The computer expert is here, and he is seeking knowledge with high scores

1.Your configuration is a very good set of configurations for now, and you don't need to upgrade it yet!

2.Please reinstall a driver, if you install the system with its own driver, then please uninstall the driver, and then reinstall the latest driver of your motherboard graphics card (you can go to the driver home or the official ****).

3.Go to the BIOS and set the optimal value, please refer to the motherboard manual for details.

4.Make sure the power supply is sufficient, go to a friend to borrow a better power supply to replace it and see if there is such a phenomenon.

5.Pay attention to heat dissipation! Use ASUS's built-in temperature control software to see what the CPU temperature is, especially when the computer card is at its fault, which can be found on the motherboard.

6.If none of the above can help you, then you can only take it to the merchant and let him test it for you, if it is a hardware quality problem, please replace it immediately!

There are no conflicts! It is recommended that you use NOD32 to kill viruses in safe mode. NOD32 is my most trusted anti-virus software, and it's definitely not a loss to buy a genuine one! ）

But I guess you'd better rework the system (kill a pom before reworking the system) Your configuration is good, if you use Vista, add another 1G RAM (it's cheap right now!) CPU is not the mainstream now, there is no future, with core2e6600 or more.

First, you have too many startup items on your computer! (reduced to less than 5) Second, cookies are not cleaned up for a long time! (Delete cookies and offline files in a timely manner, Internet access records).

Third, the anti-virus method is wrong! These three points are enough to restore your computer.

Is it too hot for the CPU to dissipate heat?

Does it turn off automatically?

If it is, it will be a heat dissipation problem!

And then there's poisoning! You've learned a little bit, but viruses are getting more and more diverse! Sometimes even computer repairers are depressed!

Or too many junk files on the C drive will also cause the system to run slowly! (But you'd better not delete it indiscriminately, if you delete the system files, you'll be depressed!) Otherwise, you can restore the system or reinstall it!

Furthermore, the graphics card driver is not installed properly?

Oh, there's a lot more to say tired! I can't think of .. for a whileI can't see the machine, and I can't make a conclusion, your machine configuration is good, but I don't know if there will be a quality problem, hehe!

I also play Warcraft, and I also study animation, and I do some 3D. You play Warcraft, and your CPU is the same as mine for doing 3D renderings. You've got a good graphics card.

The machine configuration is okay but not the mainstream configuration, your board is 945, and the cpuintel Pentium D925 is not bad to do things No problem. If you want to upgrade the mainstream, you have to change the board to 965, although you also support Core, (if you have money, it's still 965,) CPU gets Core, plus a memory, CPU usage often reaches more than 70% ?

1。The system is not doing well, 2. There is a Trojan virus that occupies your 360 kills (playing Warcraft, and doing 3D renderings also accounts for a lot).

3 。Poor contact, poor memory contact, (there is a lot of dust at the gold finger, and there is a lot of dust in the chassis Clean it up, the new machine generally won't be right, haha).

4. The power supply is unstable, (how many watts of the chassis power supply) or the external voltage is low 5 The new machine will generally not break the memory, unless it is a quality problem or the contact with 3 is not good, check it first and slowly rule it out.

Very well configured.

Nothing compatibility issues!

With PD's CPU, the heat generation is too great. Check the temperature of your CPU...

The CPU is too hot. Running some small programs will take up a lot.

It feels like the motherboard might not work. The P5PL2-E chip is a bit problematic, and the 945 may come up with 915 liters. Or it is a parallel import, which makes the transmission of CPU and memory, and hard disk unable to play a performance.

It has long been rumored that this 945 pair of serial port transmission, the memory frequency is a bit problematic. Your machine is new, it is recommended to try to change the motherboard first, don't pass the warranty period, it will be difficult to do in the future, you are also engaged in assembly because you should know**.

The configuration is no problem, and it will not be obsolete for at least a year. But your U is too old-fashioned Motherboards only support 1066 FSB, and they are the least cost-effective option. However, I personally think that it will not be stuck, or even crashed.

It's only possible that 1GB of RAM is not reasonably allocated to you.

For example, considering the specifications of the 86GT, Vista = 1G.?, which runs barely smoothly, is used

Hit Warcraft in XP, and opened QQ and web cache. Plus the background program itself is not very well optimized = 1g.?

What brand do you have in memory?

Try this: DiskGenius (works under DOS) 1: With DiskGenius software, you can view any file within the partition without being restricted by the operating system.

Under normal circumstances, in order to protect the security of important files and maintain the stable operation of the system, the operating system hides many files from users from seeing. When displaying the file list, this software adopts the method of directly analyzing the file system format and directly reading and writing disk sectors, so it is completely independent of the operating system. You can view all the files in the partition.

2: DiskGenius software provides the feature of "Force Delete Files". It can bypass the file system driver and delete files by writing directly to the disk.

It can delete files on partitions other than the system partition. The delete file feature can be used to delete files or folders that cannot be deleted under normal circumstances.

3: Some functions may not be completed under Windows system, and need to be operated under DOS system. This software provides a function to boot directly to the DOS system under Windows and run the DOS version of DiskGenius software.

There is no need for a separate boot CD, boot USB stick, or DOS system installed on the hard disk. After launching and running the DiskGenius for DOS, the hard disk partitions you see through the DiskGenius for DOS software are exactly the same as those you see under Windows. When you restart your computer again, it will still boot into your existing Windows system.

Direct use of various first aid kits, such as 360 first aid kit, Keniu first aid kit, Jinshan first aid kit. If it doesn't work, use each of these three first aid kits.

I don't do a system. Then you go to PE to kill the virus.,And then sift through the hidden files under each disk.,The registry is estimated to be clear.,Let's do it.,At least for an afternoon.。

Press F8 when you boot up, then select Enter Safe Mode Use 360 to check for viruses in safe mode.

This is typical of poisoning.

One-click restore, one-click restore is backed up.

You accidentally deleted a file, which is your computer's graphics card driver, and you can re-drive it.

1) If it's a router issue.

If it was originally usable, it can't be used for the time being, and my own practice is to disconnect the power of the router and plug it in, and I'll see. After there is a factory reset, it can be used from the new settings (this is on the premise that the physical connection is correct).

If it can't always be solved, it is recommended to call the customer service of the router**, they have **** guidance, I encounter problems that I can't solve myself, it is very useful to consult the advice they give, and they will give correct suggestions for your settings or operations.

2) First of all, directly connect to the broadband network cable for testing, if it is a broadband problem, contact the broadband customer to solve the problem.

3) If it is caused by a system problem, it is recommended to restore the system or reinstall it.

Use the system that comes with the system restore method:

The system comes with the system restore: "Open the imitation of the collapse of the beginning" "Programs" "Accessories" "System tools" "System restore", click "Restore my computer to an earlier time", press Next, you will see that the date page has a dark date, that is the restore point, after you select, click the next step to restore (win78 restore the system, right-click on the computer to select attributes, on the right side to select system protection, system restore, follow the steps to do it, if there is restoration software, you can also use the software to restore the system).

4) If you have any questions, please ask me.

It is the C drive boot error and needs to be rebooted.