What is the effect of environmental protection air conditioning in the factory workshop? Which compa

The ventilation and cooling of the plant must use Yueneng environmental protection air conditioner, which uses the principle of water evaporation and heat absorption to cool down, and the power consumption is only 1 8 of the traditional air conditioner. The continuous delivery of a large amount of cool and filtered air while discharging the stuffy and dirty air, so that despite the high temperature outside and the large amount of heat generated during the production process, a cool and comfortable working environment can still be maintained in the workshop.

What are the advantages of installing environmentally friendly air conditioners for ventilation and cooling of the plant?

1. Good air quality: environmental protection air conditioning integrates ventilation, ventilation, dust removal and cooling, increases air oxygen content and improves work efficiency. The fresh air operates under positive pressure, filters the dust below 80% microns in the air, removes harmful gases, and effectively prevents "air conditioning disease".

2. Low investment and high efficiency: Compared with environmental protection air conditioners, environmental protection air conditioners are 1 5 of the total investment of air conditioners.

3. Wide range of use: widely used in crowded places, production sites with heating equipment or high temperature heat sources, places with polluting gases, strong odors or dust, and places with high air quality requirements.

4. Low power consumption, only one degree of electricity per hour: Compared with environmental protection air conditioners, the power consumption of ** air conditioners installed in the same area is only about 1 8 of traditional air conditioners.

5. Convenient installation and maintenance: environmental protection air conditioners can be installed along the façade of the exterior wall, with beautiful installation, no indoor space, no need for professional maintenance, and saving maintenance costs.

6. The cooling effect is particularly strong: in the southern region, the general cooling effect can reach 4 10, and the cooling can reach 4 15 in hot and dry areas, and the cooling is rapid.

The cooling effect of environmental air conditioning is very good, and the environmental air conditioning has the function of ventilation, which can continuously send the outdoor fresh air to the room after filtering and cooling through the environmental protection air conditioner, and at the same time discharge the indoor dirty air to maintain a fresh indoor environment. Environmental protection air conditioning only needs 1 kilowatt-hour electricity to cool down an area of 100 to 150 square meters, cooling can reach 4-15 degrees, the operating cost is very low, compared with the traditional compressor air conditioner, the power consumption is only 1 8-1 10 of the traditional air conditioner, environmental protection air conditioning not only energy saving and environmental protection also has the characteristics of ventilation, humidity regulation, good cooling effect, large coverage area, etc., can very effectively improve the working and living environment.

The effect of environmental protection air conditioning is very good, which is not only environmentally friendly but also saves electricity to moisten the Oriental environmental protection air conditioner.

You can find out.

The forest shows that the darkness is dark, and the twilight in the city is cold.

The air volume is large, the wind pressure is sufficient, the wind speed is fast, and the wind distance is long

The maximum air volume is 18,000-36,000 cubic meters per hour.

The quality is excellent and cost-effective

Professional design, careful casting, sufficient power, and remarkable cooling effect.

Stable operation and long service life

New special environmentally friendly anti-aging plastic, smooth shell, design life of ten years.

Low investment, low operating costs and high energy efficiency

Each cold air covers an area of 100-150 square meters, and each unit only uses 1 kilowatt-hour of electricity, which is less investment, low energy consumption and energy efficiency than traditional air conditioners.

Purify the air, adjust the dry humidity, and have a good ventilation and cooling effect

Natural potential evaporative endothermic cooling of the air, high humidity environment, the general cooling range of 4-6, on the contrary dry environment, the general cooling range of 6-10, increase the oxygen content of the air.

Low noise, intelligent control, maintenance-free

Easy to operate, intelligent automation, equipment operation mode status at a glance, peace of mind. Automatic cleaning and washing, fault alarm, abnormal voltage and current alarm, automatic fault identification**.

Eco-friendly air conditioning. For ventilation and cooling of the workshop, Lanqien environmental protection air conditioner is selected.

Plant cooling is generally the use of water blind world rent cold air conditioning, that is, environmental protection air conditioning, basic industrial production type of factories, cooling costs are relatively low also belong to this kind of equipment.

In response to the environmental protection air conditioning industry, Jiafeng in Guangdong and Mozhao Aolan in Fujian are more prominent than the representative plant cooling.

Industrial ** air conditioner for plant cooling. The air-conditioning unit of the plant adopts the first-class air-conditioning unit of the water-source heat pump, through the cooling of electric energy, without burning energy, which not only saves electricity and saves energy, but also effectively avoids the sewage link.

