What are the factors that cause the pronunciation of erhu to be very sand ?

One is that the quality of the bow is not good or it has been damaged for a long time, the second is that your rosin is uneven and not enough, and the third is that the strength on your wrist is not very good.

Generally speaking, you can change the bow on these three points, but I don't think it's necessary to be particularly high-end, after all, our piano is in the middle range, and we also have to consider the bearing capacity of the piano, right?!

Hehe, you change to a similar bow, pay attention to these three points, I believe it will be greatly improved, I don't dare to say it at all.

Hope my advice is helpful to you.

I think the key is the quality of the erhu, and I used to do the same, and it hissed as soon as I reached the top position.

You can change the bow to see, and it is also related to the weather, when the sky is cloudy, the erhu tone is not very good.

The main reason, I think, is the strength of the bow. It's how hard the bristles stick to the strings when you play. Especially when it comes to the lower position, he is willing to have such a problem, and it is necessary to change the bow. But the main problem is the strength of the bow.

The only way to change the erhu is because the erhu of that grade will not have the sound of a high-end piano, and the sound should be mellow, clean, and sensitive.

I used a lot of erhu, and the main reason was that the sound was hoarse. The other bows, saddles, strings, do not change much to the timbre of the piano....Get ready to change the piano, find someone who knows how to pick it with you

You'd better change your bow and try it out, and it has something to do with rosin.

The erhu is used to make the bow hairs rub against the strings, causing the strings to vibrate and produce sounds.

The principle of erhu pronunciation is that the steel strings vibrate, which is transmitted to the saddles, and then vibrate the snakeskin sound, the snakeskin is tight, and this is the tightly jumping snakeskin is the source of sound. The quality of the sound is also determined by the thickness of the snakeskin and the frequency of the vibrations.

The basic structure of the erhu:

Barrel. The barrel is an important part of the erhu, which vibrates the resonant body of the leather pronunciation after rubbing the strings through the push and pull movement of the bow. The texture and shape of the barrel have a direct impact on volume and sound quality.

It is generally made of rosewood or mahogany. The shapes are hexagonal, octagonal, circular, front octagonal and rear round, etc., and the commonly used is hexagonal.

There is a sound window inlaid behind the barrel (usually a carved wood window), which not only plays a decorative role in the barrel, but also has certain benefits for pronunciation, transmission and sound filtration. The barrel is the resonant cylinder of the erhu, generally made of ebony, mahogany (with little rosewood), but also made of rosewood or bamboo, and began to be formed horizontally in the seventies with low foam (ABS) material.

Its shape is predominantly hexagonal, 13 cm long, with a diameter of the foreeyes (88 cm on the opposite side, and in some areas it is made round or octagonal. The waist of the cylinder is slightly thin, and the rear mouth of the cylinder is open or the device has a sound window with various styles of flower holes. The barrel plays the role of amplifying and rendering the vibrations of the strings.

There are several aspects to the pronunciation of erhu "sha": 1. It is not long to learn erhu and there is not enough practice, so it is natural for the sound to sound "sha". 2. The quality of the erhu is cheaper, and the sound is worse than the erhu.

3. The manuscript shed is related to the bow hair; Generally, the erhu uses a white ponytail, which is more supple and smooth, and the sound of pulling it out is better. The black horsetail is rough and easy to break, so it will directly affect the pronunciation of the erhu4 and the bow movement is not stable; The correct way to move the bow should be that the bow hairs are flat and attached to the strings, while the wrong bow hairs are round. These movements will be detected with a little observation, and if they are found, they should be corrected in time.

5. When moving the bow, the wrist movement is not correct, and the spine is accurate, which will affect the pronunciation of the erhu. When drawing the bow, the right wrist should protrude slightly outward and extend outward, and pull the wrist out to the right with the wrist as the first moving point. When pushing the bow, take the big arm to ** as the first moving point, drive the small arm to the left, at this time, the wrist should be in a state of inward flexion.

