-
1.The power of the inverter must be greater than the rated power of the electrical appliances used, considering that some electrical appliances have a larger current when starting, the inverter with a larger output power should be selected 2The DC voltage of the inverter and the electric frequency voltage should match the battery on the street when the inverter works, the inverter has indicated the DC power supply (such as 12V, 24V, etc.), then the battery voltage you access must be consistent with it, the inverter voltage is DC12V, then your battery voltage must also correspond to 12V, otherwise the inverter will not work or be damaged 3
The positive and negative poles must be connected to the positive pole of the inverter to the positive pole of the battery (red), and the negative pole of the inverter to the negative pole of the battery (black) 4Charging (some users may not need this function) press the mains power at the AC input, connect the battery and the inverter correctly as required, connect the positive electrode to the positive electrode (red to red), and the negative electrode to the negative electrode (black to black), close the relevant switch, the machine can automatically charge the battery, and automatically turn to floating charging after sufficient. At the same time, this machine has an automatic bypass function, when the mains is input, it can automatically bypass the output to the load, and when the mains power is off, it will automatically turn into an inverter output, and the uninterrupted power supply to the load 5
When the inverter is used without mains input, the battery and the inverter are correctly connected as required, the corresponding switch of the panel is closed, and the inverter outputs alternating current to supply the electrical load.
-
The use of the inverter is based on the use of the instructions in it or the installation is more convenient, and everyone likes to use it very much.
-
An inverter is a device that converts direct current into alternating current. It consists of an inverter bridge, control logic, and filter circuitry. Based on safety and performance considerations, the installation environment should have the following conditions:
1. Drying: Do not soak in water or rain. 2. Shade:
The temperature is between 0 degrees and 40 degrees. 3. Ventilation: keep no foreign matter within 5 cm of the shell.
-
Answer: The use of the inverter is as follows: 1. Place the converter in a flat place and make sure the switch is off; 2. Connect the red and black wires with the red and black binding posts of the converter respectively, and clamp one end with the clamp on the positive and negative poles of the battery respectively (the red wire clamps the positive pole of the battery, and the black wire clamps the negative pole). If a cigarette lighter plug is used, insert the plug into the cigarette lighter jack; 3. Insert the power plug of the appliance into the AC socket; 4. Turn on the converter switch and you can use it.
-
The inverter uses the normal way of using the inverter, that is, it does not start when there is power, if the inverter is automatically put into operation after the power failure, the direct current is converted to alternating current for power supply.
-
1. The voltage of the battery must be consistent with the DC input voltage of the inverter.
2. The output power of the inverter is larger than the use power of electrical appliances, and there is a large margin for some electrical appliances with large starting power.
3. The positive and negative poles of the battery should be connected correctly.
4. Charging and inverting cannot be carried out at the same time.
-
In the case of inverters, it is recommended to see if there is a fault in selecting this model when you connect or if there is an error in the operation when you contact.
-
If you want to use it, then I'll borrow it first, and generally there is an instruction manual. You just need to follow the physical instructions.
-
The current use of inverters is still considered to be very good, and the use of inverters can still be very good.
-
If we don't know how to use this, you can open the manual, and what he says in the manual is actually very.
-
The roommate of the inverter, she has to use it to clean it again after using it correctly.
-
The use of an inverter is to turn its voltage into plus or minus.
-
The function of the inverter is mainly to turn DC into AC to run the equipment.
-
It's good to ask you to send the apartment over there must not be more than 10 cm.
-
The use of the inverter, the use of the inverter has not been used, I dare not talk nonsense, only the general one has a manual, and you can operate it according to the manual.
-
When the time comes, it's normal for you to adapt, and it's just that different requirements have different effects.
-
Just follow the instructions when you go.
-
It's the transformation into a person's personality and the like.
-
If you use it several times, then you have to find a professional to see how to use it.
-
Even if you use this, you'd rather try it or go to a professional place to find out.
-
If you want to use the meter, whether it has a manual in its guarantee, and then do it according to this manual.
-
The inverter is a kind of switching power supply, the internal use of 40kzh high-frequency transformer through the power tube to promote the original DC power supply into 50zh AC signal power supply, the manufacturer has Chengdu Wanxin Technology **** under the name of the (Hongtai) well-known brand Hongtai inverter configuration is relatively high The pure copper wire transformer used, the whole circuit is in-line, performance, *** many. Strong anti-interference ability.
-
In layman's terms, an inverter is a device that converts direct current (DC) into alternating current (AC).
If you need it, you can go to the No. 8 hall of Chengdu Wanguan Hardware and Electromechanical City, enter from the No. 12 rolling shutter door, go straight 20 meters, and Yuechuan Electromechanical to see.
-
Zinc Hongxiang pure sine wave inverter, talking inverter, perfect protection function, high quality and low price service!
-
A device that can turn a DC power supply into alternating current, mainly to reverse the DC battery into alternating current, and can also use it to charge the battery.
-
Turning DC into AC can be used in normal life!
The first thing to do is to determine whether it is on-grid or off-grid. In addition to the configuration of the inverter, it should be determined according to the technical indicators of the entire photovoltaic power generation system and refer to the product sample manual provided by the manufacturer. Generally, the following technical indicators should be considered. >>>More
Thanks to the inverter.
The internal MOSFETs are turned off when not working, and only the internal parasitic diodes. >>>More
Of course, home decoration is inseparable from ceramic tiles, so tile adhesive is indispensable. It's just that tile adhesive can't be used indiscriminately, are you doing the right way to use the following? 1. Apply the glue to the working surface with a toothed scraper to make it evenly distributed and form a toothed shape. >>>More
Steps to use a Feng Shui compass When a Feng Shui compass measures the direction of a fixed object: Step 1: Hold the compass flat and close to or parallel to the edge of the compass object. >>>More