How do you connect the network cable? How do I connect the network cable? How to use the Internet?

Buy a router, three network cables, one end to the LAN port, one end to the computer, and then connect the cat and the router through the WAN port (the line connected may have the router or buy one yourself) After the hardware equipment is connected, start to set up the router. Enter or other IP on IE to see the router manual) Enter the router settings interface,Enter some passwords you want to use to surf the Internet according to the prompts, etc.,That's basically it.,The next time you turn on the network, the network will be automatically connected.,All three can go online!

Generally, ADSL is separated from the ** line and connected to the cat, and then the cat is connected to the router, and then the three computers are connected to the router.

In fact, you can ask the telecom staff to come to your door to help you get it.

Go buy a fool-style router, enter into the routing settings, and set up pppoe, pppoe is the password you give you when you surf the Internet or something, this**has**.

Also, what's wrong with high school, it's not because you're worse than others, you can succeed in anything as long as you work hard.

The Fangchong rock method is as follows:Tools Raw materials: network cables, computers, gateways.

1. [Step 1] First of all, we must prepare our network cable, as shown in the figure below, the network cable should be guaranteed to be complete and not damaged.

<>4. [Step 4] Then find the gateway, the three yellow ports pointed by the arrow, you can choose any access network cable.

5. [Step 5] The following figure has connected another port to the gateway.

6. [Step 6] Then, we can see a "computer" icon on the computer, which is also the symbol of our network with a network cable.

The steps to connect to the broadband network are as follows:

Operating tool: MagicBook 14.

Operating system: Windows 7

Operational version: 1909.

1. Take the win7 system as an example, click the [Start] button on the computer, and then click the [Control Panel] button.

2. The [Control Panel] window pops up, and click [Network and Sharing Center].

3. The [Network and Sharing Center] interface pops up, and click [Set New Connection or Network] on the right, as shown in the figure below.

4. The [Set Connection or Network] window pops up, and click the first item [Connect to Internet]. And ruined.

5. Click [Next] to pop up the [Connect to Internet] window, if you have already connected to a network, then select the second [Still set up a new connection] button and click.

6. Select the dusty circle [broadband PPPOE] connection mode.

7. The interface of setting broadband account password will pop up, and you can click the [Connect] button to connect to broadband after filling in the broadband account and password.

For modern people, the network is indispensable for life and work, and the connection between people also depends on the connection between network cables, so every family will be equipped with wireless networks, routers and the like. At this time, it is inevitable that you will encounter the situation that you need to connect two network cables together, so how to connect the network cable and the network cable? Let's take a look with Qeeka Home experts.

1. How to connect the network cable and the network cable.

First, peel off the outer skin of the two network cables, and distinguish the wires of different colors; Then use crimping pliers to peel off the wire of the same color about 2 cm, and twist the metal parts together and weld them; Then wrap it with insulating tape; Finally, connect the wires of various colors one by one, and wrap the entire wiring with a rubber sleeve or insulating tape.

Second, how to buy a home network cable.

1. Look at the packaging.

There are differences in the packaging identification of different specifications of network cables, for example, families generally choose super five types of network cables, at this time, you need to pay attention to whether there is a cat5 logo on the packaging, if not, the quality of the network cable can not be guaranteed. There is also a length mark on the package, which can be convenient for users to calculate the amount, and the length of a box of network cables should be 305 meters.

2. Look at the resistance.

Generally speaking, the smaller the resistance, the longer the service life, the safer, and the smaller the loss, so you can measure the resistance first when buying to see if it is within the standard range.

3. Look at the appearance.

The appearance of the network cable can also judge the quality, most of the home network cable has been twisted pair-based, that is, two copper wires wrapped in different colors of insulation layer twisted together, this kind of network cable is relatively high-quality, can avoid other network signals, electromagnetic waves and other interference, at the same time it can also ensure the lossless transmission of internal radio waves.

Summary: The above is about how to connect the network cable and the network cable, and how to buy the home network cable, I hope the content shared can give you some reference, if you want to know more about the relevant knowledge, you can **** Qijia information.

3. Finally, connect the device to the computer and plug in the network cable to use it normally.

The specific steps of the network cable crystal head connection sequence are as follows:Tools: Ethernet cable, crystal head, pliers.

1. First of all, cut off the wide skin of the messy stove outside the network cable, which can be generally controlled at about 3cm.

2. Untie and sort the network cables, in the order of white orange, orange debate, white green, blue, white blue, green, white brown, brown.

3. Then sort out the network cable and cut it neatly with network cable pliers.

4. Make the copper piece of the crystal head face you, and pass the network cable through the crystal head.

5. Finally, use the network cable pliers to press the crystal head.

PrecautionsIf the two parties of the connection are not in equal status, use a parallel (pass-through) line, such as a computer to a router or switch, or a crossover line if the two devices are connected, such as a computer to a computer. It's okay to connect the same, because the general network cable is only used for others, even if it is not connected, it can be used.

The above content reference: Encyclopedia - network cable crystal head connection.

The network cable is connected by white orange, orange, white blue, blue, white green, green, white brown and brown, and the length is in meters, and it can be used. This is because the length is very short, and there is not much interference between the network cables. When the length is more than 10 meters, the wrong connection method will cause a large near-end crosstalk of the network cable.

Crosstalk can be minimized by the twisting of the cables, so that the signal coupling is mutually suppressed. When there is an error in the installation link, this mutual suppression can be broken and excessive crosstalk can be generated. A typical example of this is the case of tandem in which two different pairs of wires are reassembled into new transmit or receive pairs, thus destroying the effect of the twist to eliminate crosstalk.

For 10m network transmission, if the distance is not long, the impact of the existence of Shen winding is not obvious, and sometimes it even feels that the network is running completely normally, but for 100M network transmission, the existence of string winding is fatal.

If the line is connected according to the following line pair order, it is a string, that is, white orange, orange, white green, green, white blue, blue, white brown, and label. Wiring in this way will cause great network collision and frame verification errors, which will affect the transmission performance of the network, and even cause network paralysis.