How to inspect the Qashqai automatic transmission in the second year?

Landlord: For the description of the above vehicle phenomenon, the vehicle condition and maintenance cases in this environment, there should be no problem with the car inspection index, if you ensure that there is no problem, it is recommended to go to the maintenance shop to check the throttle voltage value and the air-fuel ratio of the control unit, if the voltage value is too high or the air-fuel ratio is beyond the standard range, then the air intake system and fuel injector can be cleaned, I wish you a smooth pass.

For the above vehicle phenomenon description, the vehicle condition and maintenance cases in this environment, there should be no problem with the car inspection indicators, if you ensure that there is no problem, it is recommended to go to the maintenance shop to check the throttle voltage value and the air-fuel ratio of the control unit, if the voltage value is too high or the air-fuel ratio is beyond the standard range, then the air intake system and fuel injector can be cleaned, I wish you a smooth pass.

Hello, take the driving book and the insurance documents for the first and second years, and go directly to the local vehicle management office hall to handle it, and receive the annual inspection standard and environmental protection standard. Now the car is exempt from inspection for six years.

I hope my answer will be helpful to you [If you have a question about the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello, what year car are you? If it is a new car, it is inspected once every two years, and you can go to the traffic team to get the word check, which is free, and you need to inspect the vehicle online from the sixth year.

Hello. It is only necessary to inspect once a year in six years and go to the testing line. Just go to get the annual inspection standard every two years.

Yes, as long as it is not more than a year, it can be inspected.

If you should go and don't go, you will be fined now.

Qashqai automatic transmission car bai

There is no clutch pedal, and the speed of the car is controlled by the accelerator and brake, and the brake pedal will be changed

The first step is to prepare before the car. After getting into the car, check whether the equipment is working properly, and try it without the power on.

Step 2: Prepare to get started. Find the brake pedal and press it.

The third step is to start the car. The joystick is in D gear, and the car starts moving forward after releasing the brakes.

Fourth, the car accelerates. If the Qashqai needs to accelerate, it must follow the essentials of "upshifting in advance and downshifting behind behind". When the rev reaches a certain level, you can accelerate by pressing the throttle.

Step 5: Parking the car. If the car encounters a red light or traffic jam, it needs to stop, and the lever should be changed to N gear when the car is stopped for more than 30 seconds.

Step 6: Turn off the car and turn off the car. After the Qashqai car stops running, turn off the power start button to completely turn off the power of the car.

First of all, I will introduce the name of the copy gear, P parking BAI gear is the parking of the manual DU gear, pull the handbrake.

nNeutral dForward, R Reverse, l, low-speed DAO, 1st gear, S engine, low-speed braking gear, 2nd gear, 3rd engine, medium-speed braking gear, 3rd gear, 3rd gear.

Let me introduce how to drive.

1. Start the engine.

2. Apply the brakes. 3. Gear (put your desired gear forward or reverse) 4. Release the brake (release the brake and go).

If you want to stop, apply the brakes and hang it in neutral or park.

Start and start.

When starting an automatic car engine, you must place the gear selector lever in P or N gear and tighten the hand brake or press the brake pedal. When starting an automatic transmission car, you should first press the brake pedal, after the gear, release the hand brake, and then lift the brake pedal smoothly, and then gradually press the accelerator pedal after the car starts slowly. Novice automatic car driving skills remind attention:

After the engine starts and before the car starts, do not press the accelerator pedal; When gearing, do not release the brake pedal; After starting, the accelerator pedal should not be pressed too quickly or too hard, but should be pressed slowly.

Flat road driving. When driving, you can put the gear selector lever in D gear and automatically change gears according to the size of the throttle and the speed of the vehicle, so you can move up to high gear as long as you start in D gear and increase the throttle opening. Novice automatic car driving skills suggest that the correct operation is to "close the throttle to upshift in advance, and step on the accelerator to downshift in advance" after the speed reaches a certain value.

Drive on ramps. For general small ramps, the accelerator pedal and brake pedal can be used to control the uphill and downhill speed of the car in D gear. In case of long steep slopes, novice automatic car driving tips emphasize that the gear selector lever should be shifted from D to S or L (depending on the slope). In this way, it can avoid the automatic transmission "cyclic jumping" (continuous downshifting and upshifting) caused by the lack of power in the high gear when going uphill in D gear, which aggravates the wear and tear of the automatic transmission shift actuator, and when going downhill, the idle speed of the engine can be used to control the speed of the vehicle in S gear or L gear.