On the other hand, under normal circumstances, the plant is not only installed with first-class air conditioning, but also with a fresh air system. With the use of the fresh air system, the fresh air system not only introduces fresh air to the plant environment, but also optimizes the energy loss in the use of air conditioning, making the air conditioning project more energy-saving when in use.

The main machine inside the workshop can be controlled individually or centrally. Use the computer to control the main engine of the air conditioner, and when no one is working in an air-conditioning area inside the plant, you can turn off the main engine of the air conditioner running in the shouting area. The implementation of computer control, you can freely turn off Zheng Shen lead or turn on the host in a certain area, which saves power for the factory.

In the case of general cooling of industrial plants, the lower cost is to use an exhaust fan, and if it is a high-end one, it is the best air conditioner.

Negative pressure fan, pumping out high temperature and stuffy air to cool down.

Install a negative pressure fan on the wall window of the workshop, force the large number of high-temperature stuffy air gathered in the workshop to be discharged to the outside of the workshop, let the negative pressure situation be formed in the workshop, force the air outside the workshop to pour into the workshop for convection ventilation, reduce the content of high-temperature stuffy air in the workshop, and improve the speed of air circulation in the workshop.

2.The cooling water curtain system refrigerates the air outside the workshop and enters the workshop for secondary cooling.

The cooling water curtain system is installed on the opposite side of the negative pressure fan or the window of the side wall of the workshop, and the supplementary air entering the workshop is cooled by the cooling water curtain for the second time, and the air with lower temperature is forcibly introduced into the workshop for cooling by the negative pressure fanThis method works best with a negative pressure fanIt should be noted that the amount and speed of the air in the water curtain cooling system should be enough to supplement the amount and speed of the high temperature and stuffy air discharge in the workshop, and the sealing of the workshop should be done well, and try to ensure that the air entering the workshop passes through the cooling water curtain system.

3.Environmentally friendly air conditioning, which cools the air outside the workshop and sends it into the workshop for cooling.

The outer wall of the workshop is equipped with environmental protection air conditioning, which is to supply air to the workshop through the fan, and the fresh air outside flows through the wet curtain soaked in water, and the air is in full contact with the water while absorbing the sensible heat in the air focus, so as to achieve the purpose of cooling, ventilation, dust removal, and increasing the oxygen content of the air in the workshop, this scheme is especially suitable for high temperature and crowded places.

It is better to install environmental protection air conditioning + industrial large fan for cooling in the workshop, and the environmental protection air conditioner has the function of ventilation, which can continuously send the outdoor fresh air to the room after filtering and cooling through the environmental protection air conditioner, and at the same time discharge the indoor dirty air to maintain a fresh indoor air environment. Environmental protection air conditioners also have the advantages of rapid cooling, low investment cost, energy saving, and large coverage area. The industrial fan has a large air volume and a wide coverage area, and the single machine can ventilate the workshop area of 800-1600, and the airflow is pushed to the ground in a cone shape from top to bottom, and flows along the horizontal direction to the ground, and pushes up to the roof after encountering the horizontal airflow of the side barrier or near the fan, so as to achieve effective all-round overall ventilation and effective cooling of personnel for the workshop environment.

The high-temperature and stuffy environment of the dedicated factory workshop is improved, and the one-to-one professional customization saves and saves money in the workshop cooling solution.

At present, the most popular is the water curtain air conditioner, which uses water as the medium, which is environmentally friendly and pollution-free. The power-saving driving area is large, the cooling speed is fast, it can be ventilated, purified, ventilated, the installation is simple, and the cost is low. This kind of environmentally friendly air conditioning is particularly popular in workshops and farms.

According to the proposal of the plant cooling equipment to enter the era of the program:

The main function of the negative pressure fan is to ventilate, increase the flow of air, and take away the stuffiness in the air; With the characteristics of penguin wind environmental protection air conditioner (industrial air cooler) to convey cool breeze, blowing into the content of the plant, on the one hand, directly blowing people, on the other hand, the overall improvement of stuffiness.

The workshop is an industrial site, characterized by a large area, a heat dissipation source, and most of them are open and not closed. Therefore, the plant cooling is different from the traditional cooling method, so what way should the equipment be ventilated and cooled when the industrial plant is hot?

1. Traditional air conditioning.

Traditional air conditioner here refers to the large air conditioner used at home, or the large air conditioner in the supermarket. The better ones are: Gree, beauty, Chigo and so on.

