What are the solutions to the computer not connecting to the Internet?

0 first check if there is a network Many times, the computer does not have a network, it may not be a problem with the computer, but a problem with the network itself.

If it is a broadband problem, please call the broadband customer service ** and ask them to check for you. If it is a router problem, please call the brand router customer service for **consultation, they have **guidance.

1) If it is a problem with the broadband itself, first directly connect the broadband network cable to test, if it is a broadband problem, contact the broadband customer service to solve it.

2) If it's a problem with the router, if it can be used originally, it can't be used for the time being, my own practice is to disconnect the power of the router and plug it in, and I'll see later. In there is a factory reset, from the new strict according to the manual settings can be used, I don't understand, it is not recommended to set yourself at will (this is under the premise of the correct physical connection, sometimes the router is slow or failed to find the IP address, not that the router is broken).

If it can't be solved all the time, it is recommended to call the customer service of the router**, they have **** guidance, I encounter a problem that I can't solve by myself, it is very useful to consult the advice they give, and they will give you the right advice for your settings or operations.

3) If you turn off the wireless switch, it's just that, if it's a wireless connected with software, it's normal for the software to be bad and often have problems, there is no better way, use a router. In addition, it is caused by the network card driver is not or is not suitable, and whether there is a problem with the network cable interface or network cable.

4) If it is caused by a system problem, it is recommended to restore the system or reinstall it.

win7810 restore the system, right-click on the computer to select the attributes, on the right side of the system protection, system restoration, follow the steps to do it, if there is restore software, the image backup that comes with it, and the backup, you can also use the software, image backup to restore the system.

5) If you have any questions, please ask me.

If you are not installing the system when you bought the computer, it is recommended to install the system that was pre-installed when you bought the computer.

First, it can be repaired through the computer manager network repair function.

1.Open PC Manager and click Toolbox.

2.Locate the Network Repair Tool.

3.Click "Fix Now".

2. You can also use commands to reset the network.

1.Find "Run" in the Start menu

2.Then enter cmd in it

3.In the command prompt that appears, type "netsh winsock reset.""Press the "Enter" key.

It takes effect after restarting the computer.

There may be many reasons why the computer can not access the Internet, which needs to be analyzed on a case-by-case basis, such as network problems, that is, there is a problem with the operator's line, which requires contacting the operator, and there may be a problem with our router, so we need to replace or reset the router, and there may be a problem with the network card of our equipment, which needs to check the network card, and then there may be a software problem with our equipment, such as a virus, etc., then we need to solve the software problem, soIt should be analyzed on a case-by-case basis according to your specific situation.

Step 2: Then click [Device Manager], [Network Adapter], select the corresponding network card, right-click and select [Update Driver Software].

Step 3: Then click the network icon in the lower right corner, and click [Open Network and Sharing Center].

Step 4: Click [Local Connection], select [Properties], and click [Internet Protocol Version 4].

Step 5: Finally, click [Use the IP address below] on the pop-up interface, set the IP according to the network you are in, and click [OK].

Hope it helps.

Have a great day.

Trouble to give a thumbs up.

Open the wifi icon, click [Open Network and Sharing Center], find the network in use, right-click, select [Diagnosis], the system will pop up the solution after diagnosis, and follow the operation.

2. Click [Change Adapter Settings] under [Control Panel Homepage] in the window to open the network connection.

3. In the network connection window, select [Local Connection] and right-click and select [Disable], and right-click again after a while to select [Open], so that the network of the computer can be restored.

I don't know if it's okay to ask a question.

Asked the question and then.

There are no changes to the tester.

1. Select [Computer] on the computer desktop, right-click and select [Manage], the window of [Computer Management] will pop up, [Services and Applications], click [Services] below, move the mouse to the name list in the middle, and scroll down to find the name [WLAN Autoconfig].

2. After clicking on the name, the service content will appear in the upper left corner, click [Start this service] with the mouse, wait for a few seconds to start successfully, and then see if your network is successfully connected.

Press the Windows key and the R key at the same time, type cmd, click OK, then type "netsh winsock reset" and press the enter key, wait for the display operation to be successful, and then restart the computer for testing. If the above operation does not work, you can try to reinstall the driver of the wireless network card and test it later.

The solution to the computer is not connected to the Internet.

The solutions to the general computer connection can not be connected to the Internet are as follows.

First of all, check whether the account of the computer network is correct?

Secondly, check whether there is any abnormality in the socket of the computer network cable.

Computers not being able to connect to the internet can be a very annoying thing, especially for people who rely on the internet for work or study. Here are some possible solutions:

1.Check your network connection: First, make sure that your computer is connected to the internet.

Open your browser and try to access a **, if the web page does not load, then your computer is not connected to the Internet. Please check your router and modem to make sure they are working properly.

2.Make sure the network adapter is working: Right-click on My Computer on your computer, select Properties, then click Device Manager, and find the Network Adapters item. Make sure that its status shows as "Normal".

3.Reboot Router and Modem: Try restarting your router and modem. Close them and wait 30 seconds before restarting.

4.Check your network settings: Make sure your network is set up correctly on your computer.

Right-click the network connection icon and select Open Network and Sharing Center in the drop-down menu. Select "Change adapter settings", double-click on the connected network, and make sure "Automatically get IP address" is selected under IPv4 attributes.

5.Restart your computer: Sometimes, restarting your computer can fix a number of issues, including network connectivity issues.

6.Update drivers: If the drivers on your computer are outdated or corrupted, it can cause network connectivity issues. Make sure the drivers on your computer are up to date.

7.Add network security: If you're using network security software, make sure it doesn't block your computer from connecting to the internet.

In summary, these are some possible solutions. Before you take any action, make sure that you have backed up all your important files and data. If the problem persists, contact professional technical support or your network service provider.

The computer is connected to the network is displayed without the Internet, which is generally due to network setting problems, and the solution to the problem is as follows

Tools: A computer.

Method 1: 1. Right-click the computer icon on the desktop, select Device Manager, and find the Network Adapter option under Device Manager.

2. Open the NIC driver list, find the current NIC driver, right-click, select Disable, and then click Enable.

Method 2: 1. Right-click on the desktop network, find the attribute option in the drop-down menu, and enter the main interface of network properties.

2. Then in the upper left menu bar of the property interface, you can see the option to change the adapter settings, click to enter.

3. Right-click the local connection option and select Properties to enter the local connection properties dialog box. Then tap on the install option in the bottom left corner.

4. In the pop-up dialog box of Select Network Function Type, select the protocol option, and click the Add button below to add the number of sails.

5. After clicking Add, select ReliableMulticast Protocol in the pop-up network protocol dialog box, and then click OK.

Method 3: 1. Click the start menu in the lower left corner of the computer to find the run option, click to open, enter it in the run text box and click OK.

2. Then find the DNS and DHCP services in the service list, and click to select Automatic in the opening type to complete.

Install the Driver Wizard with a wireless card driver with diagnostics in it.