What are the installation methods of wall plaster molding?

After we bought a house, many people now use plaster lines to decorate the walls, and the following is about the selection of plaster lines on the wallWall plaster line installation method

1. Look at the ** level.

To know the truth of "a penny, a penny", the bottom line of gypsum is generally cheaper, because it is lower and more attractive to consumers, and the gypsum of this line will have obvious defects for a long time after installation, such as cracking.

2. Look at the thickness of the item.

The thickness of the plaster line must be uniform to ensure the integrity and safety of the service life and service life. If the decorative product of the plaster line is too thin, it will not only be used in a short time, but also affect safety.

3. Look at the depth of the pattern.

The product pattern of the plaster line can exceed 10 mm. After installation, the surface should be painted to maintain the three-dimensional effect and better reflect the decorative effect. The effect will be worse if the pattern of the decorative product of the plaster line is light, only about 5 to 9 mm.

4. Percussion sound.

You can gently touch the plaster line. If the sound is muffled, it means that it is a poor quality plaster line. If the sound is clear, it means that the quality of the plaster line is good.

Also, check the elasticity of the drywall, you can touch it with your hands, it makes a very strong sound, indicating that the drywall is durable. If the sound is very empty, the board has an empty drum and the texture is not good.

1. Before installation, clean the walls to avoid uneven impurities and shorten the service life of the gypsum line.

2. When splicing the gypsum line, check whether the surface patterns are connected to each other, because some walls are uneven, which will make the general pattern uneven. At this point, the top of the plaster line needs to be adjusted.

3. You can apply sticky dust to the surface of the plaster line, and then clean the water with a brush before drying to clean the surface of the plaster line.

4. After pasting the plaster line, you can check if there is any gap in the transfer. If so, timely repair can make the plaster line and the wall visible as a whole.

Wall plaster line installation methodOnce the material is dry, it can be repaired and polished with a mold. Plaster lines are more aesthetically pleasing and durable.

Do you know how plaster moulding is installed? Explain the whole installation process to you, don't make a mistake.

Plaster linesJust like a girl's beauty camera, it is an indispensable aesthetic decoration on the roof of home decoration, not only its interior can be included through the water pipe, but also has the functions of fire prevention, moisture-proof, heat preservation, sound insulation, and heat insulation. So, how can the installation of plaster top corner lines improve aesthetics and practicality? The following is an introduction to the correct installation method of the gypsum top angle line, hurry up and get it!

At present, the installation of gypsum top corner line mainly adopts the adhesive method, and when installing gypsum decorative corner line, the surface of its base layer is required to be flat, firm and dry.

Before installation, it is necessary to scrape putty on the wall and top surface to level it, and pop up the installation control line on the wall and top according to the width of the corner, and the adhesive of the gypsum corner line is a quick adhesive.

When installing Huai Duxiao, first scrape the glue within the width of the inner side of the control line, and then scrape the glue on the bonding surface of the gypsum corner line to fill the cavity in the bonding surface of the gypsum corner. Place the line in the control line, compact it by hand, and clean up the spilled glue in time to prevent contamination of the line surface.

The joints installed at the angle must be parquet, and the parquet should be cut on the ground first to ensure the integrity of the pattern. The lines on both sides should be kept smooth, and the joints should be smoothed with gypsum putty, and the gypsum putty should not destroy the pattern of the lines. The corners should be planed into slopes according to the size of the angle, and the parquet treatment should be carried out.

Although the installation of the plaster diagonal seems to be simple, it is not simple in the actual operation process, and some of the key precautions must be paid attention to, otherwise it will affect the results of the entire plaster diagonal.

6 major problems to pay attention to during installation:

1. The shape, raw materials and standards of the gypsum line should meet the requirements of the contract and the rules of the current standards.

2. It is necessary to nail the gypsum line to be fixed on the wooden square at the top corner of the bottom layer, and the screws used must be rust-proof.

3. The gypsum decoration line should be flat and straight, and there should be no deformation, cracks and stains. There are no significant traces of the place to be reached.

4. Before installing the gypsum line, the wooden peg should be punched on the wall, fixed with anti-rust screws and bonded with quick-adhesive powder, and the anti-rust wood screws should reach the gypsum line, and then smoothed with gypsum putty.

