Y type filter installation position is usually installed in front of or behind the valve...

In general, Y-filters.

They are all prepared for the pump, installed at the inlet of the pump, and have nothing to do with the valve, because the filter needs to be cleaned frequently, all the front must have a shut-off valve, so the valve is generally placed in front of the filter.

Y-filter.

Half of it is to protect the pump, and the water source should be cut off when the Y-type filter is cleaned, so the valve must be installed in front of the Y-type filter, and generally 2 sets are connected in parallel. One for use and one for backup. No impact on each other.

There are also fully automatic filters on the market. This is also usually required.

Do it as a bypass. It does not affect the operation of later operations.

It is installed in front of the valve, plays the role of filtration, and is mainly installed at the inlet of the pump and the inlet of the pressure reducing valve.

Of course, it is used in front of the valve to filter solid particles, otherwise the Y-type filter will be very dry!!

Here are some of the well-known brands recognized in the Y-type filter industry that are widely recognized and have a great reputation. While rankings may vary depending on time and market conditions, the following brands are generally considered to be among the top brands in the valve industry:

The following influential first-line brands of water system valves and industrial valves can be used as a reference, but for reference only: Suzhou Neway Valve, Shanghai Guanlong Valve, Shanghai Qizhong Valve, Sanhua, Su Yan, Shentong, Su Valve, Nanfang, Jiang.

First, the word Yao. The above manufacturers are only estimates and references, and the specific situation may vary or fluctuate at any time due to changes in a series of factors such as changes in the market, the size of the competition pattern, and the stability of product quality. As an indispensable key device in industrial production and civil facilities, the quality and reputation of the valve brand directly affect the satisfaction and trust of users.

These brands are known in the valve industry for their innovative technology, high-quality products and reliability. It is important to note that the market and industry are evolving rapidly, and different rankings may vary depending on time and region. For the most up-to-date ranking information, it is recommended to refer to industry reports, professional organizations or market research data for more detailed and accurate information.

In order to keep the protection from foreign objects such as metal and sand from entering the valve and damaging the sealing surface, you need to set up a filter and flushometer. In order to keep the compressed air clean, you need to set up an oil-water separator or an air filter in front of the valve. Considering that the working status of the valve can be checked during operation, it is necessary to set up the instrument and check the valve.

In order to maintain the operating temperature, a thermal insulation facility is installed on the outside of the valve. For post-valve installation, you need to set up a safety valve or a check valve.

It does not belong to the valve. According to the category, it belongs to the hardware category, and in the hardware category, it belongs to pipe fittings. Like valves, they are pipe fittings.

The definition of a valve is: "valve" is a device used to control the direction, pressure, and flow of fluid in a fluid system. A valve is a device that allows the flow of media (liquids, gases, powders) in pipes and equipment to flow or stop, and controls its flow.

The function of the filter is to block the parts that are mixed with other objects in a substance. There is a big difference between the two in terms of function and function, and there are no characteristics of the same property. So, the Y-filter.

It does not belong to the valve category.

The Y-type filter is to add a single-layer filter screen to the pipeline to filter the particulate debris in the pipeline, which is a straight-through filter.

A filter is a filter. Not valves.

Y-type filter is an indispensable filter device for the pipeline system of conveying medium, Y-type filter is usually installed at the inlet end of pressure reducing valve, pressure relief valve, water level valve or other equipment, which is used to remove impurities in the medium to protect the normal use of valves and equipment. The Y-type filter has the characteristics of advanced structure, low resistance and convenient sewage discharge. The applicable medium of Y-type filter can be water, oil and gas.

The general water network is 18 30 mesh, the gas network is 10 100 mesh, and the oil network is 100 480 mesh. The basket filter is mainly composed of a pipe, a main pipe, a filter blue, a flange, a flange cover and fasteners. When the liquid passes through the main pipe into the filter blue, the solid impurity particles are trapped in the filter blue, and the clean fluid passes through the filter blue and is discharged through the filter outlet.

So it's not a valve.

A filter and a valve are two different things, and they can't be mixed.

It does not belong to the valve, but the structure is similar, and the filter is just a layer of filter screen on the basis of the valve.