In a hurry, the notebook got into the water, and the notebook got into the water

Last time, I helped my classmate repair HP's notebook, and it was also a water ingress problem, he was more serious than you, and he couldn't turn on the computer. Later, I went to the computer city to repair the motherboard. It seems that your problem is not very big, you dry the laptop first, it is better to blow it off with a fan.

Don't turn it on, turn it on again after 2 to 3 days, and see if the keyboard is good. If you still have a problem, you need to change the keyboard.

When you go to the after-sales service, don't say that it is watery, just tell him that you don't know anything, and it will be broken. It will usually be fixed for you.

It doesn't matter if it's a mobile phone or a computer.

If it cannot be turned on immediately in case of water, it should be dried.

No need to change keyboards.

You wait first. If it doesn't work, it is recommended that you go for repairs.

There is nothing wrong with the motherboard, in fact, there is no problem with the keyboard, but the water has not evaporated and dried up, so there is a phenomenon of joint construction. You can put your computer in a dry place. In this way, there will be no such phenomenon in a few days.

My computer is like this too.

Generally, notebooks are waterproof, which is so easy to break. It's that the water hasn't dried up, so it'll be fine after a while.

1.Yours is "man-made damage" and will be charged regardless of whether you are under warranty or not.

2.Judging from the problem you described, there should be no problem with the other hardware except for the keyboard.

3.If you can, you should turn off the power, remove the battery, and leave it for a day or two without touching him. The reason for this is because there are a lot of small parts under the keyboard, it is easy to have water accumulated in it, and it can't be wiped, and the water in the gap can evaporate naturally after a few days, and the problem of connecting keys may be solved.

4.If the problem persists after a few days, the only way to do it is to send it for repair. The keyboard of each machine is different, but a few hundred yuan is certain, and you still need to contact the maintenance station to know that the accessories from the maintenance station must be very expensive.

You can take it to the repair station for an inspection first, and the inspection is free of charge. If you are sure that you want to replace the keyboard, you can first ask the maintenance station**, and then you take the machine to other places to repair the notebook and ask them the keyboard**, Dobibi, choose an acceptable one** to change it. After all, the keyboard is not very technical, and it doesn't have to be bought at the workshop.

Find a way to dry the water in a dry place or just take a hair dryer to dry it.

If there's still a problem, then you might have to take it and change it.

Water ingress into the computer often happens as long as it's not very serious, and it's usually fine.

Don't be afraid, don't be afraid, this kind of problem you put a thousand hearts, there is water seeping into the keyboard, before it was unusable because water will also conduct electricity to short-circuit some circuits, resulting in failure to work normally; And at night when you use it again, you can use it, but there is still a key phenomenon, and the water has dried up partially, and it has not completely dried, which means that the hardware is fine, of course, there is no problem with the keyboard, no need to change the keyboard, my notebook has also had such a thing, and then the water dries and is fine, it is recommended that you still use a hair dryer to dry the water and then turn on the machine, don't be in a hurry to play. After all, your machine is still under warranty, and you definitely don't want any problems. Remember that it's not okay to play in a hurry, bear with it and good luck!

Water is the most direct killer of laptops, but there are also many people who tend to overlook many potential "water". As you know, the motherboard of a notebook is much more integrated than that of a desktop due to its small size, which leads to a relatively high production cost. If an accident occurs on the motherboard, the cost of replacing the motherboard generally accounts for about one-third of the whole machine, because this kind of accident is generally a man-made fault and is not included in the warranty, so the repair cost can be said to be jaw-dropping.

The motherboard maintenance cost of high-end products will be more than 5,000 yuan.

How can I avoid being hurt by water killers? First, keep the environment in which the laptop is used dry. Second, try to keep a certain distance from water while using the notebook, such as drinking tea while using the notebook, using the notebook when your hands are wet, etc. are all bad habits, and it is easy to let the notebook get into the water, thereby damaging the notebook.

Water ingress is very easy to damage the laptop motherboard In the event of a sudden situation that causes the laptop to get water, we must not panic. First of all, I want to press the power button as fast as possible to cut off the power (don't shut it down in the usual way, otherwise your motherboard may have been short-circuited and burned.) Then, remove the laptop's battery (this is the first one that needs to be removed, and the action must be fast) so that the battery does not continue to power up the motherboard.

Immediately tilt the notebook over, let the liquid flow out as much as possible, the author has seen some articles say that the notebook is dried with a hair dryer, it seems that some friends follow suit, the author thinks, this method can not be used, you may not have seen the internal structure of the notebook, now there are basically a lot of plastic components inside the notebook, if the hair dryer blows, it is easy to cause these plastic components to be heated and deformed, making the situation worse, even if you want to blow it must be blown with cold wind.

We can leave the laptop in a ventilated place to dry in the shade for three or four days to allow the moisture in the body to evaporate naturally. After three or four days, we put on the battery, plug in the power supply, and try to see if we can turn it on, if not, then we can only send it for repair. Some friends may splash water on the keyboard, compared to the front motherboard water can be said to be more lucky, in order to prevent water from further damaging the keyboard printed circuit, we should immediately shut down the power to cut off the power supply, and remove the battery.