5. In order to use the splicing of the gypsum line tightly, the gypsum line should be cut with a simple point of view mold, and the closed joint should be filled with putty and smoothed.

6. Strictly avoid the damp transformation of gypsum flower ornaments after encountering water.

Gypsum top angle line is an indispensable aesthetic decoration in home decoration, the correct installation of gypsum top angle line will be directly related to its appearance beauty and usability, so I hope the above introduction of the installation methods and precautions can help you, since you want to be beautiful, then we have to be beautiful thoroughly, exquisite and flawless!

Gypsum lines are generally used in interior decoration, this kind of gypsum lines can have a variety of patterns, practical and beautiful, low-cost, with fireproof, moisture-proof, heat preservation, sound insulation, heat insulation and other functions, with a good decorative effect. The following is an introduction to the selection method of gypsum lines and how to install gypsum lines.

The choice of plaster lines is a comic method.

1. Look at the high and low.

To know a truth, "you get what you pay for", inferior gypsum line is generally cheaper, because low is more attractive to consumers, and this gypsum line will have obvious defects after a long time after installation, such as yellowing, cracks, etc.

2. Look at the thickness of the product.

The thickness of the plaster line should be uniform, so as to ensure the integrity and safety of the service life and service period. If the gypsum line decoration product is too thin, it will not only have a short service life, but also affect safety.

3. Look at the depth of the pattern.

The concave and convex pattern of gypsum line products can be more than 10mm, and after installation, it should be treated with paint on the surface, so as to maintain a three-dimensional sense and better reflect the decorative effect. If the pattern pattern of the gypsum line decoration product is shallow, only about 5 9mm, the effect will be much worse.

4. Tap to listen to the sound.

You can gently tap the plaster line, if the sound is muffled, it means that it is inferior plaster line, if the sound is brittle, it means that the plaster line quality is good. In addition, check the elasticity of the gypsum board, you can hit it by hand, and make a very solid sound to indicate that the gypsum board is strong and durable, such as a very empty sound, it means that there is a hollow drum phenomenon in the board, and the texture is not good.

How to install plaster lines.

1. Before installing the gypsum lines, the wall should be cleaned to avoid too many impurities causing the gypsum to be uneven, which reduces the service life of the gypsum lines.

2. When splicing gypsum lines, it is necessary to check whether the surface patterns are connected together, because some walls themselves are uneven, which will cause the overall pattern to be uneven, and the top angle of the gypsum line needs to be adjusted.

3. You can apply sticky powder on the surface of the gypsum line, and then use a brush dipped in water to clean the surface of the gypsum line before drying.

4. After the plaster lines are pasted and dressed up, you can check whether there is a gap in the transfer place, and if so, you should repair it in time, and then make the plaster lines and the wall look like a whole.

5. After the materials are dry, you can use molds to repair and polish, so that the plaster lines are more beautiful and more durable.

Nowadays, many owners will use gypsum lines for the decoration of the living room ceiling, and the gypsum lines have many advantages such as fire prevention and moisture resistance. So how to decorate the decoration gypsum line has become a lot of people are very questioned, and what are the key points of the decoration gypsum line is not very well understood, so let's introduce it to youPlaster linesThe main points and plaster lines how to decorate it.

First, the decoration points of gypsum lines

1. When is the base treatment in place, when is the gypsum line appropriate? Only the basic treatment is up to standard, is an important prerequisite to ensure that the gypsum line construction meets the standard, how to reach the standard? First of all, the wall must be inspected and repaired with a ruler, and secondly, the top surface of the wall has been scraped with putty twice, and the visual surface is smooth without protruding or recessed parts.

2. Gypsum line construction sequence: the construction of the front first, starting from the front, only in this way can we ensure that the front joint is less, and put the less than half of this kind of part in the inconspicuous part.

3. During construction, do fast sticky and quick adjustment, adjust while fixing, make up the place in place in a short period of time after adjustment, clean up the place to the rock trap, and then clean it with clean water to ensure that the decorative surface is clean and tidy.

