The router can t connect to the network, the router can t connect to the network?

<>1. The network cable that comes out of the cat is connected to the WAN port of the wireless router (some are called Internet), and the LAN port of the wireless router is connected to the computer.

2. Change the local connection IP of the computer to automatic acquisition (generally do not need to change), open the browser, enter the default address on the back of the router or see the identification on the back of the router), user name and password: admin (some routers need to set a password when entering) After entering, there is a network configuration wizard inside, and you can follow the prompts step by step. Note:

If dial-up to the Internet, select PPPoE and enter the password; If you want to access the Internet with a fixed IP, select Static Internet Access and enter the fixed IP address, subnet mask, gateway, DNS and other parameters given to you by the operator.

3. Select Auto Connect, and it will be connected automatically after power on and off.

4. Select WPA or WPA2 for wireless password.

= Your usage is wrong! First of all, you need to use a wired connection to connect your connection first, that is, use a network cable to directly connect the router and the computer; If so, then second, it depends on whether you open the ** correctly, the connection address of the router is usually, and there are, and even some routers such as telecom use a specified address! Third, there will be a login window after the address is right, and after logging in, you can set the broadband account password, and you can use it If you are not clear, you can continue to ask.

There is a difference between dial-up Internet access and dynamic IP Internet routing.

If you don't use a router, plug this network cable directly into the computer how to surf the Internet, and set up the router according to this.

Now the network cable from the optical modem is directly connected to the Internet, and the Internet access method is the default dynamic IP, no need to set.

The key is that in this LAN port, if it is in the same network segment as the modem, change it to the 2 position is the key, and this number cannot be the same as the number of the previous modem (or router). After changing the save, restart the router once and you will have a network.

What should I do if my router is connected but I can't connect to the Internet?

If you want to use a router to dial the number, you need to change the modem to bridge mode (not all modems can change it), if you want to use the router to expand the network port and the wireless network, your routing address should be changed to not be the same as the modem anyway, and then the route will automatically get the IP.

If the default IP address of the modem and the router conflict, change the routing IP address and try again.

Broadband input is wrong, right? Broadband isn't that long, it's a number, try to re-enter.

First of all, let's see if it's a problem with telecom operators.

The network cable is directly plugged into the cat to dial up the Internet, and it can be connected to the Internet, which means that there is no problem with telecommunications.

Then there is the router problem, restore the factory settings, and try to set the router again.

Ask other neighbors in the community in the group to see if other families are like this, call ** to the mobile company Unicom, and report for repair.

Check the status of the modem.

Or there is a problem with the router.

You can try resetting the route and setting it up again.

See if there's a problem with the network cable.

1. First, right-click the network icon in the lower right corner of the desktop, bring up "Open Network and Sharing Center" 2, and then click "Local Connection".

3. Out of the "Local Connection Status" dialog box Click on Properties 4, out of the dialog box, double-click on version 4

After entering, select "Advanced... Options.

5. Select "Default Gateway" "Add....

6. Input**: Add.

Done, that's one way to do it.

If it doesn't work, there's another trick.

After the above 4 methods. Select DNS

Select Add.

Add these two IP addresses. Finish.

The first is that the routing is not set up, the second is that the computer does not automatically obtain the IP, and the third is that there is a problem with the network cable.

It may be that the router is not set up, the computer does not get the address, or the computer is only successfully connected to the router but cannot connect to the public network.

Router setup issues Broadband dialing. Enter the router IP to establish autodialing.