Then turn the laptop upside down at 180 degrees, and let the water in the keyboard flow as much as possible. After the water is completely clean, turn on the device again to see if all the keycaps are fully effective. If you're unlucky and something happens to the motherboard, you'll have to send it to the repair station for repair.

I encountered this situation once when the laptop got into the water, and it really scared me to death at the time, but luckily I took the right measures in time!

It should be unplugged immediately! Don't worry about the normal shutdown! Otherwise, it will die, open the notebook 180 degrees and turn it upside down for a few days.

Avoid!!! Don't turn it on! Because at this time, you can't be sure how much water has gone into the internal parts, if the water really enters, the motherboard CPU will burn out as soon as the power supply is turned on.

Then send it to customer service!

The last time I went to Lenovo customer service, the staff said, I took the right approach, they said, if you really have a serious problem, then your sister turned on the computer the moment the computer burned! I can't start it! Now if your sister's boot system is still starting normally, then the problem is not very serious, there is still a way, don't use the computer again!

Leave it to dry and send it to customer service as soon as possible! They will check it thoroughly for you, and the customer service of each brand has an engineer to help you solve it! Send it away!

Don't delay! Good luck with your computer!

There is also salvation. Repair can still be used. It's like what you say, so many typos. I can still understand ...

Dry carefully with a hair dryer, good luck and be careful next time! Don't drop it in the toilet, hehe, just kidding, don't be angry!

In this case, it is best to send it to the warranty point as soon as possible, it will not be gone, rest assured.

Buy it again, otherwise you won't be able to use it, and you won't be able to save it.

1. First of all, immediately turn off the power of the laptop system, and remove the power cord and battery at the same time.

2. Use a clean rag or tissue paper to wipe the liquid on the surface of the laptop keyboard and the machine.

3. Move the laptop near the sink and tilt the laptop 90 degrees to pour out the liquid remaining inside the computer system and keyboard.

4. Use a clean rag or tissue paper to wipe the liquid on the surface of the keyboard and the machine again.

5. Let the laptop stand for 24 hours to dry the liquid inside, and do not use a hot air dryer to dry the case to avoid overheating and deformation.

6. Reconnect the power of the laptop and try to turn it on, if it can be turned on normally, please back up the important data in the computer first

7. Regardless of whether the laptop can be used normally, it is recommended to contact the notebook after-sales service immediately after the test and arrange inspection and maintenance, so as to avoid sudden failure caused by oxidation and rust.

Into the water, find a way to dry it as soon as possible, quickly shut it down, take out the battery, use a dry paper towel to absorb the water clean, if it can not be uncovered after the shutdown and then put it in a windy place to blow for a few hours, but do not use too high a temperature to bake it or blow it with a hot air blower, do not rush to start the use, find a professional to deal with.

If the mobile phone accidentally gets into the water, you can try the following ways to deal with the mobile phone urgently to avoid secondary injury:

1. Please take it to a dry and ventilated place as soon as possible, and use a dry paper towel or towel to blot the water stains on the surface of the mobile phone.

2. If it is in the power on state, please press the power button to turn it off; If your phone is turned off, don't try to turn it on.

4. Please bring it to the after-sales department of the mobile phone brand for testing and processing as soon as possible to avoid unnecessary losses.

2. Please do not bake with a hair dryer or stove after water ingress, so as to avoid liquid flowing into the inside of the mobile phone and damaging the mobile phone at high temperatures.

3. Some can be turned on and used normally after simple treatment, but they are composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn on the machine.

4. During the after-sales maintenance process, the data may be lost, it is recommended to ask the staff how to back up the data.

Look what kind of machine it is, only open 100-500 is enough, but it will definitely change something for you, and then clean and clean, about 300.

Disassemble and clean the motherboard separately at about 100 yuan, and you can generally see if there is a problem with any components on your board.

Shutdown. Try again when it's dry.

If it doesn't work, it will have to be repaired, and if you bring water and electricity, it will burn out the hardware.

1. The most important thing after water ingress is to cut off the power immediately, that is, to unplug the battery and power supply, and the water is most afraid of continuing to be charged.

2. Remove the motherboard and thoroughly clean and dry the motherboard and keyboard.

3. Before the motherboard is thoroughly dried, be sure not to power it on and turn it on again, as it may cause new damage every time you power it on.

4. Most of the general power-off technology can be repaired if it is handled in place. If it doesn't work after processing, you need to find a good technical repair to actually repair it, it may be that the motherboard is burning, and answer any difficult hardware failures of the laptop.

The water gets into the motherboard, and taking it to fix the JS will make you have to change the motherboard.

The first time the water enters is to shut down, unplug the power, and remove the laptop battery.

Then it is to disassemble the machine to clean the inlet water completely, and clean the part involved in the ingress water, otherwise it is easy to corrode various electronic parts.

The laptop got into the water, and you need to take it for repairs as soon as possible.