This method is characterized by obvious cooling effect, constant temperature and humidity, but the electricity cost is very high, the use cost is high, and it is not suitable for open and large heat source plants, and there is no ventilation effect.

2. Negative pressure fan.

Negative pressure fans take away air heat by promoting air circulation, ventilation has a cooling effect at the same time, and can improve air quality, and low power consumption and low cost of use.

3. Environmentally friendly air conditioning.

Environmental air conditioners, also known as industrial air coolers, are different from traditional air conditioners in that they are not as large as compressors, use water evaporation to take away air heat, and deliver cool fresh air to cool down. Compared with the traditional air conditioner, the cost of use is only 1 8.

This method is characterized by low cost, wide range of use, and there is a heat source, open plant is more suitable, and the air conveyed is still filtered fresh air, which can increase the oxygen content and improve the work vitality of employees.

The better ones in the industry are: Aolan, Jiafeng, Keruilai, etc. At the same time, the cool air under positive pressure can also drive away the hot air and play a role in ventilation and cooling.

4. Miscellaneous. This category includes common methods: fans, large ceiling fans, wind balls, water spraying, etc., but the basic effects of these methods are not obvious, and there are many shortcomings, which can be understood as an auxiliary method.

In summary, considering the characteristics of the industrial plant workshop, as well as the comprehensive consideration of the cost and effect of putting into use, the scientific and effective way should be: negative pressure fan, environmental protection air conditioning, the two kinds of equipment can not only be used separately, but also can be used in combination, to achieve ventilation, cooling one in and one out, heat exhaust and cooling.

Comparison of the effect of cooling equipment in the workshop.

In the hot summer, the workshop cooling has become a big problem, some manufacturers use fans, ice cubes, air conditioners and atomization cooling methods, these cooling methods have certain effects, but also have certain shortcomings.

Fan cooling, has a certain effect, but the temperature of the workshop itself is too high, can not be a good cooling, wind speed cooling is to increase the principle of human epidermal water volatilization to cool.

And because the temperature of the workshop is too high in summer, the wind blown by the fan is hot air, and the temperature blowing to the human body is higher than the temperature of the human body, even if the sweat can volatilize a little and reduce the temperature, but because the workshop temperature is too high, the human body can not completely cool down, so the condition for the fan to cool down is that the air temperature is lower than the human body temperature, and people can feel cool.

Ice cube cooling is the use of ice cube liquefaction heat absorption principle, is the use of ice cube liquefaction needs to absorb the heat in the air, is the air temperature down, but because of the poor air thermal conductivity, resulting in ice cube cooling range is relatively small, if you want to use a large area, the cost is high.

Air conditioning cooling is indeed a kind of obvious effect, suitable for workshop and other sealed environment cooling, but air conditioning cooling because the installation cost and use cost are relatively high, so only high value-added workshops can be suitable for use.

Atomization cooling is also an effective cooling method, but because the humidity is too large, it has a certain impact on mechanical production and human body, so it is not suitable for workshop production. It is a neutralizing cooling method.

A better cooling method is a method of both heat discharge and cooling, only in this way can it be well adapted to the environment where the heat generated by the workshop itself is relatively large, which is the cooling scheme of the combination of environmental protection air conditioning and negative pressure fan.

Environmentally friendly air conditioners (such as Jia Tianxia, Keruilai, Jiafeng, Penguin Wind) convey cool fresh air to neutralize the waste heat and high temperature, and the negative pressure fan discharges the stuffy heat to the outside, and the infinite circulation is very suitable for cooling down the open and large-scale factory workshop.

In terms of actual plant cooling, there is already a very mature system to eliminate the wild case, and the general plant is facing the problem of stuffiness and heat in summer.

Therefore, the cooling of the factory bridge must be: ventilation and cooling at the same time.

In the ventilation of the plant, the negative pressure fan is more commonly used, such as: Detong, Yilida, Jiafeng, etc., with the characteristics of low energy consumption and large air volume, which can discharge the stuffy air in the workshop, and the air circulation takes away the odor and heat.

Then in the process of cooling employees, commonly used environmental protection air conditioners, such as: Aolan, Jiaye Qianfeng, Keruilai, etc., the use of water vapor heat absorption to turn the natural wind into a cool breeze to blow on the employees, 100 square meters of energy consumption is about one kilowatt-hour of electricity, is a more energy-saving cooling method for the plant.