The computer is powered on and enters the system blue screen, and the solution is reached

Hello. There are many reasons for the blue screen of the computer, if you need further help, I hope that you can provide a specific blue screen** or screenshot.

Blue screen hardware causes and solutions:

1.Poor contact or compatibility of memory modules, unplug the memory module and use the eraser to erase the gold finger and then install it back to try, it doesn't work, swap the memory slot position and plug it back in.

2.The equipment is unstable due to poor board contact or quality problems. Shut down and plug all hardware back in to avoid false connections.

3.Poor hardware compatibility, which is common on non-branded build-compatible machines. There's no good way to do this, after clarifying what is wrong, you can change what you should change.

4.Poor cooling of the computer causes the CPU or graphics card chip to crash due to excessive temperature, including hardware design flaws, such as certain recalled graphics cards or computer parts. Thorough dust removal strengthens heat dissipation of the machine. If it doesn't work, change the fan (radiator).

Blue Screen Software Causes and Solutions:

1.Virus Trojans or malicious rogue programs cause the system to be corrupted. Use Anti-Virus to fully detect and kill viruses.

3.The compatibility of the software itself, the serious conflict between the software incompatibility and the system conflict, the computer crashes. If you install more than 2 software with similar functions at the same time, only one is left, and the others are uninstalled.

4.If you do 1 or 3 steps and still can't solve the problem. It is recommended to reinstall the system using the original image installation version. And update all drivers to drivers with Microsoft digital signature authentication.

If the problem still occurs in safe mode, or if the boot does not pass the self-test smoothly, it may be caused by unstable hardware. It is recommended that you contact the computer manufacturer to troubleshoot the hardware.

If you have recently changed some hardware or hardware drivers, it is recommended to change them back to confirm the problem. Here are some general troubleshooting steps for hardware issues that you can try

1.If you have recently replaced your hardware, please replace it with a new one or a new one.

2.If you have more than one memory module, keep only one and unplug the rest.

3.Whether the heat dissipation is poor, causing the computer to overheat. If so, wait until the computer has completely cooled down before turning it on.

4.Check whether the wiring is loose and whether there is too much dust in the chassis, and fix and clean it.

5.If the power supply is insufficient, replace the high-power power supply.

6.If you are a laptop and encounter a hardware failure, it is best to contact the after-sales service for repair.

If the hardware is still not booted and booted into the operating system after the hardware fault is eliminated. It is recommended to install the operating system of the original image installation version and install all drivers with Microsoft WHQL certification, so that such errors can be corrected.

Good luck and hopefully timely if it helps.

There are many reasons for a blue screen, so record it the next time you blue screen**.

It is recommended that you blow the dust off the main chassis, and if it still doesn't work, please give me your blue screen**.

What is the reason for the blue screen when the computer is turned on**, and how to solve the blue screen when the computer is turned on?

The computer boots up with blue screen, blue screen**: 0 000000edThe steps to solve the problem are as follows: (The demonstration uses an ASUS notebook, and the operation of other brands of computers is roughly the same).

1. Enter the PE system, turn on my computer and enter the C drive.

2. Open cmd input: bcdedit set osdevice boot, and then press the enter key to wait for the operation to complete.

3. Continue typing: bcdedit set device boot, then press the enter key and wait for completion.

4. Continue to enter the command in Figure 3: bcdedit set detecthal 1, and then press enter.

5. Finally, restart the computer.

Let's talk about the specifics, such as booting up to the **blue screen.

The best solution is to install the system.

Unplug the hard disk data cable and plug it in again, if it doesn't work, unplug the data cable and power cable of the optical drive and start it again, if it doesn't work, it is estimated that the hard disk is broken.

The computer boots up with blue screen, blue screen**: 0 000000edThe steps to solve the problem are as follows: (The demonstration uses an ASUS notebook, and the operation of other brands of computers is roughly the same).

1. Enter the PE system, open my Guardian computer and enter the C drive.

2. Open cmd input: bcdedit set osdevice boot, and then press the enter key to wait for the operation to complete.

3. Continue typing: bcdedit set device boot, then press the enter key and wait for completion.

4. Continue to enter the command in Figure 3: bcdedit set detecthal 1, and then press enter.

5. Finally, restart the computer to guess the brightness.

Answer: The blue screen appears when the computer system is turned on, and the error ** is: 0 00000024, this is because the software in the computer is incompatible with the computer system, and there is a conflict, at this time, the blue screen page will prompt that if you encounter this problem for the first time, please reboot it, and after restarting it according to the prompts, you can solve it by the following methods, and the specific setting method is as follows:

1. After turning on the computer, click on the start menu in the bottom left corner, and then find and click on the "Run" option:

2. Then a run dialog box will pop up, enter " in the dialog box, and then click "OK":

3. The "Local Group Policyr" page pops up, and double-click "Computer Configuration" on the right side of the page

4. Select "Manage Templates" and double-click to open

5. Then double-click the "System" option

6. Find "Shutdown Options" on this page, and double-click to open the shutdown options:

7. Find and double-click "Turn off the auto-termination function that will block or cancel the shutdown of the application" on the page, and select Enabled in the pop-up dialog box.