Dirt roads. At this point, the selector lever should be moved from D to S or L. For automatic transmissions with a drive mode selection button, it is also possible to change the driving mode according to the road conditions and then manually shift into the appropriate gear.

Hello, there is no particular order to start.

Generally, it is started on the bus. Hang d and release the brakes to start.

Just drive normally, hang D gear and step on the accelerator to go forward, hang R gear and step on the accelerator to retreat, step on the brake to stop, and then hang P to get out of the car and leave.

All Qashqai cars do not have the automatic window lifting function, and sloppy riders will often forget to close the windows after locking the car, resulting in things being stolen in the car or getting wet in the car when it rains. An automatic window lifter is installed. After installation, I found that the effect was super good, and the installation process was recorded, hoping to help the riders who need it!

The installed automatic window lifter has the following functions:

1. Close the lock, and the windows of 4 doors are automatically closed; (If the window is not closed after getting out of the car, the window will be automatically closed when the lock is closed, and the window will not be raised when the lock is closed during driving or the automatic lock function of the original car).

2. Add the window lifting pause function (in the process of automatic window lifting, press the remote control unlock button 1 time to pause the window lifting, and then press the lock button to continue to close the window).

3. Realize the function of one-key window lifting of the left and right front door windows; (Buckle the left front on the main driver's door, and the right front window lift switch will be released immediately after about a second, and it will automatically rise to the top, without affecting the function of the original car to rise as much as you want).

4. Add the remote control window lowering function (remote control window lowering operation method: 1. The operation mode of the original car with continuous unlocking signal: pressing the remote control to unlock 2 times in 3 seconds, and automatically lowering the two front windows.

2. The operation mode of the original car without continuous unlocking signal: within 3 seconds, press the remote control unlocking + closing + unlocking, and automatically lower the two front windows).

Automatic transmission means that the driver does not need to manually change gears, and the vehicle will automatically choose the appropriate gear according to the speed and traffic conditions.

There are six gears on a general automatic transmission car, from top to bottom: P, R, N, D, 2, and L.

Automatic transmission vehicles use an automatic transmission that uses a planetary gear mechanism to change gears, and can automatically change gears according to the degree of accelerator pedal and vehicle speed changes.

The power of the engine is transmitted through the gearbox, which is also a key indicator of fuel consumption, and generally speaking, the fuel consumption of automatic transmissions is more than 10% higher than that of manual transmissions. Whether it's a manual or automatic transmission, the more gears you have, the more fuel-efficient.

Manual automatic transmission. It allows high-performance sports cars to be free from the constraints of traditional automatic transmissions, allowing drivers to enjoy the fun of manual gear shifting. This model has a "+" selection gear on its gear.

In D, you can freely change downshifts (-) or upshifts (+) as in manual gears.

Some automatic transmission cars have added "+" and "-" shift buttons to the steering wheel, so that the driver can add and decrease gears without leaving the steering wheel.

The automatic transmission +- mark is a manual automatic transmission, which belongs to a kind of automatic transmission, but the function of manual shift is added on the basis of automatic transmission, and the two are not much different in nature.

As an example of the manual mode in the manual mode of the automatic manual system, first press the brake and pull the gear down to engage it"d' gear, then push the gear lever to the left until"s"When you need to increase or decrease the gear, push the gear lever forward to upshift and pull backward to downshift. Note that when the vehicle speed and engine speed are not as required, the gear cannot be raised, and each step of the operation must be allowed by the transmission control unit. In manual mode, when the speed is low, the transmission will downshift but will not actively upshift.

Dial back to the right to resume the automatic mode, manual and automatic can be switched at any time, no brake is required, and the throttle can not be loosened.

Qashqai automatic transmission that +- is said that the transmission is manual and automatic in one.

It can be used manually or automatically, and it is a new type of transmission.

1. If the road is bad, you can use the manual gear, which is more vigorous.

2. If the road is better, or when running at high speed, you can use automatic transmission, which is more effortless.

It means to increase and decrease the gear in manual mode, and it is an automatic manual transmission.

It should be the manual mode in the manual automatic --- plus and minus prompts.

Yours is a hand self-integrated, that +- is you hooked to that gear, push forward is to increase gear, push back is downshift.