What should I do if the computer freezes the screen freeze and the mouse and keyboard cannot be type

Updated on number 2024-02-27
9 answers
  1. Anonymous users2024-02-06

    Freeze frame is also a type of computer freeze.

    1. The antivirus software is installed more, and all the monitoring is turned on, less monitoring is turned on or not monitored, and the virus is often checked and killed.

    2. The software or driver is not compatible with the system, reinstall or upgrade the driver.

    4. Memory, graphics card, and voltage instability can also cause crashes (if the memory is too small, add a memory module).

    5. The temperature of common hardware such as CPU or graphics card is too high, which is most likely to cause card and crash.

    6. If the hard disk has bad sectors, use software to repair the bad sectors of the hard disk, format the hard disk, repartition and reinstall the hard disk, and replace the hard disk.

    7. Upgrading the hardware causes an incompatible crash.

    8. Too many junk files, too many disk fragments, etc.

    9. If it always doesn't work, it is recommended to overhaul it.

    If it is a boot card: you can disconnect the network cable to boot and try, if there is no problem, it is caused by slow boot networking, and it has nothing to do with the system. If it is still like that, use the software to optimize the power on and off speed, it still doesn't work, it is recommended to restore the system or reinstall.

    If it doesn't work, format the hard drive and repartition it to reinstall it (if it's a network problem, try setting a fixed IP).

    Computer crash or card is generally caused by software and hardware, software, driver, system caused by easy to solve, due to hard disk or hardware incompatibility caused by not easy to solve, find the fault ** is also more difficult, if so, it is best to overhaul it.

    If you play a game card, it is much more complicated, such as: problems with the game itself, configuration problems, high hardware temperatures, small memory, inappropriate drivers, etc.

  2. Anonymous users2024-02-05

    It may be that you are working on too many tasks at the same time, or the current program is too resource-intensive and the computer cannot load.

  3. Anonymous users2024-02-04

    Redo the system, or replace the hardware that you think is problematic and take a look.

  4. Anonymous users2024-02-03

    There are several possible reasons why your computer freezes:

    1.Caused by voltage instability.

    2.Caused by configuration problems, it is recommended to find a friend who studies computers.

    3.Caused by running too much software.

    There is too much software in the disk, which indirectly affects. You can use the PC Manager software moving function to move the software from the C drive to other disks.

    5.Poisoned or Trojan horses, it is recommended to immediately check and kill them all.

    Hope it can help you solve the problem.

  5. Anonymous users2024-02-02

    How often is this still the case???

  6. Anonymous users2024-02-01

    The phenomenon of the landlord's computer crashing is caused by the memory configuration;

    The memory configuration must conform to all three of the following principles:

    1. Total capacity.

    Must be 2 to the nth power, e.g. g;

    2. The total number of records.

    Must be 2 to the nth power, e.g. bar;

    3. Chips. It must be a memory module of the same specification, the same capacity, the same frequency, the same process, and the same batch produced by the same manufacturer;

    If any of the above three jumps are violated, there will be memory incompatibility, which will reduce the running speed of the whole machine, and frequently cause a series of puzzling fault phenomena such as boot difficulties, crashes, automatic restarts, blue screens, and black screens.

    The frequency of the owner's memory module is inconsistent, and all the phenomena of incompatibility will inevitably occur;

    It is recommended that the landlord use a single memory module, which can be the most stable and reliable computer to work, and the lowest failure rate.

  7. Anonymous users2024-01-31

    Reinstall the system first, if there is no improvement.

    There could be two reasons for this.

    First, there is a lot of dust accumulation in the chassis, silicone grease is dry, and the CPU and graphics card are caused by poor heat dissipation. At the same time, the temperature monitoring software is turned on.

    The second is that some supernatural and strange problems are often caused by the power supply, your power supply is estimated to be rated at most 250W, and 9600GT and 4000+ power is not small, with long-term use, the components are aging, and the estimated power supply is not enough. It is recommended to replace the power supply of 350W rated well-known brands such as Huntkey Antek, etc., which is also convenient for future upgrades.

  8. Anonymous users2024-01-30

    Tear down a memory module and try it to see if it is an incompatible memory module. Check the CPU temperature when it crashes, and if it's fake death, you can check the CPU occupancy when it crashes.

  9. Anonymous users2024-01-29

    Is the machine just bought or used for a long time, if it has been used for a long time, it may be that the fan and heatsink have accumulated too much dust, the CPU heat dissipation is not good, and it is caused by overheating, please stop and clean up immediately, or the memory is loose, and then it is a virus, and the system files are damaged.

Related questions
13 answers2024-02-27

Your problem should be that there is a problem with your hard drive. Unless the hard drive and motherboard are not compatible. You set the hard drive to a compatible IDE mode and see. When your hard drive is installed on another machine, the blue screen is caused by the driver in your system and the driver in someone else's machine does not match the number.

11 answers2024-02-27

There are many reasons, which are divided into software failures and hardware failures, 1. Hardware. >>>More

9 answers2024-02-27

It is unlikely that a computer crash in the DCS system will cause the entire network to be paralyzed, but it should be caused by a defective design, or an error in the communication settings or communication cables. The initial inference is that it is a communication failure, please investigate whether the computer crashes or the communication failure first, whether the DCS controller and the indicator lights of each module are normal, whether the switch is normal, whether the network cable and connector are intact, rule out the cause of the switch and module, and then lock the problem on the computer, check the correct computer software settings, and then check the hardware, focusing on the network card, some DCS systems will monitor the network when designing, and execute the corresponding procedures. >>>More

43 answers2024-02-27

As mentioned above, the crash is caused by hardware or software. >>>More

14 answers2024-02-27

Remove the system, implicit and read-only attributes of the Chinese part of the C drive. >>>More