Question: Which one runs on? I can't find it, can I take a photo and send it over? It's best to send all the steps in one go.

1. Turn on the computer and click on the start menu in the lower left corner, then find and click on the "Run" option: (win+r).

2. Then a run dialog box will pop up, enter " in the dialog box, and then click "OK":

3. The "Local Group Policyr" page pops up, and double-click "Computer Configuration" on the right side of the page

4. Select "Manage Templates" and double-click to open

5. Then double-click the "System" option

6. Find "Shutdown Options" on this page, and double-click to open the shutdown options:

7. Find and double-click "Turn off the auto-termination function that will block or cancel the shutdown of the application" on the page, and select Enabled in the pop-up dialog box.

This is the specific step, you can follow the above steps to do it

Question: When the computer was just turned on, there was no mouse display, and I couldn't click on the start menu.

Which one should I order, can you take a picture and send it over? You'd better just take a picture and send it over, or I really can't find it?

Press Enter.

Or press enter to start normally.

Blue Screen**: 0x00000116 Video TDR Error: This problem should be caused by your graphics card driver or the graphics card itself.

If all versions of the driver do not solve this problem, it is recommended to contact the graphics card manufacturer to test whether the graphics card has hardware faults and replace the graphics card.

--The computer I just bought quickly went to change the graphics card, and asked the person who assigned you the computer to change the graphics card.

One; If your computer often has a blue screen, whether you reinstall the system or later reinstall the system, or the blue screen still appears, it means that the hardware is causing the problem. The one that directly affects the hardware of a computer is the memory module or graphics card.

The cause of the problem is the blue screen phenomenon caused by the oxidation of the gold finger of the memory module or graphics card or the poor contact of the slot.

Two; It's a bad sector on the hard disk.,When this computer reads the bad sector,It's stuck.,The background is still running.,CPU occupancy is immediately very high.,And then there's a blue screen.,Solution:In general, Ye Chunwu is repaired with HDD,If you can't fix it,You can only change the hard disk。

Three; Even if the video memory and graphics card or the video memory chip appear virtual soldering, the blue screen will continue to appear, and the method is to add solder to the video memory.

1.Preparation tool: win7 system CD;

2.Put the system disc into the optical drive;

3.Turn on your computer and check if the system disc is read correctly;

4.Restart the computer, the notebook generally press the F1 or F2 or F11 keys;

5.Use the up, down, left, and right keys on the keyboard to select boot, and then press enter bootdevice priority;

6.Change the [Hard Deice] of the 1st bootdevice of the first boot item to a cdrom (some are ***);

7.Press F10 to select OK to remind you to click any vertical key on the keyboard, such as the Enter key, to enter the loading page and start screen;

8.Windows 7 installation interface appears, first select Chinese (Simplified), Chinese (Simplified, China), Chinese (Simplified) - American keyboard, select and click Next, click Installer is starting after clicking Install;

9.Now there is an agreement, check the acceptance of the license terms, tick it, and install it;

10.In the selection interface that appears, select Custom: here select the first partition, the type is System, and then click Next (before this you can format our first partition, in the drive option (Advanced) (a) there), the installation interface appears, and after waiting for a while, the installer will be reminded that the service is starting;

11.Then remind you to restart your computer after the installation process will continue, here it is fully automated;

12.When the screen goes black, the notebook generally presses the F1 or F2 or F11 keys, and then takes out the disc;

13.Use the up, down, left, and right keys on the keyboard to select boot, and then press enter bootdevice priority;

14.Change the [cdrom] of the 1st bootdevice of the first boot item to [hard deice];

15.Press F10 to select OK;

17.After installation, the input user name interface will appear, enter the user name, and the next step will appear after the input password interface, determine whether to enter the password as needed, and then the next step; The Waiter.

18.If you want to enter the key, don't enter it here for the time being, and click Next directly; When the time comes, just activate it with the activation tool;

19.Choose to install only important updates, and adjust the time and select the network;

20.Windows 7 Ultimate is being launched, so it's in the system, and the official version (Windows 7 Ultimate) is perfectly installed.

If it still doesn't work. That's probably a memory issue. Unplug and wipe down. Press it again. If that doesn't work, try the following:

If it is a driver problem, you can use Tencent PC Manager to reinstall, open Tencent PC Manager - Toolbox - Hardware Test - Install Driver or in the software repository of Tencent PC Manager ** Which driver master is used to update the computer drive to eliminate changes. Open Tencent PC Manager - Software Management - Software Repository - Find the required software - **Install - Complete. It's really not good, reinstall, restore the system, you can solve the problem of software slowing down the uproar.

Many times due to the poor compatibility of the system and the driver, such an error will occur, it is recommended to use the Tencent computer manager to reinstall the driver, open the Tencent computer manager family retail --- toolbox--- hardware inspection filial piety test - install the driver, you can link the database with one click, **the latest driver exclusive to your device model.