6. When moving the bow, the strength is not in the middle, and the string pressing ratio is inappropriate, these factors will also lead to the pronunciation of "sand" in the erhu. When practicing, you should try to be natural and relaxed, and you must be flat, straight and even. If you want to make your erhu sound better and better, then you must use the right method at the same time, practice more cherry hail, I wish you a happy learning the piano, thank you for reading.

Question 1: What words can describe the sound of the erhu poignant and complaining.

Question 2: What are the characteristics of erhu? Anyway, it's not unsuitable, for example, the women's 12 orchestra, which was very popular a few years ago, uses traditional instruments to play fast-paced songs is also very good.

Upstairs is right, the sound of the erhu is poignant, suitable for playing lyrical music, not worse than the Western violin at all!

Question 3: What kind of instrument is the erhu and what is the sound of the erhu Erhu is a string music (also a national instrument) that is soft and lyrical.

Question 4: What does the sound of the erhu transmit to our ears It is made through the vibration of the strings, and it is transmitted to our ears through the air.

Question 5: What is the sound of the erhu? Ordinary people don't know about the erhu shed socks, and feel that the sound of the erhu is like the cry of a child, and the erhu can only play a sad tune, but anyone who plays the erhu can feel the beauty of the erhu!!

There is one thing that can be seen: once I was performing, and I heard someone in the audience saying whether it was someone who died. It's disgusting that they think that the erhu can only be pulled when a person is dead.

Question 6: What is the idiom to describe the sound of erhu? If you cry and complain, tell the story. Poignant, melodious, golden iron horse, lively and bright, vibrant, tactful and melancholy.........

Question 7: Why does the erhu sound sad? The status of the erhu in folk music is basically the same as that of the violin in Western music.

Both have a timbre close to the human voice, and both are stringed instruments. However, due to the different sizes of the case and the different design of the sound column, the timbre of the two is different. As for the sad sound of the erhu, the resonance of the barrel is a reason, the timpane of the inner and outer strings is a reason, and the beggars of the street are also a reason.

Since the Tang Dynasty was introduced to the Central Plains, the huqin has continued to find today, which also makes the erhu have a sense of history. The beggars in the streets and alleys also give people a bleak perception of the musical instrument of the erhu. In addition, the traditional repertoire of erhu, including Erquan Yingyue, rivers and rivers, etc., either depicts a bleak life or is based on historical tragic stories, which makes the interpretation even more vicissitudes.

What's more, there will be some technical chains to deliberately aggravate these feelings, such as river water, there will be a technique of pressing and rubbing the strings, so that the sound of the piano is similar to the effect of choking. In fact, erhu can have a lot of new understandings. You can learn about the understanding and creation of some foreign people's understanding and creation of not only erhu, but also Chinese folk music, which is not limited by traditional thinking in China.

For example, a series of works by Jia Pengfang, an erhu player in Japan. There is also a piano and erhu ensemble by Yukiko Isomura and Masao Sakashita's "The Street Where the Wind Lives". This song is good to listen to and good to pull and have good ideas, in the next favorite, I recommend it to you.

Question 8: What does the often said that the erhu sound is transparent and compared with the dull sound.

Summary. Be sure to wipe the strings with a clean, soft cloth after using the erhu at ordinary times, and put desiccant in the erhu box in a humid environment. Rusty strings or too much rosin rubbing the bow hair can cause the erhu to sound mute.

It is necessary to replace the damaged strings in time, and wipe the strings with a clean soft cloth after using the erhu. It is also necessary to apply rosin frequently, and at the same time pay attention to the degree of rosin.

Be sure to wipe the strings with a clean, soft cloth after using the erhu hand stove and put desiccant in the erhu box in a humid environment. Rusty strings or too much rosin rubbing the bow hair can cause the erhu to sound mute. It is necessary to replace the damaged strings in time, including wiping the strings with a clean soft cloth after using the erhu.

Potatoes should also be diligent in rosin, and at the same time pay attention to grasp the degree of rosin.

The hoarse sound of Erji Xianghu is generally caused by damage to the strings, too much rosin, moisture caused by weather, long-term unused or wrong use of Dongzhou Town.