the camera, please back up your data and bring your proof of purchase to the Huawei Customer Service Center for testing.

5.Factory reset your device.

1. Hardware problems, poor contact between the mobile phone camera and the motherboard, and the motherboard cannot work normally with the camera.

2. Generally, it is a little loose, the quality of the copycat machine is not very good, there is often such a problem, gently press the camera lens before turning on the camera, and then open it to try, try a few more times, and generally can resume work.

3. Avoid squeezing and falling to the ground, etc., which is the easiest to break the camera.

4. Go to Settings to find the camera's program in App Management and clear the camera's cache data, then restart the phone.

5. Enter the recovery system of the phone to clear the setting data and cache data, and brush the two options separately once to solve the problem.

If the mobile phone camera is suddenly unusable, you can eliminate external reasons, such as falling and squeezing, etc., you can deal with it like this to see 1. Clear the cache data and eliminate whether the fault caused by the cache data of the camera program.

2. If the problem still persists, restore the factory settings of the phone. Troubleshoot whether the software is causing the fault.

3. If the problem is still not solved after restoring the factory settings, you can upgrade the system or flash the machine.

4. Finally, it may be a hardware problem with the camera component. It needs to be sent to a nearby repair shop or after-sales professional testing mobile phone for processing.

Restore the factory settings, the problem is still not solved, you can perform a system upgrade or flash the machine.

You can restart it and it will return to factory settings, try it.

There is no way to have an ID machine, so you can only decode. 6S is now the second-hand market price of about 1000, can not find the owner, it is recommended to sell the salted fish when the accessories! Around 400! Nima answers the question and dividends

Answer: Pro [Touch] [Touch] can only be restored by resetting factory settings, go to the phone settings, tap General, tap Restore at the bottom, and select what you want to restore. Factory settings are restored to the default state at the factory time, such as start interface, standby mode, operation shortcuts, timing reminders and other functions are restored, and the saved parameter settings are cleared.

Ask how to operate the iPhone.

1. First of all, check whether it is a software or hardware problem, and the software problem can be repaired to the mobile phone;

2. During the warranty period, the warranty will be sent, and the manual replacement fee can also be exempted;

3. Send it to a mobile phone repair shop for repair, which is cheaper than after-sales service;

4. If you have manual ability, you can buy the corresponding lens module online and replace it yourself.

If the phone is broken, you can only find after-sales service. Your camera doesn't work. It's not just a matter of procedure. Maybe it's a problem with the camera's hardware. It's better to find after-sales directly.

Reply u03296274

Hello to the post landlord! What did you do with your phone before? Please also go to your phone's Settings - Program Management (App) - All, find the camera, and clean up all the data and cache

View the original post

There are several situations in this situation: 1, the mobile phone camera lens is blocked, such as the mobile phone case is not suitable, etc., the treatment method can expose the lens, 2, the mobile phone ROM is problematic, you can restore the factory settings or re-flash the ROM, you can also go to customer service 3, the mobile phone hardware failure, it is recommended to go to customer service for repair, warranty.

1. The cause of the failure of the mobile phone camera.

1. Flashing leads to many friends now using smart phones. After using it for a while, I don't know why I like to flash the machine. However, many ROMs are mostly developed by the private sector, which may lead to hardware incompatibility.

2. Root causes the smartphone to delete the system software of the mobile phone after obtaining the root permission. Therefore, when there is a mobile phone camera failure, it is likely that the phone with root privileges has deleted its own camera.

3. If the mobile phone accidentally falls on the ground or falls into the water due to accidental damage, it is very likely that it will not be opened when you want to use the camera when you turn on the mobile phone. This glitch may be caused by the destruction of the lens after the phone was bumped.

4. Because the position of the mobile phone camera is very close to the CPU, using it for a long time without letting it rest will cause the boot to be too hot, which will cause the mobile phone camera to malfunction.

Solve the problem of mobile phone camera failure.

Solve the problem of mobile phone camera failure.

Second, the solution of mobile phone camera failure.

1. Check whether it is a software or hardware problem. Software problems can be fixed by flashing the phone, but it should be noted that the official ROM should be used to flash the phone or find a compatible ROM; If there is a hardware problem, you need to take it to a mobile phone repair shop to be checked by professionals.

2. Open the phone's settings interface, find "Application Manager" in the settings interface, and find the camera in the list after opening. After clicking on the camera, find the clear data (generally only a few k), and then click Clear Data, and the camera function will be restored after restarting the phone (clearing data will not delete the saved **, users can operate with confidence).

3. If the phone camera can't be turned on for no reason, then you can try to format the phone and then restore the factory settings. Note: Before you do this, remember to save or back up the important information on your phone.

4. If flashing and restoring factory settings are not possible, then you can only send it to the after-sales outlets for maintenance.

The camera doesn't work or it just does.

The pre-installed program of the system has been deleted.,I don't know if your phone is rooted.。。 There is also a camera.