4. The corner and the joint part is the top priority of the construction, the drift of the work is not beautiful from this point can be easily found, usually the gypsum line joint part must be scraped gypsum, and then docked up, pay attention to whether the pattern is correct when docking, the height is consistent enough, followed by the gypsum line as a whole to a line can not be in and out of the wall to go, the low part needs to be straight with gypsum, and then use clean water to clean the gypsum line surface of the gypsum line, so as not to be able to clean up later.

Second, how to decorate the plaster line

1. First of all, clean up the original putty powder in the part that needs to be installed, apply water with a roller and shovel it off with a shovel.

2. Rough reading can prevent the installed gypsum line from falling off, and then use an ink fountain to play the ink line on the wall at the top corner, if the height is not known, you can use a section of line to draw it on the top corner, and then measure the length of the wall, and use a hacksaw or a knife to see the total length of the gypsum line, and figure out the up and down of the gypsum line.

3. Stand up the gypsum line, saw both ends at a 45-degree angle, mix the gypsum powder with water, not too much, otherwise it will be hard to fall, and scrape evenly on both sides of the gypsum line, and then two people hold up the ink line position on the wall on the wall of the gypsum line, hold it down for 3 to 5 minutes, and mix the gypsum powder in the unsealed place of the joint part.

Gypsum lines are now used when people decorate, it is one of the decoration materials, so the key points of gypsum lines and how to decorate gypsum lines, everyone understands it through the introduction of the above small envy.

With the continuous development of society, people's living standards are also constantly improving, the quality of life is getting better and better, now many people in the home decoration are on the surface of the ceiling in the installation of some lines, the decorative effect is very good, there are many types of lines, gypsum lines is one of them, then,How to install plaster linesThis? How much is a plaster line**?

1. How to install gypsum lines?

1. Installation process of bonding method:

1) When installing the gypsum line, the putty of the base must be removed, and the cement mortar plastering layer will be exposed, which is very important, so as to avoid the situation that the gypsum line continues to fall off. Using glue to adjust the sticky powder quickly is the kind that can be adjusted at any time, which avoids more waste. Point installation can be adopted, but the point interval should not be too large.

The most important thing is that after the line is attached to the corner of the wall at an angle, it must be pressed hard for more than a minute. Apply the squeezed instant adhesive powder with your fingers to fill in the gaps that can be seen.

2) Then you can use a brush dipped in water to clean the surface of the plaster line. If you wait until it is completely dry, it will be difficult to handle smooth and flat.

2. Nail line installation process:

1), first in the gypsum line mold on the line of the bad place to drill 2 10 mm holes, for example, the slag is 2 meters long, from the 2 to the middle of the 55 cm place, and then put it in the position to be installed with a pencil to draw the position of the 2 holes drilled, take it down, drill the hole with a 10 mm electric hammer, put the plastic plug or wooden stopper, a person press the gypsum line, a person with a self-tapping nail to fix it.

2), the corner of the wall first fixed wood, the wood needs to be processed into a slope according to the size and shape of the gypsum line, the gypsum line is drilled, and then fixed with tapping nails from the land.

Second, how much is the plaster line**.

1. European-style gypsum line Roman column line gypsum corner flower relief wallflower ceiling wall background decorative flower corner lamp plate, reference price 5 yuan.

2. Decorative lines, ps, door sleeve line, European TV background wall, edging, photo frame, frame line, flat bottom baseboard, direct sales, reference price.

3. White gypsum line cultural brick TV background decorative wall tile modeling antique brick Roman column head cultural slate living room, reference price 25 yuan.

European-style PS foam decoration yin corner line, top corner line, ceiling angle line, wall corner line, manufacturer line, baseboard, reference price 3 yuan.

5. Sanbaoshu solid wood lines European living room TV background wall frame decorative wood lines white edge lines, reference price 10 yuan.

6. Chinese-style wood molding, decorative lines, carved background walls, solid wood flat lines, European-style ceiling edge sealing, and corner lines are customized, with a reference price of 25 yuan.

The above is how to install the plaster line introduced to you? How much is the gypsum line**, if you want to know how to install the plaster line, you can refer to the introduction for you, I hope it can help you.